MGH2815DZ/ES

MGH2805S INTERPOINT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Shown with “Gull Wing” lead option, also available with straight leads. See Section B8, case B, for dimensions and options. Weight: 12 grams maximum Screening: Standard, ES, or 883 (Class H). See Section C2 for screening options, see Section A5 for ordering information. SINGLE DUAL ±12 ±15DESCRIPTION The MGH Series™ of DC/DC converters delivers 1.5 watts of output power in a labor saving surface mount package. The wide input voltage range of 12 to 50 VDC accepts the varying voltages of mili- tary, aerospace, or space applications. Single output converters feature outputs of 5, 12, or 15 volts while dual output models feature outputs of ±5, ±12, or ±15 volts. Transient protection of 80 volts for up to 120 milliseconds exceeds the requirements of MIL-STD-704A for the 5 and 12 volt single and dual models. The 15 volt single and dual converters will withstand transients of up to 70 volts for up to 120 milliseconds. C ONVERTER D ESIGN MGH Series DC/DC converters incorporate a continuous flyback topology with a constant switching frequency of approximately 370 kHz. Output voltage regulation is accomplished on the primary side using current-mode pulse width modulation (PWM). Regulation is affected by the output load; refer to the specifications tables for more information. For dual output models, up to 80% of the total load may be on one output providing the other output carries a minimum of 20% of the total load. The dual models can be used at double the output voltage by connecting the load between positive and negative outputs, leaving the common unconnected. As an example the MGH2805D (5 volt dual output) can be used as a 10 VDC output. INHIBIT FUNCTION When an open collector TTL logic low is applied to the inhibit terminal, pin 18, the converter shuts down and lowers the output voltage to near zero and input current to as low 2.3 mA. Leaving the terminal open or applying an open collector TTL logic high will enable the converter. PROTECTION FEATURES Undervoltage lockout prevents the MGH Series converters from operating below approximately 8 VDC input voltage to keep system current levels smooth, especially during initialization or re-start oper- ations. All models include a soft-start function to prevent large current draw and minimize overshoot. The MGH Series of converters also provide short circuit protection by limiting the current to approximately 125% of full load. MIL-STD-461 Use Interpoint’s FMGA-461 EMI filter to pass the CE03 require- ments of MIL-STD-461C. SURFACE M OUNT PACKAGE MGH DC/DC converters can be surface mounted with pick-and- place equipment or manually. It is recommended that the case be attached with flexible epoxy adhesive or silicone which is thermally conductive (>1 watt /meter/°K). Internal components are soldered with SN96 (melting temperature 221°C) to prevent damage during reflow. Maximum reflow tempera- ture for surface mounting the MGH converter is 220°C for a maximum of 30 seconds. SN60, 62, or 63 are the recommended types of solder. Hand soldering should not exceed 300°C for 10 seconds per pin. The hermetically sealed metal cases are available in two different lead configurations. See Section B8, case B. DC/DC C ONVERTERS

28 VOLT INPUT

1.5 W ATT

FEATURES

• –55° to +125°C operation
• 12 to 50 VDC input
• Fully Isolated
• Magnetic feedback
• Fixed frequency 370 kHz typical
• Topology – Current Mode Flyback
• 80 V for up to 120 ms transient protection (70 V for 15 V single and dual models)
• Inhibit function
• Indefinite short circuit protection
• Up to 79% efficiency

RECOMMENDED OPERATING CONDITIONS ABSOLUTE MAXIMUM RATINGS INHIBIT Input Voltage

• 12 to 50 V Output Power
• 1.5 watts Capacitive Load
• 200 µF single output models
• 100 µF each output, dual output models Lead Soldering Temperature
• Reflow 220°C 30 sec. max SN60, 62 or 63 recommended solder
• Hand solder 300°C 10 sec. max per lead Storage Temperature Range (Case)
• –65°C to +150°C B2-94 MGH SERIES

Output Voltage Temperature Coefficient

• 100 ppm/°C typical Input to Output Capacitance
• 100 to 170 pF typical Undervoltage Lockout
• 8 V input typical Current Limit
• 125% of full load typical Isolation
• 100 megohm minimum at 500 V Conversion Frequency (kHz)
• 25°C 300 min, 370 typ, 450 max
• –55°C to +125°C 270 min, 370 typ, 470 max Inhibit Pin Voltage (unit enabled)
• 7 to 12 V Input Voltage Range
• 12 to 50 VDC continuous
• 80 V for 120 msec transient (70 V for 15 V single and dual models) Case Operating Temperature (Tc)
• –55°C to +125°C full power
• –55°C to +135°C absolute Derating Output Power/Current
• Linearly from 100% at 125C° to 0% at 135 C Electrical Characteristics: 25°C Tc, 28 VDC Vin, 100% load, unless otherwise specified. Inhibit: TTL Open Collector
• Logic low (output disabled) Logic low voltage ≤0.8 V Inhibit pin current 1 mA max
• Referenced to input common
• Logic high (output enabled) open collector SINGLE OUTPUT MODELS MGH2805S MGH2812S MGH2815S PARAMETER CONDITIONS MIN TYP MAX MIN TYP MAX MIN TYP MAX UNITS OUTPUT CURRENT V IN = 12 to 50 VDC 0 — 300 0 — 125 0 — 100 mA OUTPUT POWER V IN = 12 to 50 VDC 0 — 1.5 0 — 1.5 0 — 1.5 W OUTPUT RIPPLE 10 kHz - 2 MHz — 45 150 — 50 200 — 35 150 mV p-pVOLTAGE Tc = –55°C TO +125°C — 65 300 — 70 300 — 50 250 LINE REGULATION VIN = 12 to 50 VDC — 35 100 — 60 200 — 70 300 mVTc = –55°C TO +125°C — 40 120 — 70 250 — 80 350 LOAD REGULATION 10% TO FULL LOAD — 350 700 — 600 1300 — 700 1500 Tc = –55°C TO +125°C — 380 800 — 640 1400 — 760 1600 50% TO FULL LOAD — 100 200 — 145 300 — 165 350 mV Tc = –55°C TO +125°C — 115 300 — 160 400 — 185 450 INPUT VOLTAGE CONTINUOUS 12 28 50 12 28 50 12 28 50 VDC NO LOAD TO FULL TRANSIENT 120 ms 0 — 80 0 — 80 0 — 70 V INPUT CURRENT NO LOAD — 5.5 10 — 6.0 10 — 6.0 11 Tc = –55°C TO +125°C — 6.0 11 — 6.5 12 — 6.5 12 FULL LOAD — 70 74 — 68 72 — 68 72 mATc = –55°C TO +125°C — 73 78 — 70 74 — 70 74 INPUT RIPPLE 10k Hz - 10 MHz — 100 200 — 100 200 — 100 200 mA p-pCURRENT 2 Tc = –55°C TO +125°C — 130 250 — 150 250 — 150 250 EFFICIENCY Tc = 25°C 72 77 — 74 79 — 74 79 — %Tc = –55°C TO +125°C 69 75 — 72 77 — 72 77 — STEP LOAD TRANSIENT –400 185 400 –700 350 700 –700 350 700 mV pkRESPONSE 5 Tc = –55°C TO +125°C –500 185 500 –800 380 800 –800 380 800 50 %–100%– 50% RECOVERY — 125 500 — 130 500 — 140 600 µsTc = –55°C TO +125°C — 125 600 — 130 600 — 180 750 STEP LINE TRANSIENT –400 170 400 –900 400 900 –750 400 750 mV pkRESPONSE 5 Tc = –55°C TO +125°C –500 180 500 –1000 400 1000 –850 450 850 START-UP DELAY — 7 20 — 7 20 — 7 20 ms0 TO 28 VDC Tc = –55°C TO +125°C — 10 40 — 10 40 — 10 40 OVERSHOOT — 0 100 — 0 250 — 0 300 mV pkTc = –55°C TO +1 25°C — 0 150 — 0 350 — 0 450 Notes 1. Specified at 50% of full load. 2. Lin = 2 µH 3. Max. duration of short circuit: 25°C– 90 seconds; 125°C – 30 seconds. 4. Load fault is a short circuit (<50 mohms). Recovery into resistive full load. 5. Input step transition ‡ 10 µs.Recovery is time to settle to within 1% of Vout final value.

DUAL OUTPUT MODELS MGH2805D MGH2812D MGH2815D PARAMETER CONDITIONS MIN TYP MAX MIN TYP MAX MIN TYP MAX UNITS OUTPUT CURRENT 2 VIN = 12 to 50 VDC 0 ±150 240 0 ±62.5 100 0 ±50 80 mA OUTPUT POWER V IN = 12 to 50 VDC 0 — 1.5 0 — 1.5 0 — 1.5 W OUTPUT RIPPLE 10 kHz - 2 MHz — 35 150 — 35 150 — 30 150 VOLTAGE +VOUT Tc = –55°C TO +125°C — 50 250 — 40 250 — 35 250 mV p-p –VOUT 10 kHz - 2 MHz — 35 150 — 35 150 — 30 150 Tc = –55°C TO +125°C — 50 250 — 40 250 — 35 250 LINE REGULATION 3 VIN = 12 to 50 VDC — 10 50 — 100 300 — 165 500 V Tc = –55°C TO +125°C — 20 100 — 110 400 — 180 650 LOAD REGULATION 3, 4 10% TO FULL LOAD — 300 600 — 550 1100 — 600 1300 –55°C TO +125°C — 350 700 — 570 1200 — 630 1400 mV50% TO FULL LOAD — 80 200 — 115 250 — 125 300 –55°C TO +125°C — 100 300 — 130 350 — 135 400 CROSS REGULATION 5 –VOUT — — 400 — — 500 — — 500 mV INPUT VOLTAGE CONTINUOUS 12 28 50 12 28 50 12 28 50 VDC NO LOAD TO FULL TRANSIENT 120 ms 0 — 80 0 — 80 0 — 70 V INPUT CURRENT NO LOAD — 5.0 10 — 7.5 13 — 7.5 13 Tc = –55°C TO +125°C — 6.0 12 — 8.0 14 — 8.0 14 FULL LOAD — 69 73 — 70 73 — 71 74 mATc = –55°C TO +125°C — 72 77 — 71 77 — 72 78 INPUT RIPPLE 6 10 kHz - 10 MHz — 100 200 — 115 200 — 90 200 mA p-pCURRENT Tc = –55°C TO +125°C — 130 250 — 150 250 — 120 250 EFFICIENCY Tc = 25°C 73 77 — 73 77 — 72 76 — %Tc = –55°C TO +125°C 70 75 — 70 75 — 69 74 — STEP LOAD TRANSIENT –300 130 300 –600 250 600 –600 250 600 mV pkRESPONSE 9 Tc = –55°C TO +125°C –400 140 400 –700 260 700 –700 270 700 ±V out RECOVERY — 100 400 — 165 700 — 50 200 µs50 %–100%– 50% –55°C TO +125°C — 100 500 — 165 800 — 50 300 STEP LINE TRANSIENT –250 125 250 –500 240 500 –500 220 500 mV pkRESPONSE 19 Tc = –55°C TO +125°C –300 130 300 –600 250 600 –600 230 600 START–UP DELAY — 8 25 — 8 25 — 8 25 ms0 TO 28 VDC, ± Vout Tc = –55°C TO +125°C — 10 45 — 10 45 — 10 45 OVERSHOOT — 0 100 — 0 250 — 0 750 mV pkTc = –55°C TO +125°C — 0 150 — 0 350 — 0 900 Electrical Characteristics: 25°C Tc, 28 VDC Vin, 100% load, unless otherwise specified. Notes: 1. Specified at 50% load. 2. Max. spec indicates 80% of the converter’s total available power. This 80% is available from either output. 3. Specification applies to both + and –Vout. 4. Although no minimum load is required, at no load the output voltage may increase up to 15%. 5. Cross regulation is specified as the effect on –Vout for the following percent- ages of total output power: +Po = 20% and –Po = 80% to +Po=80% and –Po=20% 6. Lin = 2 µH. 7. Max. duration of short circuit: 25°C – 90 seconds; 125°C – 30 seconds. 8. Load fault is a short circuit (<50 mohms). Recovery into resistive full load. 9. Input step transition ‡ 10 µs.Recovery is time to settle to within 1% of Vout final value.

+V in +V out Case Ground MGH 28 12 S Z / ES Base Model Input Voltage Output Voltage Screening Number of Outputs (S = single, D = dual) Gull Wing Lead Option (Straight leaded case has no designator in this position.) (Standard screening has no designator in this position.) B2-96 MGH SERIES FIGURE 1: BLOCK D IAGRAM Pin Single Output Dual Output

1 Positive Input Positive Input

2 No connection No connection

3 Input Common Input Common

4, 5 Positive Output Positive Output 6, 7 Case Ground Case Ground 8, 9 Output Common Output Common 10, 11 Case Ground Case Ground

12 No connection No connection

13, 14 No connection Negative Output 15, 16, 17 No connection No connection

18 Inhibit Inhibit

To meet specified performance, all pins must be connected except “No Connection” pins. FIGURE 2: PIN O UT STANDARD M ICROCIRCUIT D RAWING (SMD) 5962-9569601HXC 5962-9569701HXC 5962-9569801HXC 5962-9570201HXC 5962-9570301HXC 5962-9570401HXC MGH S ERIES SIMILAR PART MGH2805S/883 MGH2812S/883 MGH2815S/883 MGH2805D/883 MGH2812D/883 MGH2815D/883 TOP VIEW MGH Differently colored glass bead around pin one or dimple in header (bottom or side of case) indicates pin one. Cover marking is oriented with pin one at the upper right corner. For exact specifications for an SMD product, refer to the SMD drawing.Call your Interpoint representative for status on the MGH SMD releases. See Section A3, SMDs, for more infor- mation. See Section B8, case B, for dimensions and “gull-wing” option.

Typical Performance Curves: 25°C Tc , 28 VDC Vin, 100% load, unless otherwise specified. EFFICIENCY OUTPUT POWER ALL 5 VOLT MODELS

12 VOLT

28 VOLT

EFFICIENCY vs LINE & LOAD

50 VOLT

1.75 FIGURE 3 1.75 EFFICIENCY OUTPUT POWER 12 & 15 V SINGLES EFFICIENCY vs LINE & LOAD FIGURE 4 1.75 EFFICIENCY OUTPUT POWER 12 & 15 V DUAL MODELS EFFICIENCY vs LINE & LOAD FIGURE 5 FIGURE 9 FIGURE 11 2V/div. Vin 20V/div. Vout TURN-ON INTO FULL LOAD 02 4 6 81 0 12 14 16 18 TIME (ms) MGH2805S Representative of all 5 volt models LOAD TRANSIENT RESPONSE 200 mV / div. 500 s / div. MGH2815D +VOUT FULL LOAD TO HALF LOAD +VOUT HALF LOAD TO FULL LOAD –VOUT FULL LOAD TO HALF LOAD –VOUT HALF LOAD TO FULL LOAD 100 ATTENUATION (dB) AUDIO REJECTION 10 60 FREQUENCY (kHz) MGH2815S - Representative of all models FIGURE 6 Vin LINE TRANSIENT RESPONSE 100 mV / div. 200 s / div. 20 V / div. Vout MGH2805S

12 VDC

50 VDC

200 mV / div. 200 s / div. 20 V / div. +Vout MGH2815D –Vout 100 mV / div. 500 s / div. MGH2805S HALF LOAD TO FULL LOAD FULL LOAD TO HALF LOAD

Typical Performance Curves: 25°C Tc , 28 VDC Vin, 100% load, unless otherwise specified. 5V/div. Vin 20V/div. –Vout TURN-ON INTO FULL LOAD 05 1 0 15 20 25 30 35 40 45 TIME (ms) MGH2815D Also representative of MGH2812S & D and MGH2815S +V out

0 V for –Vout

0 V for +Vout

–12 –15 –Vout VOLTAGE CHANGE (%) 90/10 70/30 50/50 30/70 10/90 OUTPUT LOAD (%) DUAL CROSS REGULATION 90% TO 10% LOAD ON +V 10% TO 90% LOAD ON –V +12 +15 FIGURE 13 FIGURE 14 –Vout VOLTAGE CHANGE (%) 10 30 40 50 OUTPUT LOAD (%) DUAL –12 –15 CROSS REGULATION 50% LOAD +V; 50% TO 10% LOAD –V AND 50% LOAD –V; 50% TO 10% LOAD +V SAFE OPERATING AREA 120 100

0 Vout NOMINAL %

% OF FULL LOAD OUTPUT VOLTAGE vs. OUTPUT LOAD 0 20 40 60 80 100 120 140 160 TRIP POINT 125% FIGURE 15 22622-001-DTS Rev A DQ# 1033 All technical information is believed to be accurate, but no responsibility is assumed for errors or omissions. Interpoint reserves the right to make changes in products or specifications without notice. MGH Series is a trademark of Interpoint. Copyright © 1998 - 1999 Interpoint. All rights reserved.

TEST (125°C Products) STANDARD /ES /883 (Class H)* PRE-CAP INSPECTION Method 2017, 2032 yes yes yes TEMPERATURE CYCLE (10 times) Method 1010, Cond. C, -65°C to 150°C no no yes Method 1010, Cond. B, -55°C to 125°C no yes no CONSTANT ACCELERATION Method 2001, 3000 g no no yes Method 2001, 500 g no yes no BURN-IN Method 1015, 160 hours at 125°C no no yes 96 hours at 125°C case (typical) no yes no FINAL ELECTRICAL TEST MIL-PRF-38534, Group A Subgroups 1 through 6: -55°C, +25°C, +125°C no no yes Subgroups 1 and 4: +25°C case yes yes no HERMETICITY TESTING Fine Leak, Method 1014, Cond. A no yes yes Gross Leak, Method 1014, Cond. C no yes yes Gross Leak, Dip (1 x 10-3) yes no no FINAL VISUAL INSPECTION Method 2009 yes yes yes Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534. *883 products are built with element evaluated components and are 100% tested and guaranteed over the full military temperature range of –55°C to +125°C. MOR Series MFLHP Series MFL Series MHP Series MTR Series MQO Series MHD Series MHV Series MHF+ Series MHF Series MGA Series MSA Series MGH Series MCH Series FM-704A EMI Filter FMD/FME EMI Filter FMC EMI Filter FMH EMI Filter FMGA EMI Filter FMSA EMI Filter HUM Modules LCM Modules LIM Modules QA SCREENING 125°C PRODUCTS 125°C PRODUCTS Applies to the following products MFLHP Series, MQO Series, MHF Series, FMD EMI Filters, Hum Modules, and LCM Modules do not offer ‘883” screening.