MF-R600 BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

■ Radial Leaded Devices ■ Maximum 600 VAC interrupt fault rating ■ Available in matched resistance “bins” ■ Ability to withstand lightning surges ■ RoHS compliant*, lead free ■ Agency recognition:

Applications

Customer Premise Equipment (CPE): ■ Modems ■ Cable modems ■ Fax machines ■ POS equipment ■ Security equipment ■ Set top boxes Maximum Device Surface Temperature +60 °C, 1000 hours ±5 % typical resistance change +125 °C to -55 °C,10 times ±15 % typical resistance change Environmental Characteristics Test Test Conditions Accept/Reject Criteria Test Procedures And Requirements For Model MF-R/600 Series Thermal Derating Chart - Ihold (Amps) Ambient Operating Temperature Model -40 °C -20 °C0 °C 23 °C 40 °C 50 °C 60 °C 70 °C 85 °C Itrip is approximately two times Ihold. *RoHS COMPLIANT

Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. How to Order MF - R 015/600 - A 05 - 2 Multifuse® Product Designator Series R = Radial Leaded Component Hold Current, Ihold 015-016 (0.15 - 0.16 Amps) Max. Interrupt Voltage, V Resistance Range Narrow resistance ranges are available on all models as defined in Electrical Characteristics. Resistance Bins Narrow resistance ranges can be separated into packages where each device is within 0.5 ohms of each other. Packaging Options - 0 = Bulk Packaging - 2 = Tape and Reel* *Packaged per EIA486-B Maximum Time to Trip at 23 ˚C 1000 100 0.10 0.00 Fault Current (Amps) Time to Trip (Seconds) MF-R016/600 MF-R015/600 MF-R/600, REV. E, 11/04 Product Dimensions Packaging options: BULK: 500 pcs. per bag. TAPE & REEL: 600 pcs. per reel. Longer lead lengths available upon request. MF-R/600 Series - Telecom PTC Resettable Fuses MM (INCHES)DIMENSIONS = ED B CA Typical Part Marking Represents total content. Layout may vary. R015 24001K MANUFACTURER'S TRADEMARKPART IDENTIFICATION DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; SECOND DIGIT = MONTH; NEXT THREE DIGITS = LOT CODE) MFG. LOCATION (K = KOREA S = CHINA) Model Rmin. Rmax. R1Max. Bin MF-R015/600 6.0 12.0 22.0 N/A MF-R015/600-A 7.0 10.0 20.0 0.5 MF-R015/600-B 9.0 12.0 22.0 0.5 MF-R015/600-F 7.0 12.0 22.0 0.5 MF-R016/600 4.0 10.0 18.0 N/A MF-R016/600-A 4.0 7.0 16.0 0.5 MF-R016/600-1 4.0 8.0 17.0 0.5 Resistance Options Additional Features ■ Ability to withstand AC power cross conditions

Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details. IEC EIA Dimensions Dimension Description Mark Mark Dimensions Tolerance Carrier tape width WW Hold down tape width: W0 W4 min. Hold down tape No protrusion Top distance between tape edges W2 W6 max. Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) HH Abscissa to plane (kinked lead) H0 H0 Abscissa to top (straight lead) H1 H1 max. Abscissa to top (kinked lead) H1 H1 max. Overall width w/lead protrusion (straight lead) C1 max. Overall width w/lead protrusion (kinked lead) C1 max. Overall width w/o lead protrusion (straight lead) C2 max. Overall width w/o lead protrusion (kinked lead) C2 max. Lead protrusion I1 L1 max. Protrusion of cutout LL max. Protrusion beyond hold tape I2 I2 Not specified Sprocket hole pitch P0 P0 Pitch tolerance 20 consecutive Device pitch: MF-R005–MF-R160, MF-R/90, MF-RX110/72–MF-RX185/72, MF-R/72 Device pitch: MF-R185–MF-R400, MF-RX110–MF-RX375 MF-R/600, MF-RX250/72–MF-RX375/72 Tape thickness tt max. Tape thickness with splice: MF-R010–MF-R160, t1 max.MF-R/72, MF-RX110/72–MF-RX185/72, Tape thickness with splice: MF-R250–MF-R1100 MF-RX110–MF-RX375, MF-R/90, MF-RX250/72–MF-RX375/72 t1 max. Splice sprocket hole alignment 0 Body lateral deviation ∆h ∆h 0 Body tape plane deviation ∆p ∆p 0 Lead spacing FF Reel width wW 2 max. Reel diameter da max. Space between flanges less device W1 h MF-R, MF-R/72, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications (.709) -0.5/+1.0 (-0.02/+.039) (.354) -0.5/+0.75 (-0.02/+0.03) (.157) ±0.2 (±.0078) 18.5 (.728) ±3.0 (±.118) (.63) 32.2 (1.268) 38.0 (1.496) 43.2 (1.7) 55.0 (2.165) 42.5 (1.673) 54.0 (2.126) 1.0 (.039) (.433) ±0.5 (±.02) 12.7 (0.5) 12.7 (0.5) 25.4 (1.0) 0.9 (.035) 1.5 (.059) 2.3 (.091) 5.08 (0.2) (2.205) 370 (14.57) ±0.3 (±.012) (±.039) ±0.3 (±.012) ±0.6 (±.024) ±0.3 (±.012) ±1.0 (±.039) ±1.3 (±.051) ±0.2 (±.008) 4.75 (.187) ±3.25 (±.128) (.433) (.118) DIMENSIONS = MM (INCHES)

MF-R, MF-R/72, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. t User direction of feed Cross section A - B ∆p ∆p H Reference plane W A B F D0P0I1 L ∆h∆h h w h f d Reel Upper side Tape Lower side User direction of feed Reel Dimensions - Figure 2 Taped Component Dimensions - Figure 1 DIMENSIONS = MM (INCHES) IEC EIA Dimensions Dimension Description Mark Mark Dimensions Tolerance Arbor hole diameter fc Core diameter: MF-R, MF-RX, MF-R/90 hn max. Core diameter: MF-RX/250, MF-R/600 hn max. Box: MF-R, MF-RX, MF-R/90 max. Box: MF-RX/250 max. Box: MF-R/600 max. Consecutive missing places: MF-R, MF-RX, MF-R/90 3 max. Consecutive missing places: MF-RX/250, MF-R/600 none Empty places per reel: MF-R, MF-RX, MF-R/90 Not specified Empty places per reel: MF-RX/250, MF-R/600 0.1 % (1.024) (3.15) (2.2) 372 (14.6) 372 (14.6) ±12.0 (±.472) (3.58) (2.64) 372 (14.6) 362 (14.25) (2.52) 372 (14.6) 362 (14.25)