MGJ1

MGJ1 MURATA-PS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 23

Technical content

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 1 of 23 www.murata-ps.com www.murata.com For full details go to www.murata-ps.com/rohs SELECTION GUIDE Or der Code1 Nominal Input Voltage Output Voltage 1 Output Voltage 2 Output Current 1 Output Current 2 Input Current at Rated Load Output 1 Output 2Load Regulation (Typ) Load Regulation (Max) Load Regulation (Typ) Load Regulation (Max) VVV m A % MGJ1D051505MPC 5 15 -5 50 50 320 7 8.1 0.3 0.5 MGJ1D051510MPC 5 15 -10 40 40 310 7.6 8.8 0 0.1 MGJ1D051905MPC 5 19 -5 42 42 320 6.2 7.4 0.2 0.3 MGJ1D121503MPC 12 15 -3 55 55 115 1 2 19 23 MGJ1D121505MPC 12 15 -5 50 50 115 5.6 6.6 0.3 0.4 MGJ1D121509MPC 12 15 -9 42 42 115 6.6 7.6 0 0.1 MGJ1D121905MPC 12 19 -5 42 42 115 5.1 6 0.2 0.3 MGJ1D151505MPC 15 15 -5 50 50 95 5 6 0.3 0.4 MGJ1D151509MPC 15 15 -9 42 42 95 6 7 0 0.1 MGJ1D151905MPC 15 19 -5 42 42 95 4.5 5.5 0.2 0.3 MGJ1D241505MPC 24 15 -5 50 50 65 3.8 5.2 0.2 0.3 MGJ1D241509MPC 24 15 -9 42 42 65 4.5 6 0 0.1 MGJ1D241905MPC 24 19 -5 42 42 65 3.4 4.5 0.2 0.3

FEATURES

„ Patent protected „Optimised bipolar output voltages for IGBT/ SiC & MOSFET gate drives „Reinforced insulation to UL60950 recognised6 „ ANSI/AAMI ES60601-1 2 MOPP recognised7 „ 5.7kVDC isolation test voltage ‘Hi Pot Test’ „Ultra low isolation capacitance „Surface mount package style „5V, 12V, 15V & 24V inputs outputs „Operation to 105oC „ Short circuit protection4 „ Thermal protection5 „Characterised partial discharge performance „Characterised CMTI >200kV/ȝS „Continuous barrier withstand voltage 3kVDC PRODUCT OVERVIEW The MGJ1 series of DC-DC converters is ideal for powering ‘high side’ and ‘low side’ gate drive circuits for IGBTs/SiC and MOSFETs in bridge circuits. A choice of asymmetric output voltages allows optimum drive levels for best system efficiency. The MGJ1 series is characterised for high isolation requirements commonly seen in bridge circuits used in motor drives and inverters, while the MGJ1 industrial grade temperature rating and construction gives long service life and reliability. SELECTION GUIDE (Continued) Order Code1 Ripple & Noise (Typ)3 Ripple & Noise (Max)3 Efficiency (Min) Efficiency (Typ) Isolation Capacitance MTTF2 mVp-p % pF MIL. Tel. kHrs MGJ1D051505MPC 15 30 60 63.5 3 1964 70733 MGJ1D051510MPC 14 30 60 64 3 1872 65924 MGJ1D051905MPC 14 30 61 64.5 3 1816 55135 MGJ1D121503MPC 12 25 68 72 4 1873 36377 MGJ1D121505MPC 10 20 67 71.5 3 2214 39194 MGJ1D121509MPC 10 20 68 73 3 2069 37971 MGJ1D121905MPC 10 20 67 72 3 1908 37172 MGJ1D151505MPC 8 20 61 69 3 1739 38525 MGJ1D151509MPC 8 20 61 69 3 1703 37378 MGJ1D151905MPC 8 20 61 69 3 1641 37025 MGJ1D241505MPC 15 30 57 64 3 1500 33052 MGJ1D241509MPC 15 30 57 64 3 1378 31761 MGJ1D241905MPC 15 30 58 64 3 1356 29139 1. Components are supplied in tape and reel packaging, please refer to package specification section. Orderable part numbers are MGJ1DXXXXXXMPC-R7 (80 pieces per reel), or MGJ1DXXXXXXMPC-R13 (400 pieces per reel). 2. Calculated using MIL-HDBK-217 FN2 and Telcordia SR-332 calculation model with nominal input voltage at full load. See ripple & noise test method. 4. Please refer to short circuit application notes. 5. Applicable for 12, 15 and 24 Vin types. 6. The MGJ1D121503MPC is pending recognition to UL62368-1. 7. The MGJ1D121503MPC is pending recognition to ANSI/AAMI ES60601-1 All specifications typical at T A=25°C, nominal input voltage and rated output current unless otherwise specified

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 2 of 23 www.murata.com INPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Voltage range Continuous operation, 5V input types 4.5 5 5.5 VContinuous operation, 12V input types 10.8 12 13.2 Continuous operation, 15V input types 13.5 15 16.5 Continuous operation, 24V input types 21.6 24 26.4 Input short circuit current ISC 5V input types 125 12/15V input types 55 24V input types 80 Input reflected ripple MGJ1D121503MPC 4.5 mA p-p 5V input types 7.5 12V input types 2 15V input types 3 24V input types 2.5 OUTPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Rated Power TA=-40ºC to 105ºC 1.0 W Voltage Set Point Accuracy See tolerance envelopes Line regulation 051505 High VIN to low VIN OP1 1.38 1.45 %/% High VIN to low VIN OP2 0.06 0.08 051510 High VIN to low VIN OP1 1.68 1.75 High VIN to low VIN OP2 0.01 0.01 051905 High VIN to low VIN OP1 1.32 1.40 High VIN to low VIN OP2 0.05 0.06 121503 High VIN to low VIN OP1 0.3 0.5 High VIN to low VIN OP2 5 6 121505 High VIN to low VIN OP1 1.56 1.62 High VIN to low VIN OP2 0.05 0.08 121509 High VIN to low VIN OP1 1.64 1.70 High VIN to low VIN OP2 0.01 0.01 121905 High VIN to low VIN OP1 1.29 1.32 High VIN to low VIN OP2 0.06 0.07 151505 High VIN to low VIN OP1 1.35 1.40 High VIN to low VIN OP2 0.07 0.08 151509 High VIN to low VIN OP1 1.64 1.75 High VIN to low VIN OP2 0.01 0.01 151905 High VIN to low VIN OP1 1.28 1.4 High VIN to low VIN OP2 0.06 0.07 241505 High VIN to low VIN OP1 1.34 1.40 High VIN to low VIN OP2 0.07 0.10 241509 High VIN to low VIN OP1 1.61 1.70 High VIN to low VIN OP2 0.01 0.01 241905 High VIN to low VIN OP1 1.26 1.32 High VIN to low VIN OP2 0.05 0.07

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 3 of 23 www.murata.com GENERAL CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Switching frequency MGJ1D121503MPC 105 kHz5V input types 90 12/15V input types 95 24V input types 115 TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Specification All output types (see derating curves) -40 105 Storage -55 125 Product Temperature above ambient 5V input types 23 12V input types 17 15V input types 19 24V input types 26 Cooling Free air convection ABSOLUTE MAXIMUM RATINGS Input voltage VIN, MGJ1D05 6V Input voltage VIN, MGJ1D12 15V Input voltage VIN, MGJ1D15 18V Input voltage VIN, MGJ1D24 28V ISOLATION CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Isolation test voltage Production tested for 3 second 5700 VDC Qualification tested for 1 minute 5700 VDC Resistance Viso= 1000VDC 1 GΩ Continuous barrier withstand voltage Non-safety barrier application 3000 VDC Safety standard UL60950-11 Reinforced Creepage and clearance 9mm 250 VrmsANSI/AAMI ES60601-12 2 MOPP 250 1. The MGJ1D121503MPC is pending recognition to UL62368-1. 2. The MGJ1D121503MPC is pending recognition to ANSI/AAMI ES60601-1.

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 4 of 23 www.murata.com TECHNICAL NOTES ISOLATION VOLTAGE ‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test voltage, applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation. Murata Power Solutions MGJ1 series of DC-DC converters are all 100% production tested at 5.7kVDC for 3 second and have been qualification tested at 5.7kVDC for 1 minute. The MGJ1 series is recognised by Underwriters Laboratory, please see safety approval section for more information. When the insulation in the MGJ1 series is not used as a safety barrier, i.e. provides functional isolation only, continuous or switched voltages across the barrier up to 3kV are sustainable. This is established by measuring the partial discharge Inception voltage in accordance with IEC 60270. Please contact Murata for further information. REPEATED HIGH-VOLTAGE ISOLATION TESTING It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials, construction and environment. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specified test voltage. SAFETY APPROVAL ANSI/AAMI ES60601-1 The MGJ1 series has been recognised by Underwriters Laboratory (UL) to ANSI/AAMI ES60601-1 and provides 2 MOPP (Means Of Patient Protection) based upon a working voltage of 250 Vrms max, between Primary and Secondary. The MGJ1D121503MPC is pending recognition to ANSI/AAMI ES60601-1. UL 60950 The MGJ1 series has been recognised by Underwriters Laboratory (UL) to UL 60950 for reinforced insulation to a working voltage of 250Vrms with a maximum mea- sured product operating temperature of 105°C. The MGJ1D121503MPC is pending recognition to UL62368-1. Creepage and clearance 9mm. FUSING The MGJ1 Series of converters are not internally fused so to meet the requirements of UL an anti-surge input line fuse should always be used with ratings as defined below. Input Voltage, 5V 600mA Input Voltage, 12V 250mA Input Voltage, 15V 200mA Input Voltage, 24V 125mA All fuses should be Anti-Surge and UL rated. RoHS COMPLIANCE, MSL, PSL AND REFLOW SOLDERING INFORMATION This series is compatible with Pb-Free soldering systems and is also backward compatible with Sn/Pb soldering systems. Please refer to application notes for further information. The MGJ1 series can be soldered in accordance with J-STD-020 and have a classification temperature of 260°C and moisture sensitivity level 2. The termination finish on this product is Gold with plating thickness 0.12 microns.

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 5 of 23 www.murata.com PART NUMBER STRUCTURE MGJ 1 D XX XXXX M P C -RXX Series name Power rating Output type S - Single D - Dual T - Triple Q - Quad RoHS compliant Package type S - SIP D - DIP M - Surface mount Z - ZIP Output voltage Input voltage Packaging code R7 - 7 inch reel R13 - 13 inch reel Short circuit protection CHARACTERISATION TEST METHODS Ripple & Noise Characterisation Method Ripple and noise measurements are performed with the following test configuration. C1 1μF X7R m ultilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC-DC converter C2 10μF tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC-DC converter with an ESR of less than 100mΩ at 100 kHz C3 100nF multilayer ceramic capacitor, general purpose R1 450Ω resistor, carbon film, ±1% tolerance R2 50Ω BNC termination T1 3T of the coax cable through a ferrite toroid RLOAD Resistive load to the maximum power rating of the DC-DC converter. Connections should be made via twisted wires Measured values are multiplied by 10 to obtain the specified values. Differential Mode Noise Test Schematic OSCILLOSCOPE Y INPUT SUPPLY C1 C2 C3 R1 T1 R2 Input Output DC/DC Converter R LOAD + + - - ENVIRONMENTAL VALIDATION TESTING The following tests have been conducted on this product series, please contact Murata if further information about the tests is required. Test Standard Condition Temperature cycling JEDEC JESD22-A104 1000 cycles in a dual zone chamber from -40 (+5/-10)°C to 105 (+10/-5)°C. 15mins dwell at each (inclusive of ramps). 2 cycles per hour Humidity bias JEDEC JESD22-A101 85±2°C, 85±5% R.H. for 1000 (+168/-24) hours Storage life JEDEC JESD22-A103, Condition A 125°C +10/-0°C for ≥1000 hours Vibration BS EN 61373 with respect to BS EN 60068-2-64, Test Fh Category

1 Class B

5 – 150Hz. Level at each axis – Vertical, Traverse and Longitudinal: 5.72m/s2 rms. 5 hours in each axis. Crest factor: 3 Sigma. Device is secured via the pads. Shock BS EN 61373: 2010 Category 1, Class B Test is 30ms duration, 3 shocks in each sense of 3 mutually perpendicular axes (18 shocks total). Level at each axis: Vertical, Traverse and Longitudinal: 50m/s2. Device is secured via the pads. Solvent cleaning Resistance to cleaning agents. Solvent – Novec 71IPA & Topklean EL-20A. Pulsed ultrasonic immersion 45°C- 65°C Solvent resistance MIL-STD-883 Method 2015 The parts and the bristle portion of the brush are immersed in Isopropanol for a minimum of 1 minute. The parts are brushed 3 times, after the third time the parts are blown dry and inspected.

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 6 of 23 www.murata.com APPLICATION NOTES Minimum load The minimum load to meet datasheet specification is 10% of the full rated load across the specified input voltage range. Lower than 10% minimum loading will result in an increase in output voltage, which may rise to typically 1.25 times the specified output voltage if the output load falls to less than 5%. Gate Drive Applications Advisory Note For general guidance for product usage in gate drive applications please refer to “gate drive application notes”. Capacitive loading and start up Typical start up times for this series, with a typical input voltage rise time of 2.2μs and output capacitance of 10μF, are shown in the table below. The product series will start into capacitance ranging up to 47μF (Capacitor across +V to -V or 100μF across each output) with increased start times. Short Circuit Performance Start-up time ms MGJ1D051505MPC 4.2 MGJ1D051510MPC 5 MGJ1D051905MPC 5.2 MGJ1D121503MPC 2.5 MGJ1D121505MPC 2.8 MGJ1D121509MPC 3.9 MGJ1D121905MPC 4 MGJ1D151505MPC 3 MGJ1D151509MPC 6 MGJ1D151905MPC 5 MGJ1D241505MPC 1 MGJ1D241509MPC 1.3 MGJ1D241905MPC 1.3 Typical Start-Up Wave Form The MGJ1D05XXXXMPC offers short circuit protection at low ambient temperatures from -40°C to the temperatures shown in the below graph. All other variants in the MGJ1 series offer continuous short circuit protection. 100 1000 25 35 45 55 65 75 85 Time (seconds) dĞŵƉĞƌĂƚƵƌĞ;ȗͿ 5.5V

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 7 of 23 www.murata.com APPLICATION NOTES (Continued) Optional Configuration: The MGJ1 series is a dual output DC-DC specifically designed for gate drive applications and its output configuration is not suitable for application usage as a general dual output DC-DC converter. However the MGJ1 series can be used as a general purpose single output converter, by loading from +Vout to -Vout. The MGJ1 series provides a dual output by using a zener voltage divider network, the negative output is obtained by using a zener diode as a voltage regulator. If a short circuit occurs, the zener diode is protected. A 5V1 zener diode is used to set the -5 Vout, a 9V1 zener diode to set the -9Vout and a 10V zener diode to set the -10Vout. A tolerance of 2% should be taken into consideration for the zener diodes. The 5V1 zener diode is rated at 300mW, the 9V1 and 10V zener diodes are rated at 400mW. For optional configuration where alternative negative output voltages are required, an external zener diode network can be connected across the main 20V or 24V output. However this zener diode will no longer be protected from short circuits as the internal short circuit protection is bypassed. OSCILLATOR Protection +VIN NC NA -VIN +VOUT -VOUT -VOUT Protection External Zener Diode Network Circuit Option 1 +VOUT -VOUT -VOUT Protection External Zener Diode Network Circuit Option 2 +VOUT -VOUT -VOUT

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 8 of 23 www.murata.com APPLICATION NOTES (Continued) Schematic for driving IGBT, SiC & MOSFET IGBT MGJ1DXX1509MPC MGJ1D051510MPC OPTOCOUPLER -9V/-10V +15V NA +Vin -Vin NC PWM DRIVE IGBT MGJ1 DC-DC CONNECTIONS FOR DRIVING IGBT DEVICES MGJ1 DC-DC CONNECTIONS FOR DRIVING SiC DEVICES +19V SiC PWM DRIVE -5V -Vin +Vin OPTOCOUPLER MGJ1DXX1905MPC SiC NA NC PWM DRIVE MOSFET MOSFET MGJ1DXX1505MPC MGJ1 DC-DC CONNECTIONS FOR DRIVING MOSFET DEVICES +15V -5V-Vin +Vin OPTOCOUPLER NA NC

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 9 of 23 www.murata.com POSITIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES The voltage tolerance envelopes show typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to changes in output loading and set point accuracy. 051505 051510 051905 121503 121505, 121509, 121905 151505, 151509, 151905 11% 6% -3% -4% Output Load Current (%) Output Load Current (%) Output Load Current (%) Output Load Current (%)Output Load Current (%) Output Load Current (%) 100 100 100 100100 10075 75 75 7575 7550 50 50 5050 5025 25 25 2525 25 10 10 10 10 10 Output Voltage Output Voltage Output Voltage Output VoltageOutput Voltage Output Voltage 12% -1% -3% -1% -6% -5%

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 10 of 23 www.murata.com POSITIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES (Continued) The voltage tolerance envelopes show typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to changes in output loading and set point accuracy. 241505, 241509 241905 Output Load Current (%) 100755025 10 Output Voltage -3% 2% 3% -3% Output Load Current (%) 100755025 10 Output Voltage

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 11 of 23 www.murata.com NEGATIVE OUTPUT VOLTAGE TOLERANCE ENVELOPES 051505, 121905, 241905 051510, 121509, 241509 051905 121505, 241505 151505, 151509, 151905 121503 Output Voltage Output Voltage Output Voltage Output Voltage Output Voltage Output Voltage Output Load Current (%) Output Load Current (%) Output Load Current (%) Output Load Current (%) Output Load Current (%) Output Load Current (%) 100 100 100 100 100 10075 7550 5025 25 10 -6% -6% -3% -3% 19% -7% -18% -7% -36% -4% -5% -5% -5%

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 12 of 23 www.murata.com EFFICIENCY VS LOAD MGJ1D051505MPC MGJ1D051510MPC MGJ1D051905MPC MGJ1D121503MPC MGJ1D121505MPC MGJ1D121509MPC 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%)

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 13 of 23 www.murata.com EFFICIENCY VS LOAD MGJ1D121905MPC MGJ1D151505MPC MGJ1D151509MPC MGJ1D151905MPC MGJ1D241505MPC MGJ1D241509MPC 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%)

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 14 of 23 www.murata.com EFFICIENCY VS LOAD (Continued) MGJ1D241905MPC 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Efficiency (%) Load (%)

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 15 of 23 www.murata.com TEMPERATURE DERATING MGJ1D051505MPC MGJ1D051510MPC MGJ1D051905MPC MGJ1D121503MPC MGJ1D121505MPC MGJ1D121509MPC 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) Temperature (°Ϳ VIN = 5V VIN = 5.5V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) Temperature (°Ϳ VIN = 12V VIN = 13.2V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) Temperature (°Ϳ VIN = 5V VIN = 5.5V 100 70 75 80 85 90 95 100 105 110 Loa d (%) Temperature (°C) Vin = 12 Vin = 13.2 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) Temperature (°Ϳ VIN = 12V VIN = 13.2V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) Temperature (°Ϳ VIN = 5V VIN = 5.5V

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 16 of 23 www.murata.com TEMPERATURE DERATING MGJ1D121905MPC MGJ1D151505MPC MGJ1D151509MPC MGJ1D151905MPC MGJ1D241505MPC MGJ1D241509MPC 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) Temperature (°Ϳ VIN = 12V VIN = 13.2V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) T emperature (°Ϳ VIN = 15V VIN = 16.5V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) T emperature (°Ϳ VIN = 15V VIN = 16.5V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) T emperature (°Ϳ VIN = 15V VIN = 16.5V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) Temperature (°Ϳ VIN = 24V VIN = 26.4V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) Temperature (°Ϳ VIN = 24V VIN = 26.4V

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 17 of 23 www.murata.com TEMPERATURE DERATING (Continued) MGJ1D241905MPC 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 70 75 80 85 90 95 100 105 Load (%) Temperature (°Ϳ VIN = 24V VIN = 26.4V

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 18 of 23 www.murata.com EMC FILTERING AND SPECTRA FILTERING An input capacitor and inductor is required to meet EN 55022 Curve B, Quasi-Peak EMC limit, as shown in the following plots. The following plots show positive and negative quasi peak and CISPR22 Average Limit B (green line) and Quasi Peak Limit B (pink line) adherence limits. Filter suitability should be evaluated in application. If a high dv/dt above 80kV/us is expected from output to input it is advised that a common mode filter is used on the input without Y capacitors. This will reduce the common mode current and reduce interference with primary side circuits. MGJ1D051505MPC MGJ1D051510MPC MGJ1D051905MPC MGJ1D121503MPC DC DC L C LoadPower Source 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) Inductor Capacitor L, μH SMD Through Hole C, μF MGJ1D051505MPC 15 46153C 13R153C 10 MGJ1D051510MPC 15 46153C 13R153C 10 MGJ1D051905MPC 15 46153C 13R153C 10 MGJ1D121503MPC 10 82103C 11R103C 15 MGJ1D121505MPC 10 46103C 13R103C 10 MGJ1D121509MPC 10 46103C 13R103C 10 MGJ1D121905MPC 10 46103C 13R103C 10 Inductor Capacitor L, μH SMD Through Hole C, μF MGJ1D151505MPC 10 46103C 13R103C 10 MGJ1D151509MPC 10 46103C 13R103C 10 MGJ1D151905MPC 10 46103C 13R103C 10 MGJ1D241505MPC 10 46103C 13R103C 10 MGJ1D241509MPC 10 46103C 13R103C 10 MGJ1D241905MPC 10 46103C 13R103C 10

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 19 of 23 www.murata.com EMC FILTERING AND SPECTRA (Continued) MGJ1D121505MPC MGJ1D121509MPC MGJ1D121905MPC MGJ1D151505MPC MGJ1D151509MPC MGJ1D151905MPC 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz)

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 20 of 23 www.murata.com EMC FILTERING AND SPECTRA (Continued) MGJ1D241505MPC MGJ1D241509MPC MGJ1D241905MPC 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz) 1.00E+05 1.00E+06 1.00E+07 1.00E+08 dBuV Frequency (Hz)

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 21 of 23 www.murata.com PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS PIN CONNECTIONS Pin Function 1 -Vin 2N A 3 -Vout 4 -Vout 5 +Vout 60 V 7N C 8 +Vin RECOMMENDED FOOTPRINT DETAILS x8 PLACES 1.45 [0.057] 10.92 [0.430] 1.08 [0.042] x 8 PLACES 0.61 [0.024] 2.54 [0.100] 14.99 [0.590] SMA PICKUP POINT (TOP OF PCB) 0.1 (0.004) S x8 PINS S 19.94 [0.785] 2.54 [0.100] 87 65 SEATING PLANE All dimensions in mm (inches), Controlling dimension is mm. Tolerance (unless otherwise stated) ±0.20 (0.008). Components shown for reference only. Weight: 2.3g 2.54 [0.100] 10.92 [0.430] x8 PLACES 2.30 [0.091] x8 PLACES 1.00 [0.039] 13.97 [0.550]RECOMMENDED ISOLATION BARRIER 2.54 [0.100] NA - Not Available for electrical connection.

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 22 of 23 www.murata.com TAPE & REEL SPECIFICATIONS REEL OUTLINE DIMENSIONS REEL PACKAGING DETAILS TAPE OUTLINE DIMENSIONS 20.5 [0.524]# 6.1 [0.240] 15.5 [0.610]# DIRECTION OF UNREELING 14.2 [0.559] 4.0 [0.157] 24.0 [0.945] COVER TAPE 32.0 [1.260] 28.4 [1.118] Product Orientation Pin 1, located nearest to carrier drive sprocket. Reel Quantity: 7” - 80 or 13” - 400 38.4 [1.512] MAX # Ø13.5 12.8 [Ø 0.531 0.504 ] 1.5 [0.059] MIN ## Ø20.2 [Ø0.795] MIN Ø330 [13.000] OR Ø178 [7.000] 100 [3.937] MIN LEADER SECTION 400 [15.748] MIN GOODS ENCLOSURE SECTION TRAILER SECTION 160 [6.299] MIN Tape & Reel specifications shall conform with current EIA-481 standard Unless otherwise stated all dimensions in mm(inches) Controlling dimension is mm # Measured at hub ## Six equi-spaced slots on 180mm/7” reel Tape & Reel specifications shall conform with current EIA-481 standard Unless otherwise stated all dimensions in mm(inches) Controlling dimension is mm Components shall be orientated within the carrier tape as indicated # Measured on a plane 0.3mm above the bottom pocket

5.7kVDC Isolated 1W SM Gate Drive DC-DC Converters KDC_MGJ1_E01 Page 23 of 23 www.murata.com Murata Power Solutions (Milton Keynes) Ltd. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2021 Murata Power Solutions (Milton Keynes) Ltd. This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: https://www.murata.com/en-eu/products/power/requirements DISCLAIMER Unless otherwise stated in the datasheet, all products are designed for standard commercial and industrial applications and NOT for safety-critical and/or life-critical applications. Particularly for safety-critical and/or life-critical applications, i.e. applications that may directly endanger or cause the loss of life, inflict bodily harm and/or loss or severe damage to equipment/property, and severely harm the environment, a prior explicit written approval from Murata is strictly required. Any use of Murata standard prod- ucts for any safety-critical, life-critical or any related applications without any prior explicit written approval from Murata shall be deemed unauthorised use. These applications include but are not limited to:

• Aircraft equipment
• Aerospace equipment
• Undersea equipment
• Power plant control equipment
• Medical equipment
• Transportation equipment ( automobiles, trains, ships, etc.)
• Traffic signal equipment
• Disaster prevention / crime prevention equipment
• Data Processing equipment Murata makes no express or implied warranty, representation, or guarantee of suitability, fitness for any particular use/purpose and/or compatibility with any applica- tion or device of the buyer, nor does Murata assume any liability whatsoever arising out of unauthorised use of any Murata product for the application of the buyer. The suitability, fitness for any particular use/purpose and/or compatibility of Murata product with any application or device of the buyer remain to be the responsibility and liability of the buyer. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards that anticipate dangerous consequences of failures, moni- tor failures and their consequences, lessen the likelihood of failures that might cause harm, and take appropriate remedial actions. Buyer will fully indemnify and hold Murata, its affiliated companies, and its representatives harmless against any damages arising out of unauthorised use of any Murata products in any safety-critical and/ or life-critical applications. Remark: Murata in this section refers to Murata Manufacturing Company and its affiliated companies worldwide including, but not limited to, Murata Power Solutions.