MFR-2220

MFR-2200 METCAL | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 8

Technical content

Dual Output 60W Solder / Rework Station Series MFR-2200: 2 Outputs and 5 Handpiece Options: There Is A System That’s Right For You Metcal's MFR-2200 Soldering/Desoldering Stations are powerful, cost-effective systems that have a wide variety of options and accessories to meet just about any application. The MFR-2200 power supply has 2 outputs, so your operators can use 2 hand-pieces simultaneously. 5 hand-pieces are available, including a desoldering option, so the MFR-2200 can meet just about any need. The MFR-2200 series uses SmartHeat ® Technology, a microprocessor controlled heating system which operates at lower temperatures and eliminates calibration time. With both soldering and desoldering capabilities, the MFR-2200 eliminates the need for two separate units. The MFR-2200 series is the best choice for small or large production environments which need a versatile soldering system with a small footprint. MFR-2200 Series Features and Benefits

• Many options so you can create the system you need
• Dual 60W output enables you to use two hand-pieces simultaneously.
• SmartHeat ® tips and cartridges sense the load and instantly delivers the right amount of heat to the joint.
• No calibration required which saves money and down-time. www.metcal.com Technical Specifications Pg 1 Part No. MFR-2200 Series Ambient Operating Temp. 10 - 40°C (50 - 104°F) Max. Enclosure Temp. 55°C (131°F) Input Line Voltage 100 - 240 VAC Power Consumption 130W Max. Input Line Frequency 50/60 Hz grounded circuit Output Power 60W @ 22°C/output (2 outputs)* Output Frequency 450 KHz Power Cord (3-wire) 183cm (6’), 18/3 SJT Dimensions (approx.) W x D x H 170 x 200 x 152.5mm (7” x 8” x 6”) Weight 2.97 kg (6.55 lbs) Surface Resistivity 105-10Z Ohms Certification / Marking cTUVus, CE Soldering Handle and Coil Assembly Specifications Tip-to-Ground Potential < 2 mV RMS Tip-to-Ground Resistance <2 ohms Idle Temperature Repeatability ± 1.1°C (2°F) in still air Handle Cord Assembly Length 122cm (4’) – burn proof, ESD safe Connector 8-pin circular DIN Workstand W x D x H 100 x 200 x 100mm (4” x 8” x 4”) Workstand Weight 0.69 kg (1.51 lbs) * RF SmartHeat Technology provides greater power. More details at www.metcal.com/smartheat

5 Hand-piece Options

Solder Cartridge Hand-piece (MFR-H1-SC2) Standard equipment with MFR-2210/2211 Tip Solder Hand-piece (MFR-H2-ST2) Standard equipment with MFR-2220/2222 Precision Tweezer Solder Hand-piece (MFR-H4-TW). Standard equipment with MFR-2240/2241 Desolder Hand-piece (MFR-H5-DS). Available as an accessory; see page 3 SSC Cartridge Solder Hand-piece (MFR-H6-SSC). Can be used with cartridges from Metcal’s SP200 Soldering Station. Available as an accessory; see page 3

Dual 60W Solder / Rework Station PRODUCT UPDATEwww.metcal.com 8/2016Pg 2 Each system includes

1 Tip Cleaner per

See pg. 4 SxV Soldering Tips See pgs. 6 - 7 G Part No. Photo Qty. Description MFR-2210 1 Solder Station w/Solder Cartridge Hand-piece Includes: MFR-PS2200 A 1 MFR-PS2200 Power Supply (60W per output) MFR-H1-SC2 B 1 Soldering Cartridge Hand-piece WS1 E 1 Universal Soldering Workstand SxP & RxP Cart. G Soldering/Rework Cartridges (SOLD SEPARATELY) MFR-2211 2 Solder Station w/2 Solder Cartridge Hand-pieces Includes: MFR-PS2200 A 1 MFR-PS2200 Power Supply (60W per output) MFR-H1-SC2 B 2 Soldering Cartridge Hand-piece WS1 E 2 Universal Soldering Workstand SxP & RxP Cart. G Soldering/Rework Cartridges (SOLD SEPARATELY) MFR-2220 3 Solder Station w/Solder Tip Hand-piece Includes: MFR-PS2200 A 1 MFR-PS2200 Power Supply (60W per output) MFR-H2-ST2 C 1 Soldering Tip Hand-piece WS1 E 1 Universal Soldering Workstand SxV & CxV Tips H Soldering/Blade Tips (SOLD SEPARATELY) MFR-2222 4 Solder Station w/2 Solder Tip Hand-pieces Includes: MFR-PS2200 A 1 MFR-PS2200 Power Supply (60W per output) MFR-H2-ST2 C 2 Soldering Tip Hand-piece WS1 E 2 Universal Soldering Workstand SxV & CxV Tips H Soldering/Blade Tips (SOLD SEPARATELY) MFR-2240 5 Solder Station w/Tweezer Cartridge Hand-piece Includes: MFR-PS2200 A 1 MFR-PS2200 Power Supply (60W per output) MFR-H4-TW D 1 Tweezer Cartridges Hand-piece MFR-WSPT F 1 Tweezer Hand-piece Workstand TxP Cartridges I Tweezer Cartridges (SOLD SEPARATELY) MFR-2240 6 Solder Station w/Solder & Tweezer Cart. Hand-piece Includes: MFR-PS2200 A 1 MFR-PS2200 Power Supply (60W per output) MFR-H1-SC2 B 1 Soldering Cartridge Hand-piece MFR-H4-TW D 1 Tweezer Cartridges Hand-piece WS1 C 1 Universal Soldering Workstand MFR-WSPT F 1 Tweezer Hand-piece Workstand TxP Cartridges I Tweezer Cartridges (SOLD SEPARATELY) SxP & RxP Cart. G Soldering/Rework Cartridges (SOLD SEPARATELY) H IRxP Rework Cartridges See pg. 5 CxV Blade Tips - See pg. 7 MFR-UK5 Desoldering Kit - Desolder Hand-piece (MFR-H5-DS) and Venturi Workstand (MFR-WSDSX) also available. See page 3 for additional upgrade kits. See page 3 for additional accessories MFR-2200 Series Stations A E E E E C F F A A A A A B B B C C D D TxP Tweezer Cartridges See pg. 8 Unit includes a 3 position switch (left/both/right) so you can use a single hand-piece or 2 hand- pieces simultaneously

PRODUCT UPDATEwww.metcal.com 8/2016Pg 3 Metcal MFR-2200 Series Accessories and Replacement Parts

PRODUCT UPDATEwww.metcal.com 8/2016Pg 4 Metcal MFR-2200 Series SxP Solder & Rework Cartridges Compatible with: MFR-1110, MFR-1161, MFR-1351, MFR-2211, MFR-2241 Systems and MFR-H1-SC hand-piece SFP-CH10 STP-CH10 SCP-CH10 SFP-CH15 STP-CH15 SCP-CH15 SFP-CHB15 STP-CHB15 SCP-CHB15 SFP-CH20 STP-CH20 SCP-CH20 SFP-CHL20 STP-CHL20 SCP-CHL20 SFP-CH25 STP-CH25 SCP-CH25 SFP-CH30 STP-CH30 SCP-CH30 SFP-CH35 STP-CH35 SCP-CH35 SFP-CH50 STP-CH50 SCP-CH50 0.36" 9.2mm 0.04" 1mm 0.39" 10mm 0.06" 1.5mm 0.4" 10.0m 0.632” 16.04mm m 0.08" 2.0mm .394" 10mm 0.1" 2.5mm 0.12" 3.0mm 0.43" 11.0mm 0.14" 3.5mm 0.43" 11.0mm 0.3" 7.6mm 0.2" 5mm 0.474” 12.04mm0.06” 1.5mm 0.08” 2.0mm F = FR4 / Fiberglass, for most standard applications T = Temperature Sensitive C = Ceramic for high thermal demand applications. SXP SOLDERING & REWORK CARTRIDGES CHISEL SFP-CN04 STP-CN04 SCP-CN04 SFP-CNB04 STP-CNB04 SCP-CNB04 SFP-CNL04 STP-CNL04 SCP-CNL04 SFP-CN05 STP-CN05 SCP-CN05 SFP-CNB05 STP-CNB05 SCP-CNB05 SFP-CNL06 SCP-CNL06 SFP-BVL10 STP-BVL10 SCP-BVL10 0.34" 8.6mm 0.6" 15.21mm 0.59" 14.9mm 0.579" 14.7mm 0.016” 0.4mm 0.016” 0.4mm 0.016” 0.4mm 0.02" 0.5mm 0.56" 14.22mm 0.04" 1.0mm CONICALBEVEL SFP-DRH05 STP-DRH05 SCP-DRH05 SFP-DRH610 STP-DRH610 SCP-DRH610 SFP-DRH15 STP-DRH15 SCP-DRH15 SFP-DRH615 STP-DRH615 SCP-DRH615 SFP-DRH35 STP-DRH35 SCP-DRH35 SFP-DRK50 STP-DRK50 SCP-DRK50 0.6" 15.21mm 0.02" 0.5mm .45" 11.6 mm .039" 1.0mm 0.63" 16mm 0.2" 5.0mm .06" 1.5mm 60° .46" 11.6mm HOOFKNIFE STP-WV30 SFP-WV30 SCP-WV30 STP-WV20 SFP-WV20 SCP-WV20 HOOF

www.metcal.com PRODUCT UPDATE Pg 5 Compatible with: MFR- 1110, MFR-1161, MFR-1351, MFR-2211, MFR-2241 Systems, MFR-H1-SC and MFR-H1-SC2 hand-pieces. All dimensions shown are in mm (inches) .36" 9.14mm .02" 0.5mm .87" 22.1mm A D A D F = FR4 / Fiberglass, for most standard applications T = Temperature Sensitive C = Ceramic for high thermal demand applications. RXP REWORK CARTRIDGES BLADETUNNE LSLOT B A A B D SMT TYPE RFP-BL1 RCP-BL1 (0.41) - - - RFP-BL2 RCP-BL2 15.6 (0.62) - - - RFP-BL3 RCP-BL3 22.1 (0.87) - - - RFP-DL1 RCP-DL1 5.18 (0.204) 10.16 (0.40) 3.22 (0.127) Tunnel SOIC-14-16 RFP-DL2 RCP-DL2 5.18 (0.204) 4.32 (0.17) 2.29 (.09) Tunnel SOIC-8 RFP-DL3 RCP-DL3 6.86 (.270) 11.15 (0.44) 2.29 (.09) Tunnel SOIC-16 RFP-SL1 RCP-SL1 2.34 (.092) 1.37 (.054) 1.78 (.07)

0805 Chip

3.48 (.137) 1.63 (.064) 1.78 (.07)

1206 Chip

D QUAD A A2 D B B2 SMT TYPE RFP-QD4 RCP-QD4 12.70 (.500) 11.43 (.450) 3.81 (.150) 15.24 (.600) 13.97 (.550) PLCC 32 RFP-QD6 RCP-QD6 17.78 (.700) 16.76 (.660) 3.81 (.150) 17.78 (.700) 16.76 (.660) PLCC 44 RFP-QD7 RCP-QD7 25.27 (.995) 24.38 (.960) 5.59 (.220) 25.27 (.995) 24.38 (.960) PLCC 68 RFP-QD10 RCP-QD10 20.32 (.800) 19.30 (.760) 3.81 (.150) 20.32 (.800) 19.30 (.760) PLCC 52 RFP-QD15 RCP-QD15 13.34 (.525) 12.32 (.485) 2.79 (.110) 13.34 (.525) 12.32 (.485) TQFP 80 RFP-QD19 RCP-QD19 16.13 (.635) 16.13 (.635) 3.30 (.130) 16.13 (.635) 16.13 (.635) QFP 44 RFP-QD20 RCP-QD20 16.51 (.650) 16.51 (.650) 3.30 (.130) 22.48 (.885) 22.48 (.885) QFP 100 B A D Metcal MFR-2200 Series RxP Rework Cartridges

PRODUCT UPDATEwww.metcal.com 8/2016Pg 6 Metcal MFR-2200 Series SxV Solder Tips

PRODUCT UPDATEwww.metcal.com 8/2016Pg 7 Metcal MFR-2200 Series SxV Solder Tips / CxV Blade Tips

www.metcal.com PRODUCT UPDATE Pg 8 Metcal MFR-2200 Series TxP Tweezer Cartridges Compatible with: MFR-1140, MFR-2240, MFR2241 Systems and MFR-H4-TW hand-piece TFP-BLP1 TTP-BLP1 TCP-BLP1 TFP-BLP2 TTP-BLP2 TCP-BLP2 TFP-CNP1 TTP-CNP1 TCP-CNP1 Conical .55" 14mm .04" 1.0mm .03" 0.76mm .55" 14mm .079" 2.0mm .03" 0.76mm .75" 19.1mm .015" .38mm 0.055" 1.4mm A 0.028" 0.57mm F = FR4 / Fiberglass, for most standard applications T = Temperature Sensitive C = Ceramic for high thermal demand applications. TXP TWEEZER CARTRIDGES_ A TFP-BLH40 TTP-BLH40 TCP-BLH40 6.35mm (.25") TFP-BLH50 TTP-BLH50 TCP-BLH50 16mm (.62") TFP-BLH60 TTP-BLH60 TCP-BLH60 20.5mm (.81") TFP-BLH70 TTP-BLH70 TCP-BLH70 28mm (1.1") BLADEHEAV Y DUTY Compatible with: MFR-1150, MFR-1350, MFR-1351 systems with MFR-H5-DS hand-piece and previous MFR-DSX, -DSI, -SDX, -SDI Systems with MFR-HDS hand-piece. All dimensions shown are in mm (inches)DXP DESOLDERING TIPS Standard Long Reac h 5.54mm 0.218" 12.80mm 0.503" A B TYPE DFP-CN2 DCP-CN2 0.64 (.025) 1.78 (.070) Standard DFP-CN3 DCP-CN3 0.76 (.030) 2.03 (.080) Standard DFP-CN4 DCP-CN4 1.02 (.040) 2.28 (.090) Standard DFP-CN5 DCP-CN5 1.27 (.050) 2.64 (.104) Standard DFP-CN6 DCP-CN6 1.52 (.060) 2.84 (.112) Standard DFP-CN7 DCP-CN7 2.41 (.095) 3.63 (.143) Standard DFP-CNL3 DCP-CNL3 0.76 (.030) 2.03 (.080) Long Reach DFP-CNL4 DCP-CNL4 1.02 (.040) 2.28 (.090) Long Reach DFP-CNL5 DCP-CNL5 1.27 (.050) 2.64 (.104) Long Reach