MGM SEI | Alldatasheet

Document overview

  • Manufacturer or author: LCLOUD
  • PDF pages: 6

Technical content

Rev Date: 5/4/2022 1 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use. MG / MGM / MGE / MGME Series High Voltage Metal Glaze Resistor Stackpole Electronics, Inc. Resistive Product Solutions Features:

  • High voltage capability from 1600V to 7000V
  • Inexpensive high voltage leaded resistor solution
  • High resistance values up to 500M
  • Tolerances as low as 1%; TCRs as low as 50 ppm/ºC
  • Flameproof coating (brown) standard
  • Epoxy coating (blue) available up to 2W
  • MGE and MGME denote alternate epoxy coating instead of silicone
  • 100% RoHS compliant and lead free without exemption
  • Halogen free
  • REACH compliant MG14 MG12 MGM2 Type/Code MGM3 MG1 MG2 MGM12 MGM1 Body Length Body Diameter Lead Length (Bulk) Lead Diameter A B C D Unit Electrical Specifications Mechanical Specifications Maximum Type/Code Working Voltage (V) Silicone Epoxy 1%, 5%, 10% MG14 0.25 1600 2000 400 500 MG12 0.5 3500 4000 500 700 MG1 1 4500 5000 500 1000 MG2 2 7000 14000 700 1200 MGM12 0.5 1700 2500 400 500 MGM1 1 4000 4500 500 700 MGM2 2 5000 10000 500 1000 MGM3 3 7000 14000 700 1200 Ohmic Range (Ω) and TolerancePower Rating (W) @ 70ºC Dielectric Withstanding Voltage (V) ± 100 Maximum Overload Voltage (V) TCR (ppm/ºC) (1) (1) ±50 ppm/ºC available for some values and sizes. Contact Stackpole. 100K - 500M

Rev Date: 5/4/2022 2 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use. MG / MGM / MGE / MGME Series High Voltage Metal Glaze Resistor Stackpole Electronics, Inc. Resistive Product Solutions Performance Characteristics Power Derating Curve: Test Test Specification Test Condition Insulation Resistance ±10,000 MΩ over 500 ± 50V DC during 1 minute, V-Block method Resistance to Soldering Heat ±(1% + 0.05Ω) 260ºC ± 5ºC, 2 seconds ± 1 second Terminal Strength Tensile: ≥ 2.5 Kg Direct load for 10 seconds, in the direction of the terminal leads Discharge Test: 0.01uf capacitor discharge pulse 10 times (1 pulse / 5 seconds max.) Operating Temperature Range: -55ºC to +175ºC 4 times RCWV for 10000 cycles (1 second ON, 25 seconds OFF)Intermittent Overload ±(1% + 0.05Ω) RCWV (Rated Continuous Working Voltage) = No abnormality in coatings and markingsResistance to Solvent IPA for 5 ± 0.5 minutes with ultrasonic ±(10% + 0.05Ω)Anti-surge Characteristics 1000 hours at rated voltage, 70ºC 90 minutes ON and 30 minutes OFFLoad Life ±(3% + 0.05Ω) by type (see Electrical Specification Chart) by type (see Electrical Specification Chart)Temperature Coefficient (TCR) Resistance value at room temperature Dielectric Withstanding Voltage In V-Block for 60 seconds Rated Voltage x 2.5 or Max. Overload Voltage, whichever is lower, for 5 seconds±(1% + 0.05Ω)Short Time Overload 40ºC ± 2ºC, 90% ~ 95% R.H., 1000 hours (for epoxy resin) 90 minutes ON and 30 minutes OFF±(5% + 0.05Ω)Moisture Resistance DC Source C=0.01uF 10KΩ Rx SW 2.5 sec ON 2.5 sec OFF √ P*R

Rev Date: 5/4/2022 3 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use. MG / MGM / MGE / MGME Series High Voltage Metal Glaze Resistor Stackpole Electronics, Inc. Resistive Product Solutions Temperature Rise: Recommended Solder Profile This information is intended as a reference for solder profiles for Stackpole resistive components. These profiles should be compatible with most soldering processes. These are only recommendations. Actual numbers will depend on board density, geometry, packages used, etc., especially those cells labeled with “*”. 100% Matte Tin / RoHS Compliant Terminations Soldering iron recommended temperatures: 330°C to 350°C with minimum duration. Maximum number of reflow cycles: 3. Wave Soldering Description Maximum Recommended Minimum Preheat Time 80 seconds 70 seconds 60 seconds Temperature Diff. 140°C 120°C 100°C Solder Temp. 260°C 250°C 240°C Dwell Time at Max. 10 seconds 5 seconds * Ramp DN (°C/sec) N/A N/A N/A Temperature Diff. = Defference between final preheat stage and soldering stage. Convection IR Reflow Description Maximum Recommended Minimum Ramp Up (°C/sec) 3°C/sec 2°C/sec * Dwell Time > 217°C 150 seconds 90 seconds 60 seconds Solder Temp. 260°C 245°C * Dwell Time at Max. 30 seconds 15 seconds 10 seconds Ramp DN (°C/sec) 6°C/sec 3°C/sec *

Rev Date: 5/4/2022 4 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use. MG / MGM / MGE / MGME Series High Voltage Metal Glaze Resistor Stackpole Electronics, Inc. Resistive Product Solutions Packaging Specifications Recommended Lead Free Resistor Reflow Profile Type/Code B1/B2 S Unit Max. deviation of spacing: 1mm per 10 spacing. FE MG14 MG12 C DA MG1 MG2 MGM1 MGM2 MGM3 MGM12

Rev Date: 5/4/2022 5 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use. MG / MGM / MGE / MGME Series High Voltage Metal Glaze Resistor Stackpole Electronics, Inc. Resistive Product Solutions RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the v arious regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictio ns on Hazardous Substances” (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability o f our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. Tape on Reel/Tape on Box Specifications Tape on Reel Across Flange (A) W (A) H (B) L (C) 2.835 3.150 2.953 10.394 inches 72.00 80.00 75.00 264.00 mm 2.835 3.150 1.811 10.394 inches 72.00 80.00 46.00 264.00 mm 2.835 3.150 2.953 10.394 inches 72.00 80.00 75.00 264.00 mm 3.740 4.055 3.780 10.433 inches 95.00 103.00 96.00 265.00 mm 2.835 3.150 4.134 10.394 inches 72.00 80.00 105.00 264.00 mm 2.835 3.150 1.811 10.394 inches 72.00 80.00 46.00 264.00 mm 3.740 4.055 3.228 10.433 inches 95.00 103.00 82.00 265.00 mm 3.740 4.055 3.780 10.433 inches 95.00 103.00 96.00 265.00 mm1000 1000 5000 5000 3000 1000 2000 1000 1000 2000 1000 1000 1000 MGM3 Tape on BoxType/Code Unit MG12 MG1 MG2 MGM12 MGM1 MGM2 MG14 Quantity per Reel Quantity per Box 5000 5000 3000 RoHS Compliance Status MG High Voltage Metal Glaze Leaded Resistor Axial YES(1) 100% Matte Sn Jan-06 04/01 MGE High Voltage Metal Glaze Leaded Resistor (Epoxy Coating) Axial YES(1) 100% Matte Sn Jan-06 04/01 MGM High Voltage Mini Metal Glaze Leaded Resistor Axial YES(1) 100% Matte Sn Always Always MGME High Voltage Mini Metal Glaze Leaded Resistor (Epoxy Coating) Axial YES(1) 100% Matte Sn Always Always Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) Standard Product Series

Description

Rev Date: 5/4/2022 6 www.seielect.com This specification may be changed at any time without prior notice marketing@seielect.com Please confirm technical specifications before you order and/or use. MG / MGM / MGE / MGME Series High Voltage Metal Glaze Resistor Stackpole Electronics, Inc. Resistive Product Solutions 1 2 3 4 5 6 7 8 9 10 M G 1 2 J T 1 0 0 K “Conflict Metals” Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the “conflict region” of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we s upply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to “REACH” We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, “The R egistration, Evaluation, Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order Resistance Value Code Description Code W Code Tol Value Code Description Size Quantity 14 0.25 F 1% MG14, MGM12 5000 12 0.5 J 5% MG12, MGM1 3000 1 1 K 10% MG1, MGM2 2000 2 2 MG2, MGM3 1000 1 Kohm = 1K00 3 3 MG14, MGM12 5000 1 Mohm = 1M00 MG12, MG1, MG2 1 Gohm = 1G00 Only up to 2W MGM1, MGM2, MGM3 B Bulk all sizes 1000MGME Mini Size Epoxy Coating MGM Mini Size Silicone Coating Standard Size Silicone Coating Standard Size Epoxy Coating MG MGE Packaging A Tolerance Four characters with the multiplier used as the decimal holder. SizeProduct Series 1000Ammo E24 T Tape and Reel