FGF65A3H SANKEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

Features

  • Low Saturation Voltage
  • High Speed Switching
  • With Integrated Fast Recovery Diode
  • RoHS Compliant

Applications

  • Welding Converters
  • PFC Circuit Package TO247-3L TO3P-3L TO3PF-3L (2)(4) (3) (1) (1) Gate (2) Collector (3) Emitter (4) Collector Not to scale Selection Guide Part Number Package KGF65A3H TO247-3L MGF65A3H TO3P-3L FGF65A3H TO3PF-3L 余白上 35mm (4) (4) (1) (2) (3)

KGF65A3H, MGF65A3H, FGF65A3H xGF65A3H-DSE Rev.1.3 SANKEN ELCTRIC CO., LTD. 2 Oct. 12, 2016 http://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 Absolute Maximum Ratings Unless otherwise specified, TA = 25 °C Parameter Symbol Conditions Rating Unit Remarks Collector to Emitter Voltage VCE 650 V Gate to Emitter Voltage VGE ±30 V Continuous Collector Current (1) IC TC = 25 °C 50 A TC = 100 °C 30 A Pulsed Collector Current IC(PULSE) PW ≤ 1 ms, duty cycle ≤ 1% 90 A Diode Continuous Forward Current (1) IF TC = 25 °C 40(2) A TC = 100 °C 30 A Diode Pulsed Forward Current IF(PULSE) PW ≤ 1 ms, duty cycle ≤ 1% 90 A Short Circuit Withstand Time tSC VGE = 15 V, VCE = 400 V TJ = 175 °C 10 μs Power Dissipation PD TC = 25 °C 217 W MGF65A3H KGF65A3H

72 FGF65A3H

Operating Junction Temperature TJ 175 °C Storage Temperature Range TSTG −55 to 150 °C Thermal Characteristics Unless otherwise specified, TA = 25 °C Parameter Symbol Conditions Min. Typ. Max. Unit Remarks Thermal Resistance of IGBT (Junction to Case) RθJC (IGBT) — — 0.69 °C/W MGF65A3H KGF65A3H — — 2.08 FGF65A3H Thermal Resistance of Diode (Junction to Case) RθJC (Di) — — 1.15 °C/W MGF65A3H KGF65A3H — — 2.28 FGF65A3H (1) IC and IF are determined by the maximum junction temperature for TO3P-3L package. (2) Determined by bonding wires capability.

KGF65A3H, MGF65A3H, FGF65A3H xGF65A3H-DSE Rev.1.3 SANKEN ELCTRIC CO., LTD. 3 Oct. 12, 2016 http://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016

Electrical Characteristics

Unless otherwise specified, TA = 25 °C Parameter Symbol Conditions Min. Typ. Max. Unit Collector to Emitter Breakdown Voltage V(BR)CES IC = 100 μA, VGE = 0 V 650 — — V Collector to Emitter Leakage Current ICES VCE = 650 V, VGE = 0 V — — 100 µA Gate to Emitter Leakage Current IGES VGE = ±30 V — — ±500 nA Gate Threshold Voltage VGE(TH) VCE = 10 V, IC = 1 mA 4.0 5.5 7.0 V Collector to Emitter Saturation Voltage VCE(sat) VGE = 15 V, IC = 30 A — 1.9 2.37 V Input Capacitance Cies VCE = 20 V, VGE = 0 V, f = 1.0 MHz, — 1800 — pF Output Capacitance Coes — 200 — Reverse Transfer Capacitance Cres — 80 — Gate Charge Qg VCE = 520 V, IC = 30 A, VGE = 15 V — 60 — nC Turn-on Delay Time td(on) TJ = 25 °C, see Figure 1. — 30 — ns Rise Time tr — 30 — Turn-off Delay Time td(off) — 90 — Fall Time tf — 30 — Turn-on Energy (3) Eon — 0.5 — mJ Turn-off Energy Eoff — 0.4 — Turn-on Delay Time td(on) TJ = 175 °C, see Figure 1. — 30 — ns Rise Time tr — 30 — Turn-off Delay Time td(off) — 120 — Fall Time tf — 60 — Turn-on Energy (3) Eon — 1.0 — mJ Turn-off Energy Eoff — 0.7 — Emitter to Collector Diode Forward Voltage VF IF = 30 A — 1.8 — V Emitter to Collector Diode Reverse Recovery Time trr IF = 30 A, di/dt = 700 A/μs — 50 — ns (3) Energy losses include the reverse recovery of diode.

Figure 1. Test Circuits and Waveforms of dv/dt and Switching Time

Figure 29. Transient Thermal Resistance (TO3PF-3L)

KGF65A3H, MGF65A3H, FGF65A3H xGF65A3H-DSE Rev.1.3 SANKEN ELCTRIC CO., LTD. 13 Oct. 12, 2016 http://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 Physical Dimensions

  • TO247-3L
  • TO3P-3L

KGF65A3H, MGF65A3H, FGF65A3H xGF65A3H-DSE Rev.1.3 SANKEN ELCTRIC CO., LTD. 14 Oct. 12, 2016 http://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016

  • TO3PF-3L NOTES: - All dimensions in millimeters - Pin treatment for TO247, TO3P and TO3PF: Pb-free (RoHS compliant) - When soldering the products, make sure to minimize the working time within the following limits: Flow: 260 ± 5 °C / 10 ± 1 s, 2 times Soldering Iron: 380 ± 10 °C / 3.5 ± 0.5 s, 1 time (Soldering should be at a distance of at least 1.5 mm from the body of the products.) - Soldering should be at a distance of at least 1.5 mm from the body of the products. - The recommended screw torque for TO247, TO3P and TO3PF: 0.686 to 0.882 N∙m (7 to 9 kgf∙cm) Marking Diagram (a) Part Number YMDD XX FGF65A3H (b) Lot Number Y is the last digit of the year of manufacture (0 to 9). M is the month of the year (1 to 9, O, N or D). DD is the day of the month (01 to 31). XX is the control number. MGF65A3HKGF65A3H YMDD XXYMDD XX TO3PF-3LTO3P-3LTO247-3L (a) (b) (a) (b) (a) (b)

KGF65A3H, MGF65A3H, FGF65A3H xGF65A3H-DSE Rev.1.3 SANKEN ELCTRIC CO., LTD. 15 Oct. 12, 2016 http://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 Important Notes

  • All data, illustrations, graphs, tables and any other information included in this document as to Sanken’s products listed herein (the “Sanken Products”) are current as of the date this document is issued . All contents in this document are subject to any change without notice due to improvement of the Sanken Products , etc. Please make sure to confirm with a Sanken sales representative that the contents set forth in this document reflect the latest revisions before use.
  • The Sanken Products are intended for use as components of general purpose electronic equipment or apparatus (such as home appliances, office equ ipment, telecommunication equipment, measuring equipment, etc.). Prior to use of the Sanken Products, please put your signature, or affix your name and seal, on the specification documents of the Sanken Products and return them to Sanken. When considering use of the Sanken Products for any applications that require high er reliability (such as transportation equipment and its control systems, traffic signal control systems or equipment , disaster/crime alarm systems, various safety devices, etc.), you must contact a Sanken sales representative to discuss the suitability of such use and put your signature, or affix your name and seal, on the specification documents of the Sanken Products and return them to Sanken, prior to the use of the Sanken Products. The Sanken Products are not intended for use in any applications that require extremely high reliability such as: aerospace equipment; nuclear power control systems; and medical equipment or systems, whose failure or malfunction may result in death or serious in jury to people, i.e., medical devices in Class III or a higher class as defined by relevant laws of Japan (collectively, the “Specific Applications”). Sanken assumes no liability or responsibility whatsoever for any and all damages and losses that may be s uffered by you, users or any third party, resulting from the use of the Sanken Products in the Specific Applications or in manner not in compliance with the instructions set forth herein.
  • In the event of using the Sanken P roducts by either (i) combining ot her products or materials therewith or (ii) physically, chemically or otherwise processing or treating the same, you must duly consider all possible risks that may result from all such uses in advance and proceed therewith at your own responsibility.
  • Although Sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the occurrence of any failure or defect in semiconductor products at a certain rate. You must take, at your own responsibility, preventative measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which the Sanken Products are used, upon due consideration of a failure occurrence rate or derating, etc., in order not to cause any human injury or death, fire accident or social harm which may result from any failure or malfunction of the Sanken Products. Please refer to the relevant specification documents and Sanken’s official website in relation to derating.
  • No anti-radioactive ray design has been adopted for the Sanken Products.
  • No contents in this document can be transcribed or copied without Sanken’s prior written consent.
  • The circuit constant, operation examples, circuit examples, pattern layout examples, design examples, recommended examples, all information and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of use of the Sanken Products and Sanken assume s no responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third party, or any possible infringement of any and all property rights including intellectual property rights and any other rights of you, users or any third party, resulting from the foregoing.
  • All technical information described in this document (the “Technical Information”) is presented for the sole purpose of reference of use of the Sanken Products and no license, express, implied or otherwise, is granted hereby under any intellectual pr operty rights or any other rights of Sanken.
  • Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any kind, whether express or implied, including, without limitation, any warranty (i) as to the quality or performance of the Sanken Products (such as implied warranty of merchantability, or implied warranty of fitness for a particular purpose or special environment), (ii) that any Sanken Pro duct is delivered free of claims of third parties by way of infringement or the like, (iii) that may arise from course of performance, course of dealing or usage of trade, and (iv) as to any information contained in this document (including its accuracy, usefulness, or reliability).
  • In the event of using the Sanken Products, you must use the same after carefully examining all applicable environmental laws and regulations that regulate the inclusion or use of any particular controlled substances, including , but not limited to, the EU RoHS Directive, so as to be in strict compliance with such applicable laws and regulations.
  • You must not use the Sanken Products or the Technical Information for the purpose of any military applications or use, including but not limited to the development of weapons of mass destruction. In the event of exporting the Sanken Products or the Technical Information, or providing them for non -residents, you must comply with all applicable export control laws and regulations in each country including the U.S. Export Administration Regulations (EAR) and the Foreign Exchange and Foreign Trade Act of Japan, and follow the procedures required by such applicable laws and regulations.
  • Sanken assumes no responsibility for any troubles, which may occur during the transportation of the Sanken Products including the falling thereof, out of Sanken’s distribution network.
  • Although Sanken has prepared this document with its due care to pursue the accuracy thereof, Sanken does not warrant that it is error free and Sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting from any possible errors or omissions in connection with the contents included herein.
  • Please refer to the relevant specification documents in relation to particular precautions when using the Sanken Products, and re fer to our official website in relation to general instructions and directions for using the Sanken Products.
  • All rights and title in and to any specific trademark or tradename belong to Sanken or such original right holder(s). DSGN-CEZ-16002