Logic IC

MGJ2D152003BSC

Murata Power Solutions ...

5.4kVDC Isolated 2W Gate Drive DC-DC Converters 2023

Manufacturer: Murata Power Solutions ...

Document: 22 Pages / 2Mb

Request Quote Download Datasheet Read online HTML view

More from Murata Power Solutions ... Browse M parts

Online Datasheet

Read MGJ2D152003BSC online.

MGJ2B MURATA-PS | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 22

Technical content

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 1 of 22 www.murata.com www.murata.com For full details go to www.murata.com/en-global/ products/power/rohs SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage 1 Output Voltage 2 Output Current 1 Output Current 2 Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ) Ripple & Noise (Max)2 Efﬁciency (Min) Efﬁciency (Typ) Isolation Capacitance MTTF1 MIL. Tel. V V V mA % mVp-p % pF kHrs MGJ2D051505BSC 5 15 -5 80 40 360 5.7 7 30 50 71 76 3 3136 95134 MGJ2D051509BSC 5 15 -8.7 80 40 390 6 7 30 50 73 77.5 3 2947 86077 MGJ2D051515BSC 5 15 -15 67 67 492 7 8.5 20 35 74 78 3 2164 84961 MGJ2D051802BSC 5 18 -2.5 80 80 410 9 12 20 50 70 75 3 2502 84300 MGJ2D052003BSC 5 20 -3.5 80 80 470 8 11 20 50 72 77 3 2500 86317 MGJ2D052005BSC 5 20 -5 80 40 440 6.2 8 30 50 74 78.5 3 2502 83736 MGJ2D121503BSC 12 15 -3 95 95 170 8 10 25 50 76 80 3 2933 96712 MGJ2D121505BSC 12 15 -5 80 40 150 4.7 6 30 50 75 80 3 3093 105983 MGJ2D121509BSC 12 15 -8.7 80 40 155 5.3 7.5 30 50 76 80 3 2760 95198 MGJ2D121515BSC 12 15 -15 67 67 203 6.0 8 24 40 78 82 3 2194 96436 MGJ2D121802BSC 12 18 -2.5 80 80 170 8 11 20 50 74 80 3 2175 85409 MGJ2D121805BSC 3 12 18 -5 80 40 170 5.2 8 20 50 74 81 3 MGJ2D122003BSC 12 20 -3.5 80 80 190 7 10 20 50 77 82 3 2373 89831 MGJ2D122005BSC 12 20 -5 80 40 195 5.5 8 30 45 78 82 3 2417 93548 MGJ2D151505BSC 15 15 -5 80 40 120 5 7 30 50 75 80 3 2735 90911 MGJ2D151509BSC 15 15 -8.7 80 40 130 5 7 30 50 76 80 3 2769 81620 MGJ2D151515BSC 15 15 -15 67 67 167 5.5 8 23 35 75 79 3 2459 91193 MGJ2D151802BSC 15 18 -2.5 80 80 130 8 11 20 50 73 79 3 2217 77469 MGJ2D152003BSC 15 20 -3.5 80 80 150 7 10 20 50 76 81 3 2379 84696 MGJ2D152005BSC 15 20 -5 80 40 145 6 8 30 50 78 81 3 2052 75638 MGJ2D241503BSC 24 15 -3 95 95 90 8 10 25 50 76 80 4 2629 73130 MGJ2D241505BSC 24 15 -5 80 40 75 4.6 7 30 50 74 80.5 4 2730 64179 MGJ2D241509BSC 24 15 -8.7 80 40 80 4.8 7 30 50 77 82 4 2896 77980 MGJ2D241709BSC 24 17 -9 80 80 105 6 8 30 50 78 83 4 2580 62586 MGJ2D241802BSC 24 18 -2.5 80 80 90 8 11 20 50 74 80 4 2674 75178 MGJ2D241805BSC 24 18 -5 80 40 80 5 8 30 50 76 81 3 2542 77551 MGJ2D242003BSC 24 20 -3.5 80 80 90 7 10 20 50 76 82 4 2256 67350 MGJ2D242005BSC 24 20 -5 80 40 90 6 8 30 50 78 82 4 2227 68908 INPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Voltage range Continuous operation, 5V input types 4.5 5 5.5 VContinuous operation, 12V input types 10.8 12 13.2 Continuous operation, 15V input types 13.5 15 16.5 Continuous operation, 24V input types 21.6 24 26.4 Input reﬂected ripple 051505, 051509, 051515, 052003 & 052005 types 40 mA 121503, 121505, 121509, 121515, 122005, 151505, 151509, 151515 & 152005 types 20 051802, 241505, 241509, 241709, 241805 & 242005 types 15 122003, 121802, 121805, 151802, 152003, 241503, 241802 & 242003 types 10 Calculated using MIL-HDBK-217 and Telecordia SR-332 calculation model with nominal input voltage at full load. 2. See ripple & noise test method. 3. MGJ2D121805BSC variant is in preliminary stages. All speciﬁcations typical at TA=25°C, nominal input voltage and rated output current unless otherwise speciﬁed.

FEATURES

Optimised bipolar output voltages for IGBT/ SiC & Mosfet ga te drives Reinforced insulation to UL62368-1 recognised ANSI/AAMI ES60601-1, 1 MOPP/2 MOOP’s recognition pending 5.4kVDC isolation test voltage ‘Hi Pot Test’ Ultra low isolation capacitance SIP package style 5V, 12V, 15V & 24V inputs +18V/-5V3, +20V/-3.5V & +20V/-5V outputs Operation to 105°C Characterised CMTI >200kV/ȝS Continuous barrier withstand voltage 2.4kVDC Characterised partial discharge performance PRODUCT OVERVIEW The MGJ2B series of DC-DC converters is ideal for powering ‘high side’ and ‘low side’ gate drive circuits for IGBT/SiC and Mosfet gate drives in bridge circuits. A choice of asymmetric output voltages allows optimum drive levels for best system efﬁciency and EMI. The MGJ2B series is characterised for high isolation and dv/dt requirements commonly seen in bridge circuits used in motor drives and inverters, while the MGJ2B extended temperature range and construction gives long service life and reliability.

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 2 of 22 www.murata.com TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Speciﬁcation All output types (see safety approval section for limitations) -40 105 °CStorage -55 125 Case Temperature above ambient 5V input types 24 All other input types 20 Cooling Free air convection ABSOLUTE MAXIMUM RATINGS Input voltage VIN, MGJ2D05xxxxBSC 5.5V Input voltage VIN, MGJ2D12xxxxBSC 13.2V Input voltage VIN, MGJ2D15xxxxBSC 16.5V Input voltage VIN, MGJ2D24xxxxBSC 26.4V Short-circuit protection Continuous Lead temperature 1mm from case for 10 seconds 260°C Wave Solder Wave Solder proﬁle not to exceed the proﬁle recommended in IEC 61760-1 Section 6.1.3. Please refer to application notes for further information. GENERAL CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Switching frequency 45 kHz ISOLATION CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Isolation test voltage Production tested for 1 second 5400 VDCQualiﬁcation tested for 1 minute 5400 Resistance Viso = 500VDC 1 GΩ Continuous barrier withstand voltage Non-safety barrier application 2400 VDC Safety standard UL62368-1 Reinforced 300 VrmsBasic/supplementary 600 ANSI/AAMI ES60601-1

1 MOOP 300

2 MOOP/1 MOPP 200

Parameter Conditions Min. Typ. Max. Units Rated Power TA=-40ºC to 105ºC 2W Voltage Set Point Accuracy See tolerance envelopes Line regulation High V IN to low VIN 1.0 1.2 %/% 1. ANSI/AAMI ES60601-1 recognition is currently pending for the MGJ2DxxxxxxBSC variants.

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 3 of 22 www.murata.com TECHNICAL NOTES ISOLATION VOLTAGE ‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test voltage, applied for a speciﬁed time, across a component designed to provide electrical isolation, to verify the integrity of that isolation. Murata Power Solutions MGJ2B series of DC-DC converters are all 100% production tested at 5.4kVDC for 1 seconds and have been qualiﬁcation tested at 5.4kVDC for 1 minute. The MGJ2B series is recognised by Underwriters Laboratory, please see safety approval section for more information. When the insulation in the MGJ2B series is not used as a safety barrier, i.e. provides functional isolation only, continuous or switched voltages across the barrier up to 2.4kV are sustainable. This is established by measuring the partial discharge inception voltage in accordance with IEC 60270. Please contact Murata for further information. REPEATED HIGH-VOLTAGE ISOLATION TESTING It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials, construction and environment. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from speciﬁed test voltage. SAFETY APPROVAL ANSI/AAMI ES60601-1 The MGJ2B series is pending recognition by Underwriters Laboratory (UL) to ANSI/AAMI ES60601-1 for 1 MOOP (Means Of Operator Protection) based on a working voltage of 300Vrms or 2 MOOP based upon a working voltage of 200Vrms, and 1 MOPP (Mean Of Patient Protection) based on a working voltage of 200Vrms, between Primary and Secondary. File number E202895 applies. UL62368-1 The MGJ2B series is recognised by Underwriters Laboratory (UL) to UL62368-1 for reinforced insulation to a working voltage of 300Vrms and for basic/supplementary insulation to a working voltage of 600Vrms with an ambient temperature limit of 100°C. File number E151252 applies. Creepage and clearance 6mm Working altitude 5000m Fusing The MGJ2B Series of converters are not internally fused so to meet the requirements of UL an anti-surge input line fuse should always be used with ratings as deﬁned below. MGJ2D05xxxxBSC: 1.25A MGJ2D12xxxxBSC: 750mA MGJ2D15xxxxBSC: 750mA MGJ2D24xxxxBSC: 750mA All fuses should be UL recognised and rated to 125VDC. RoHS COMPLIANCE INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 260ºC for 10 seconds. Please refer to application notes for further information. The pin termination ﬁnish on this product series is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The series is backward compatible with Sn/Pb soldering systems. For further information, please visit www.murata.com/en-global/products/power/ rohs

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 4 of 22 www.murata.com PART NUMBER STRUCTURE MGJ 2 D XX XXXX B S C Series name Power rating Output type S - Single D - Dual T - Triple Q - Quad RoHS compliant Package type S - SIP D - DIP M - Surface mount Z - ZIP Input voltage Output voltage Generation designation ENVIRONMENTAL VALIDATION TESTING The following tests have been conducted on this product series, as part of our design veriﬁcation process. The datasheet characteristics specify user operating conditions for this series, please contact Murata if further information about the tests is required. Test Standard Condition Temperature cycling1 JEDEC JESD22-A104 600 cycles in a dual zone chamber from -40 (+5/-10)°C to 105 (+10/-5)°C. 15 mins dwell at each (inclusive of ramps). 2 cycles per hour. Humidity bias JEDEC JESD22-A101 85°C ±2°C, 85% ±5% R.H. for >1000 hours. High temperature storage life JEDEC JESD22-A103, Condition A 125°C +10/-0°C for ≥1000 hours. Vibration MIL-STD-883 Method 2007, Condition A 1.5mm pk-pk / 20g pk min, 20-2000-20Hz, 4 sweeps in each of 3 mutually perpendicular axes at 3 oct/min. Shock MIL-STD-883 Method 2002, Condition A 500g 1.0ms half sine, 5 shocks in each direction of 3 mutually perpendicular axis. ESD JEDEC JESD22-A114 HBM 8.0kV. Bump IEC Class 4M5 of ETS 300 019-2-4 Shock Spectrum Type II, 6mS duration, 250m/s 2 500 bumps in 6 directions. Solderability EIA/IPC/JEDEC J-STD-002, Test A and A1 SnPb (Test A) For leaded solderability the parts are conditioned in a steam ager for 8 hours ±15 min. at a temperature of 93°C ±3°C. Dipped in solder at 245°C ±5°C for 5 (+0/-0.5) seconds. Pb-free (Test A1) For lead free solderability the parts are conditioned in a steam ager for 8 hours ±15 min. at a temperature of 93°C ±3°C. Dipped in solder at 255°C ±5°C for 5 (+0/-0.5) seconds. Solder heat JEDEC JESD22-B106 The test sample is subjected to a molten solder bath at 270°C ±5°C for 7 (+2/-0) seconds. Solder heat (hand) MIL-STD-202 Method 210, Condition A The soldering iron is heated to 350°C ±10°C and applied to the terminations for a duration of 4 to 5 seconds. Solvent cleaning Resistance to cleaning agents. Solvent – Novec 71IPA & Topklean EL-20A. Pulsed ultrasonic immersion 45°C - 62°C. Solvent Resistance MIL-STD-883 Method 2015 Separate samples subjected to solvent A, solvent B and solvent D. Lead Integrity (Adhesion) MIL-STD-883 Method 2025 Leads are bent through 90º until a fracture occurs. Lead Integrity (Fatigue) MIL-STD-883 Method 2004, condition B 2 The leads are bent to an angle of 15º. Each lead is subjected to 3 cycles. Lead Integrity (Tension/Pull) MIL-STD-883 Method 2004, Condition A 1 Pull of 0.227kg applied for 30 seconds. The force is then increased until the pins snap. Aqueous wash Resistance to wash process Parts washed in an aqueous/ultrasonic process, in a suitable chemical for 30 mins at a controlled temperature. Followed by a towns water wash at low pressure and a demineralised water wash at low pressure. Dried in a vacuum oven. 1. MGJ2Dxx1515BSC variants were tested to 400 cycles.

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 5 of 22 www.murata.com CHARACTERISATION TEST METHODS Ripple & Noise Characterisation Method Ripple and noise measurements are performed with the following test conﬁguration. C1 1μF X7R m ultilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC-DC converter C2 10μF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC-DC converter with an ESR of less than 100mΩ at 100kHz C3 100nF multilayer ceramic capacitor, general purpose R1 450Ω resistor, carbon ﬁlm, ±1% tolerance R2 50Ω BNC termination T1 3T of the coax cable through a ferrite toroid RLOAD Resistive load to the maximum power rating of the DC-DC converter. Connections should be made via twisted wires Measured values are multiplied by 10 to obtain the speciﬁed values. Differential Mode Noise Test Schematic OSCILLOSCOPE Y INPUT SUPPLY C1 C2 C3 R1 T1 R2 Input Output DC/DC Converter R LOAD + + - - APPLICATION NOTES Minimum load The minimum load to meet datasheet speciﬁcation is 10% of the full rated load across the speciﬁed input voltage range. Lower than 10% minimum loading will result in an increase in output voltage, which may rise to typically 1.25 times the speciﬁed output voltage if the output load falls to less than 5%. Gate Drive Applications Advisory Note For general guidance for product usage in gate drive applications please refer to “gate drive application notes”. Capacitive loading and start up Typical start up times for this series, with a typical input voltage rise time of 2.2μs and output capacitance of 10μF, are shown in the table below. The product series will start into capacitance ranging from 47μF up to 220μF with increased start times. Start-up time ms MGJ2D051505BSC 3 MGJ2D051509BSC 4.5 MGJ2D051515BSC 21 MGJ2D051802BSC 4 MGJ2D052003BSC 5 MGJ2D052005BSC 5 MGJ2D121503BSC 3 MGJ2D121505BSC 3 MGJ2D121509BSC 4 MGJ2D121515BSC 14.5 MGJ2D121802BSC 5 MGJ2D121805BSC 4 MGJ2D122003BSC 5 MGJ2D122005BSC 5.5 Typical Start-Up Wave Form Start-up time ms MGJ2D151505BSC 2.5 MGJ2D151509BSC 3 MGJ2D151515BSC 10.5 MGJ2D151802BSC 3 MGJ2D152003BSC 5 MGJ2D152005BSC 4.5 MGJ2D241503BSC 3 MGJ2D241505BSC 3 MGJ2D241509BSC 3 MGJ2D241709BSC 4 MGJ2D241802BSC 3 MGJ2D241805BSC 3 MGJ2D242003BSC 4 MGJ2D242005BSC 4

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 6 of 22 www.murata.com EFFICIENCY VS LOAD 5V INPUT 12V INPUT 15V INPUT 24V INPUT 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) MGJ2D121503SBC MGJ2D121505BSC MGJ2D121509BSC MGJ2D121515BSC MGJ2D121802BSC MGJ2D121805BSC MGJ2D122003BSC MGJ2D122005BSC 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) MGJ2D051505BSC MGJ2D051509BSC MGJ2D051515BSC MGJ2D051802BSC MGJ2D052003BSC MGJ2D052005BSC 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) MGJ2D151505BSC MGJ2D151509BSC MGJ2D152003BSC MGJ2D152005BSC MGJ2D151515BSC MGJ2D152005BSC 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) MGJ2D241503BSC MGJ2D241505BSC MGJ2D241509BSC MGJ2D241709BSC MGJ2D241802BSC MGJ2D241805BSC MGJ2D242003BSC MGJ2D242005BSC TEMPERATURE DERATING GRAPH Full OutputCurrent Rating 105400-40 Ambient Temperature (ºC) Safe Operating Area

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 7 of 22 www.murata.com POSITIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES The voltage tolerance envelopes show typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to changes in output loading and set point accuracy. 051509 & 151509 152005 241509 121505 & 241505 151515 051515 Output Load Current (%) Output Voltage Output Voltage Output Load Current (%) 100 100 100 100 100 100 Output Voltage Output Voltage Output Voltage Output Load Current (%) Output Load Current (%) 2% 1% -4% 1% 0% -5% 2% 2% -3% 0% 0% -7% 2% 1% -4% Output Load Current (%) 1% 0% -7% Output Voltage Output Load Current (%)

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 8 of 22 www.murata.com POSITIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES (Continued) 241709 052003 & 052005 122003, 152003 & 242003 051802 121802, 151802 & 241802 121503 241503 121805 3.5% 3% -3% Output Voltage Output Load Current (%) 1% 0% -7% Output Voltage Output Load Current (%) -7% -6% -5% Output Voltage Output Voltage Output Voltage Output Load Current (%) Output Load Current (%) Output Load Current (%) 0% 1% -6%Output Voltage Output Load Current (%) 1% 0% -5%Output Voltage Output Load Current (%) 100 100 100 100 100 100 100

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 9 of 22 www.murata.com POSITIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES (Continued) 122005 051505 & 151505 121509 121515 241805 242005 4% 5% 1% 2%1% 1% -5% -4%Output Voltage Output Load Current (%) Output Voltage Output Load Current (%) 100100 7575 5050 2525 1010 0% 0% -7% Output Voltage Output Load Current (%) 10075502510 10075502510 Output Voltage Output Load Current (%) 3% 2% -4% 5% 4% 1% 1% 1% 1% -4% -4%Output Voltage Output Voltage 100 10075 7550 5025 2510 10 Output Load Current (%) Output Load Current (%)

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 10 of 22 www.murata.com NEGATIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES 052005 151505 121509 & 241509 051505 241505 151515 051515 121505, 122005, 152005, 242005 & 241709 3% 2% -4% 5% 4% 1% 1% -4% Output Voltage Output Voltage Output Voltage Output Voltage Output Load Current (%) Output Load Current (%) Output Load Current (%) Output Load Current (%) 6% 6% 2% 2%2% -3% -4%Output Voltage Output Voltage Output Load Current (%) Output Load Current (%) 1% 0% -7% Output Voltage Output Load Current (%) 2% 2% -4%Output Voltage Output Load Current (%) 100 100 100 100 100 100 100 100 0% 1% -6%

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 11 of 22 www.murata.com NEGATIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES (Continued) 052003 122003, 152003 & 242003 051802 121802, 151802 & 241802 121503 241503 121805 051509 9% 9% 3% 3% 3% -7% -5% 13% 5% 5% 10% 2% 3% -5% -8% -4% 13% 5% 6% -3% Output Voltage Output Voltage Output Voltage Output Voltage Output Load Current (%) Output Load Current (%) Output Load Current (%) Output Load Current (%) Output Voltage Output Voltage Output Load Current (%) Output Load Current (%) 100 100 100 100 100 100 -4%Output Voltage Output Load Current (%) 10075502510

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 12 of 22 www.murata.com NEGATIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES (Continued) 121515 151509 241805 2%2% -4% -3% -3%Output Voltage Output Voltage Output Voltage Output Load Current (%) Output Load Current (%) Output Load Current (%) 100100 100 7575 5050 2525 1010

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 13 of 22 www.murata.com EMC FILTERING AND SPECTRA FILTERING The following ﬁlter circuit and ﬁlter table shows the input ﬁlters typically required to meet EN55022 Quasi-PeakCurve B. DC DC Inductor Capacitor L1, μH SMD Through Hole C1, μF SMD Through Hole MGJ2D051505BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D051509BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D051515BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D051802BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D052003BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D052005BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D121503BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D121505BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D121509BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D121515BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D121802BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D121805BSC MGJ2D122003BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D122005BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D151505BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D151509BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D151515BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D151802BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D152003BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D152005BSC 10 84103C 13R103C 4.7 GRM21BC71E475KE11L RCER71H475K3K1H03B MGJ2D241503BSC 10 84103C 13R103C 4.7//4.7 GRM21BC71H475KE11L RCER71H475K3K1H03B MGJ2D241505BSC 10 84103C 13R103C 4.7//4.7 GRM21BC71H475KE11L RCER71H475K3K1H03B MGJ2D241509BSC 10 84103C 13R103C 4.7//4.7 GRM21BC71H475KE11L RCER71H475K3K1H03B MGJ2D241709BSC 10 84103C 13R103C 4.7//4.7 GRM21BC71H475KE11L RCER71H475K3K1H03B MGJ2D241802BSC 10 84103C 13R103C 4.7//4.7 GRM21BC71H475KE11L RCER71H475K3K1H03B MGJ2D241805BSC 10 84103C 13R103C 4.7//4.7 GRM21BC71H475KE11L RCER71H475K3K1H03B MGJ2D242003BSC 10 84103C 13R103C 4.7//4.7 GRM21BC71H475KE11L RCER71H475K3K1H03B MGJ2D242005BSC 10 84103C 13R103C 4.7//4.7 GRM21BC71H475KE11L RCER71H475K3K1H03B

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 14 of 22 www.murata.com EMC FILTERING AND SPECTRA (Continued) MGJ2D051505BSC (Quasi-Peak) MGJ2D051505BSC (Average) MGJ2D051509BSC (Quasi-Peak) MGJ2D051509BSC (Average) MGJ2D051515BSC (Quasi-Peak) MGJ2D051515BSC (Average) MGJ2D051802BSC (Quasi-Peak) MGJ2D051802BSC (Average)

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 15 of 22 www.murata.com EMC FILTERING AND SPECTRA (Continued) MGJ2D052003BSC (Quasi-Peak) MGJ2D052003BSC (Average) MGJ2D052005BSC (Quasi-Peak) MGJ2D052005BSC (Average) MGJ2D121503BSC (Quasi-Peak) MGJ2D121503BSC (Average) MGJ2D121505BSC (Quasi-Peak) MGJ2D121505BSC (Average)

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 16 of 22 www.murata.com EMC FILTERING AND SPECTRA (Continued) MGJ2D121509BSC (Quasi-Peak) MGJ2D121509BSC (Average) MGJ2D121515BSC (Quasi-Peak) MGJ2D121515BSC (Average) MGJ2D121802BSC (Quasi-Peak) MGJ2D121802BSC (Average) MGJ2D121805BSC (Quasi-Peak) MGJ2D121805BSC (Average)

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 17 of 22 www.murata.com EMC FILTERING AND SPECTRA (Continued) MGJ2D122003BSC (Quasi-Peak) MGJ2D122003BSC (Average) MGJ2D122005BSC (Quasi-Peak) MGJ2D122005BSC (Average) MGJ2D151505BSC (Quasi-Peak) MGJ2D151505BSC (Average) MGJ2D151509BSC (Quasi-Peak) MGJ2D151509BSC (Average)

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 18 of 22 www.murata.com EMC FILTERING AND SPECTRA (Continued) MGJ2D151515BSC (Quasi-Peak) MGJ2D151515BSC (Average) MGJ2D151802BSC (Quasi-Peak) MGJ2D151802BSC (Average) MGJ2D152003BSC (Quasi-Peak) MGJ2D152003BSC (Average) MGJ2D152005BSC (Quasi-Peak) MGJ2D152005BSC (Average)

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 19 of 22 www.murata.com EMC FILTERING AND SPECTRA (Continued) MGJ2D241503BSC (Quasi-Peak) MGJ2D241503BSC (Average) MGJ2D241505BSC (Quasi-Peak) MGJ2D241505BSC (Average) MGJ2D241509BSC (Quasi-Peak) MGJ2D241509BSC (Average) MGJ2D241709BSC (Quasi-Peak) MGJ2D241709BSC (Average)

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 20 of 22 www.murata.com EMC FILTERING AND SPECTRA (Continued) MGJ2D241802BSC (Quasi-Peak) MGJ2D241802BSC (Average) MGJ2D241805BSC (Quasi-Peak) MGJ2D241805BSC (Average) MGJ2D242003BSC (Quasi-Peak) MGJ2D242003BSC (Average) MGJ2D242005BSC (Quasi-Peak) MGJ2D242005BSC (Average) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz)

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 21 of 22 www.murata.com PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS PIN CONNECTIONS Tube outline dimensions RECOMMENDED FOOTPRINT DETAILS Weight: 4.3g Unless otherwise stated all dimensions in mm (inches). Pin Function 1+ V IN 2- V IN 5- V OUT 6O V 7+ V OUT

5.4kVDC Isolated 2W Gate Drive DC-DC Converters KDC_MGJ2B_B01 Page 22 of 22 www.murata.com Murata Power Solutions (Milton Keynes) Ltd. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Speciﬁcations are subject to change without notice. © 2023 Murata Power Solutions (Milton Keynes) Ltd. This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: https://www.murata.com/en-eu/products/power/requirements DISCLAIMER Unless otherwise stated in the datasheet, all products are designed for standard commercial and industrial applications and NOT for safety-critical and/or life-critical applications. Particularly for safety-critical and/or life-critical applications, i.e. applications that may directly endanger or cause the loss of life, inﬂict bodily harm and/or loss or severe damage to equipment/property, and severely harm the environment, a prior explicit written approval from Murata is strictly required. Any use of Murata standard prod- ucts for any safety-critical, life-critical or any related applications without any prior explicit written approval from Murata shall be deemed unauthorised use. These applications include but are not limited to:

Aircraft equipment
Aerospace equipment
Undersea equipment
Power plant control equipment
Medical equipment
Transportation equipment ( automobiles, trains, ships, etc.)
Trafﬁc signal equipment
Disaster prevention / crime prevention equipment
Data Processing equipment Murata makes no express or implied warranty, representation, or guarantee of suitability, ﬁtness for any particular use/purpose and/or compatibility with any applica- tion or device of the buyer, nor does Murata assume any liability whatsoever arising out of unauthorised use of any Murata product for the application of the buyer. The suitability, ﬁtness for any particular use/purpose and/or compatibility of Murata product with any application or device of the buyer remain to be the responsibility and liability of the buyer. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards that anticipate dangerous consequences of failures, moni- tor failures and their consequences, lessen the likelihood of failures that might cause harm, and take appropriate remedial actions. Buyer will fully indemnify and hold Murata, its afﬁliated companies, and its representatives harmless against any damages arising out of unauthorised use of any Murata products in any safety-critical and/ or life-critical applications. Remark: Murata in this section refers to Murata Manufacturing Company and its afﬁliated companies worldwide including, but not limited to, Murata Power Solutions.

Product Information

MGJ2D152003BSC specifications and overview.

Summary

5.4kVDC Isolated 2W Gate Drive DC-DC Converters 2023

Description

5.4kVDC Isolated 2W Gate Drive DC-DC Converters 2023

Source title MGJ2D152003BSC Datasheet(PDF) - Murata Power Solutions Inc.

Related Parts

More parts from the same family.

Browse manufacturer