MFR-1150 METCAL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
60W Desolder / Solder System With Vacuum Workstand Makes Desoldering Clean and Easy Metcal's MFR-1150 Desoldering System is a powerful, cost- effective system with a small footprint. The MR-1150 ihas a powerful 0.85 bar vacuum built into the workstand which makes through- hole desoldering clean and easy. The MFR-1150 system includes a Desoldering Pistol with an easy to change, large capacity solder collection chamber to ensure minimum downtime. The pistol can easily be converted to a pencil grip for additional control. Metcal offers a wide range of long life desoldering tips that will keep your equipment working efficiently. The MFR-1150 series is the best choice for small or large production environments which need exceptional desoldering and soldering performance from a unit with a small footprint. MFR-1150 Unit Features and Benefits
- Workstation uses shop air to create a vacuum that makes desoldering easier
- Large capacity collection chamber reduces downtime
- Pistol handpiece can easily be converted to a pencil grip for additional control
- Large selection of DxP desoldering tips www.metcal.com 2/2016Pg 1 Desoldering pistol can easily be changed to a pencil grip for additional control. Large capacity desoldering collection chamber is easy to change, reducing downtime MFR-PS1100 Power Supply Input Line Voltage / Frequency 100-240 VAC / 50/60Hz Power Consumption 65 Watts Max. Output Power / Frequency 60 Watts Max.*/ 450 KHz Dimensions (approx.) W x D x H 90 x 200 x 152.5mm (3.5” x 8” x 6”) MFR-1150 System Idle Tip Temperature Stability +/- 1.1°C (2°F) in still air Ambient Operating Temperature 10 - 40°C (50 - 104°F) Maximum Enclosure Temperature 55°C (131°F) Tip to Ground Potential <2mV Tip to Ground Resistance <2 Ohms Surface Resistivity 105 – 109 Ohm Approvals cTUVus, CE MFR-H5-DS Desolder Hand-piece Power Cord (3-wire) 183cm (72”) Solder Hand-piece Cable Length 152 cm (60”), burn proof, ESD safe Hand-piece Connector 8 Pin Power Connector MFR-WSDSX Vacuum Workstand Input Voltage / Power 24V / 15W Dimensions (approx.) W x D x H 100 x 200 x 140mm (4” x 8” x 5.5”) Noise Level < 55 dB Recommended Air Pressure Input 550kPa (80PSI) - Shop Air Required Vacuum Suction Force 0.85 bar (25” Hg) * RF SmartHeat Technology provides greater power. For more details, visit www.metcal.com/smartheat Technical Specifications
Desoldering System With Vacuum Workstand PRODUCT UPDATEwww.metcal.com MFR-1150 System and Accessories Pg 2 The MFR-H5-DS Desolder Hand- piece plugs directly into the Vacuum Workstand (MFR-WSDSX) which provides .85 bar suction force using your shop air to remove unwanted solder. Also Available - MFR-1150 Desoldering / Soldering Unit Part No. Photo Description MFR-1150 Desolder System with Vacuum Workstand Includes: MFR-PS1100 A Power Supply MFR-H5-DS B Desolder Hand-piece MFR-WSDSX C Vacuum Workstand for Desolder Hand-piece MFR-FTKIT Air Hose/Fittings Kit (For Shop Air Connections) AC-TC D Desolder Tip Cleaning Tool Accessories and Replacement Parts (SOLD SEPARATELY) DXP Tips E Desoldering Tips MFR-DC10 F Disposable Collection Chamber for MFR-H5-DS (10/pk) MFR-DC100 F Disposable Collection Chamber for MFR-H5-DS (100/pk) MFR-PG G Replacement Pistol Grip for HS-DS Hand-piece DxP Desoldering Tips. See below Disposable Collection Chamber Replacement Pistol Grip for MRF-H5-DS Hand-Piece E F G A C D B