MFP-B32632634

MFP-B32632634 TDK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 27

Technical content

Metallized Polypropylene Film Capacitors (MFP) Series/Type: B32632 ... B32634 Date: December 2012 © EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Switch-mode power supplies Electronic ballasts HID lamps Climatic Max. operating temperature: 110 °C Climatic category (IEC 60068-1): 55/100/56 Construction Dielectric: polypropylene (PP) Film metallized on one side and metal foils internally connected in series Contact layer of sprayed metal Wound capacitor technology Epoxy resin coating (UL 94 V-0)

Features

Highest possible contact reliability Very high pulse strength Self-healing properties RoHS-compatible Terminals Crimped wire leads, lead-free tinned, lead length (6 1 mm) Double crimped wire leads, lead-free tinned Straight wire leads, lead-free tinned, lead length (17 ±3 mm) Different lead spacings (reduced and enlarged) available, lead length (6 1 mm) Marking Manufacturer's logo, style and type (P63x), rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“. Metallized polypropylene film capacitors (MFP) B32632 ... B32634 Very high pulse (wound) Page 2 of 27Please read Cautions and warnings and Important notes at the end of this document.

Detail of double crimped version Dimensions in mm Lead spacing ±0.8 Lead diameter Type 15.0 0.8 B32632 22.5 0.8 B32633 27.5 0.8 B32634 B32632 ... B32634 Very high pulse (wound) Page 3 of 27Please read Cautions and warnings and Important notes at the end of this document.

Overview of available types Lead configurations Series Standard Reduced Straight Double crimped B32632 15 mm 7.5 / 10 / 12.5 mm 15 mm 15 mm B32633 22.5 mm 15 / 17.5 / 20 mm 22.5 mm 22.5 mm B32634 27.5 mm 25 mm 27.5 mm 27.5 mm Lead spacing 15.0 mm 22.5 mm Type B32632 B32633 VR (V DC) 630 1250 1600 2000 3000 630 1250 1600 2000 2500 3000 VRMS (V AC) 300 450 450 500 750 300 450 450 500 750 750 CR (nF) 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100 B32632 ... B32634 Very high pulse (wound) Page 4 of 27Please read Cautions and warnings and Important notes at the end of this document.

Overview of available types Lead configurations Series Standard Reduced Straight Double crimped B32632 15 mm 7.5 / 10 / 12.5 mm 15 mm 15 mm B32633 22.5 mm 15 / 17.5 / 20 mm 22.5 mm 22.5 mm B32634 27.5 mm 25 mm 27.5 mm 27.5 mm Lead spacing 27.5 mm Type B32634 VR (V DC) 630 1250 1600 2000 VRMS (V AC) 300 450 450 500 CR (nF) 100 150 220 330 B32632 ... B32634 Very high pulse (wound) Page 5 of 27Please read Cautions and warnings and Important notes at the end of this document.

Ordering codes and packing units (lead spacing 15 mm) VR V DC VRMS f ≤1 kHz V AC CR nF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./MOQ Untaped pcs./MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. B32632B2471M* and B32632B2681M* are only available in M tolerance. B32632B4471K* and B32632B4681K* are only available in K tolerance. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17 ±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 7.5 mm 10 mm 12.5 mm 17.5 mm Packaging code 030 040 050 060 630 300 2.2 6.0 × 11.5 × 18.5 B32632B6222+* 3600 4800 4000 3.3 6.0 × 11.5 × 18.5 B32632B6332+* 3600 4800 4000 4.7 6.0 × 11.5 × 18.5 B32632B6472+* 3600 4800 4000 6.8 6.0 × 11.5 × 18.5 B32632B6682+* 3600 4800 4000 10 6.0 × 11.5 × 18.5 B32632B6103+* 3600 4800 4000 15 6.5 × 12.0 × 18.5 B32632B6153+* 3200 4000 4000 22 7.5 × 13.5 × 18.5 B32632B6223+* 2800 3600 4000 33 9.0 × 15.0 × 18.5 B32632B6333+* 2400 3200 2000 47 11.0 × 16.5 × 18.5 B32632B6473+* 1800 2400 2000 1250 450 1.0 6.0 × 11.5 × 18.5 B32632B7102+* 3400 4400 4000 1.5 6.0 × 11.5 × 18.5 B32632B7152+* 3400 4400 4000 2.2 6.5 × 12.0 × 18.5 B32632B7222+* 3400 4400 4000 3.3 6.5 × 12.0 × 18.5 B32632B7332+* 3200 4000 4000 4.7 7.0 × 12.5 × 18.5 B32632B7472+* 3200 4000 4000 6.8 7.5 × 14.0 × 18.5 B32632B7682+* 3000 4000 4000 10 9.0 × 15.0 × 18.5 B32632B7103+* 2400 3200 2000 15 11.5 × 16.5 × 18.5 B32632B7153+* 1800 2400 2000 B32632 Very high pulse (wound) Page 6 of 27Please read Cautions and warnings and Important notes at the end of this document.

Ordering codes and packing units (lead spacing 15 mm) VR V DC VRMS f ≤1 kHz V AC CR nF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./MOQ Untaped pcs./MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. B32632B2471M* and B32632B2681M* are only available in M tolerance. B32632B4471K* and B32632B4681K* are only available in K tolerance. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: M = ±20% K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17 ±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 7.5 mm 10 mm 12.5 mm 17.5 mm Packaging code 030 040 050 060 1600 450 1.0 6.0 × 11.5 × 18.5 B32632B1102+* 3600 4800 4000 1.5 6.0 × 11.5 × 18.5 B32632B1152+* 3600 4800 4000 2.2 6.5 × 12.0 × 18.5 B32632B1222+* 3200 4000 4000 3.3 7.5 × 13.0 × 18.5 B32632B1332+* 2800 3600 4000 4.7 8.5 × 14.0 × 18.5 B32632B1472+* 2400 3200 4000 6.8 9.5 × 15.0 × 18.5 B32632B1682+* 2000 2800 2000 10 11.5 × 17.0 × 18.5 B32632B1103+* 1800 2400 2000 2000 500 0.47 6.5 × 11.5 × 18.5 B32632B2471M* 3400 4400 4000 0.68 6.5 × 12.0 × 18.5 B32632B2681M* 3400 4400 4000 1.0 6.5 × 12.0 × 18.5 B32632B2102+* 3400 4400 4000 1.5 6.5 × 12.0 × 18.5 B32632B2152+* 3400 4400 4000 2.2 7.0 × 13.0 × 18.5 B32632B2222+* 2400 4000 2000 3.3 8.5 × 14.5 × 18.5 B32632B2332+* 2600 3400 2000 4.7 10.0 × 16.0 × 18.5 B32632B2472+* 2000 2800 2000 6.8 12.0 × 17.5 × 18.5 B32632B2682+* 1800 2400 2000 3000 750 0.47 6.5 × 11.5 × 18.5 B32632B4471K* 4000 5200 4000 0.68 7.0 × 13.0 × 18.5 B32632B4681K* 3600 4800 4000 1.0 8.5 × 14.0 × 18.5 B32632B4102+* 3000 4000 2000 1.5 9.5 × 16.5 × 18.5 B32632B4152+* 2600 3400 2000 2.2 12.0 × 17.5 × 18.5 B32632B4222+*** 2000 2800 2000 B32632 Very high pulse (wound) Page 7 of 27Please read Cautions and warnings and Important notes at the end of this document.

Ordering codes and packing units (lead spacing 22.5 mm) VR V DC VRMS f ≤1 kHz V AC CR nF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./MOQ Untaped pcs./MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17 ±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 15 mm 17.5 mm 20 mm 25 mm Packaging code 055 060 070 080 630 300 22 6.5 × 12.0 × 27.0 B32633B6223+* 2200 3000 4000 33 7.0 × 14.0 × 27.0 B32633B6333+* 2000 2800 2000 47 7.5 × 14.5 × 27.0 B32633B6473+* 1800 2400 2000 68 9.0 × 16.0 × 27.0 B32633B6683+* 1400 2000 2000 100 10.5 × 18.5 × 27.0 B32633B6104+* 1200 1600 1000 1250 450 10 7.0 × 14.0 × 27.0 B32633B7103+* 2000 2800 2000 15 8.0 × 15.5 × 27.0 B32633B7153+* 1800 2400 2000 22 9.5 × 16.5 × 27.0 B32633B7223+* 1400 2000 2000 33 11.5 × 19.0 × 27.0 B32633B7333+* 1200 1600 1000 47 13.5 × 20.5 × 27.0 B32633B7473+* 1000 1400 1000 1600 450 3.3 6.5 × 12.5 × 27.0 B32633B1332+* 2000 2800 4000 4.7 6.5 × 12.5 × 27.0 B32633B1472+* 2000 2800 4000 6.8 7.0 × 14.5 × 27.0 B32633B1682+* 2000 2400 2000 10 8.0 × 15.5 × 27.0 B32633B1103+* 1800 2600 2000 15 9.5 × 17.0 × 27.0 B32633B1153+* 1400 2000 1000 22 11.5 × 19.0 × 27.0 B32633B1223+* 1200 1600 1000 33 14.5 × 22.0 × 27.0 B32633B1333+* 1000 1200 1000 2000 500 2.2 6.5 × 13.0 × 27.0 B32633B2222+* 2000 2800 4000 3.3 6.5 × 13.0 × 27.0 B32633B2332+* 2000 2800 4000 4.7 7.0 × 14.5 × 27.0 B32633B2472+* 2000 2800 2000 6.8 8.5 × 16.0 × 27.0 B32633B2682+* 1600 2200 2000 10 10.0 × 17.0 × 27.0 B32633B2103+* 1400 1800 1000 15 12.0 × 19.5 × 27.0 B32633B2153+* 1000 1400 1000 22 14.5 × 22.0 × 27.0 B32633B2223+*** 800 1200 1000 B32633 Very high pulse (wound) Page 8 of 27Please read Cautions and warnings and Important notes at the end of this document.

Ordering codes and packing units (lead spacing 22.5 mm) VR V DC VRMS f ≤1 kHz V AC CR nF Max. dimensions w × h × l mm Ordering code (composition see below) Ammo pack pcs./MOQ Reel pcs./MOQ Untaped pcs./MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: K = ±10% J = ±5% 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17 ±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 15 mm 17.5 mm 20 mm 25 mm Packaging code 055 060 070 080 2500 750 1.0 7.0 × 13.5 × 27.0 B32633B3102+* 1800 2600 4000 1.5 7.0 × 14.0 × 27.0 B32633B3152+* 1800 2600 4000 2.2 7.5 × 15.0 × 27.0 B32633B3222+* 1800 2400 2000 3.3 9.0 × 16.0 × 27.0 B32633B3332+* 1400 2000 2000 4.7 10.0 × 18.0 × 27.0 B32633B3472+* 1400 2000 2000 6.8 12.0 × 20.5 × 27.0 B32633B3682+* 1200 1600 1000 10 14.0 × 23.0 × 27.0 B32633B3103+* 1000 1400 1000 15 17.0 × 26.0 × 27.0 B32633B3153+* 800 1200 800 3000 750 1.0 6.5 × 12.0 × 27.0 B32633B4102+* 2600 3600 2000 1.5 7.5 × 13.5 × 27.0 B32633B4152+* 2200 3000 2000 2.2 8.5 × 15.0 × 27.0 B32633B4222+* 1800 2600 2000 3.3 10.0 × 17.0 × 27.0 B32633B4332+* 1600 2200 2000 4.7 11.5 × 19.0 × 27.0 B32633B4472+* 1200 1800 2000 6.8 13.0 × 22.0 × 27.0 B32633B4682+*** 1000 1400 800 B32633 Very high pulse (wound) Page 9 of 27Please read Cautions and warnings and Important notes at the end of this document.

Ordering codes and packing units (lead spacing 27.5 mm) VR V DC VRMS f ≤1 kHz V AC CR nF Max. dimensions w × h × l mm Ordering code (composition see below) Untaped pcs./MOQ MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: * = Packaging code: K = ±10% J = ±5% 010 = Untaped crimped (lead length 6 1 mm) 008 = Untaped straight (lead length 17 ±3 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Lead spacing (mm) 25 mm Packaging code 090 630 300 100 9.5 × 18.0 × 32.0 B32634B6104+* 1000 150 11.5 × 20.5 × 32.0 B32634B6154+* 800 220 13.5 × 22.5 × 32.0 B32634B6224+* 800 330 16.0 × 25.5 × 32.0 B32634B6334+* 600 1250 450 33 9.5 × 18.0 × 32.0 B32634B7333+* 1000 47 11.5 × 20.0 × 32.0 B32634B7473+* 1000 68 13.0 × 23.0 × 32.0 B32634B7683+* 800 100 16.0 × 26.0 × 32.0 B32634B7104+* 600 1600 450 15 8.5 × 17.0 × 32.0 B32634B1153+* 2000 22 10.0 × 18.5 × 32.0 B32634B1223+* 1000 33 12.0 × 21.5 × 32.0 B32634B1333+* 1000 47 14.0 × 22.5 × 32.0 B32634B1473+* 800 68 16.0 × 25.5 × 32.0 B32634B1683+* 600 2000 500 10 8.5 × 17.0 × 32.0 B32634A2103+* 2000 15 10.0 × 19.5 × 32.0 B32634A2153+* 1000 22 12.0 × 21.5 × 32.0 B32634A2223+* 1000 33 15.0 × 24.0 × 32.0 B32634A2333+* 800 B32634 Very high pulse (wound) Page 10 of 27Please read Cautions and warnings and Important notes at the end of this document.

Operating temperature range Max. operating temperature Top,max +110 °C Upper category temperature Tmax +100 °C Lower category temperature Tmin 55 °C Rated temperature TR +85 °C Dissipation factor tan δ 1.0 10-3 (at 10 kHz) at 20 °C 2.0 10-3 (at 100 kHz) (upper limit values) Insulation resistance Rins 100 GΩ at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage 2.0 VR, 2 s (B32632/3000 V DC: 1.2 VR, 2 s; B32633/3000 V DC: 1.6 VR, 2 s) Category voltage VC TA (°C) DC voltage derating AC voltage derating (continuous operation with VDC TA ≤ 85 VC = VR VC,RMS = VRMS or VAC at f ≤ 1 kHz) 85<TA≤100 VC = VR (165 TA)/80 VC,RMS = VRMS (165 TA)/80 Operating voltage Vop for TA (°C) DC voltage (max. hours) AC voltage (max. hours) short operating periods TA ≤ 85 Vop = 1.25 VC (2000 h) Vop = 1.0 VC,RMS (2000 h) (VDC or VAC at f ≤ 1 kHz) 85<TA≤100 Vop = 1.25 VC (1000 h) Vop = 1.0 VC,RMS (1000 h) Damp heat test 56 days/40 °C/93% relative humidity Limit values after damp Capacitance change ΔC/C ≤ 2% heat test Dissipation factor change Δ tan δ ≤ 1.0 10-3 (at 10 kHz) Insulation resistance Rins ≥ 50% of minimum as-delivered values Reliability: Failure rate λ 1 fit (≤ 2 10-9/h) at 0.5 VR, 40 °C Service life tSL 200 000 h at 1.0 VR, 85 °C For conversion to other operating conditions and temperatures, refer to chapter "Quality, 2 Reliability". Failure criteria: Total failure Short circuit or open circuit Failure due to variation Capacitance change ΔC/C > 10% of parameters Dissipation factor tan δ > 4 upper limit value Insulation resistance Rins < 1500 MΩ B32632 ... B32634 Very high pulse (wound) Page 11 of 27Please read Cautions and warnings and Important notes at the end of this document.

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing 15 mm 22.5 mm 27.5 mm VR VRMS V DC V AC dV/dt in V/µs 630 300 6 000 3 600 2 400 1250 450 14 400 8 400 5 400 1600 450 16 800 10 800 6 600 2000 500 20 400 14 400 8 400 2500 750 16 800 3000 750 21 600 18 000 k0 values Lead spacing 15 mm 22.5 mm 27.5 mm VR VRMS V DC V AC k0 in V2/µs 630 300 7 560 000 4 536 000 3 024 000 1250 450 36 000 000 21 000 000 13 500 000 1600 450 53 760 000 34 560 000 21 120 000 2000 500 81 600 000 57 600 000 33 600 000 2500 750 84 000 000 3000 750 129 600 000 108 000 000 B32632 ... B32634 Very high pulse (wound) Page 12 of 27Please read Cautions and warnings and Important notes at the end of this document.

Impedance Z versus frequency f (typical values) B32632 ... B32634 Very high pulse (wound) Page 13 of 27Please read Cautions and warnings and Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm

630 V DC/300 V AC 1250 V DC/450 V AC

1600 V DC/450 V AC 2000 V DC/500 V AC

Very high pulse (wound) Page 14 of 27Please read Cautions and warnings and Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm

3000 V DC/750 V AC

Very high pulse (wound) Page 15 of 27Please read Cautions and warnings and Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm Very high pulse (wound) Page 16 of 27Please read Cautions and warnings and Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm

2500 V DC/750 V AC 3000 V DC/750 V AC

Very high pulse (wound) Page 17 of 27Please read Cautions and warnings and Important notes at the end of this document.

Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C) For TA >90 °C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm Very high pulse (wound) Page 18 of 27Please read Cautions and warnings and Important notes at the end of this document.

1 Soldering

1.1 Solderability of leads

The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/ 0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Wetting of wire surface by new solder ≥90%, free-flowing solder

1.2 Resistance to soldering heat

Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) coated uncoated (lead spacing > 10 mm) 260 ±5 °C 10 ±1 s MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) 5 ±1 s MKP MKT (lead spacing ≤ 7.5 mm) uncoated (lead spacing ≤ 10 mm) insulated (B32559) < 4 s recommended soldering profile for MKT uncoated (lead spacing ≤ 10 mm) and insulated (B32559) B32632 ... B32634 Very high pulse (wound) Page 19 of 27Please read Cautions and warnings and Important notes at the end of this document.

Immersion depth 2.0 +0/ 0.5 mm from capacitor body or seating plane Shield Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor body and liquid solder Evaluation criteria: Visual inspection No visible damage ΔC/C0 2% for MKT/MKP/MFP 5% for EMI suppression capacitors tan δ As specified in sectional specification B32632 ... B32634 Very high pulse (wound) Page 20 of 27Please read Cautions and warnings and Important notes at the end of this document.

1.3 General notes on soldering

Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate- gory temperature T max. Long exposure to temperatures above this type-related temperature limit can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical characteristics. For short exposures (as in practical soldering processes) the heat load (and thus the possible effects on a capacitor) will also depend on other factors like: Pre-heating temperature and time Forced cooling immediately after soldering Terminal characteristics: diameter, length, thermal resistance, special configurations (e.g. crimping) Height of capacitor above solder bath Shadowing by neighboring components Additional heating due to heat dissipation by neighboring components Use of solder-resist coatings The overheating associated with some of these factors can usually be reduced by suitable coun- termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced cooling process may possibly have to be included. EPCOS recommends the following conditions: Pre-heating with a maximum temperature of 110 °C Temperature inside the capacitor should not exceed the following limits: MKP/MFP 110 °C MKT 160 °C When SMD components are used together with leaded ones, the leaded film capacitors should not pass into the SMD adhesive curing oven. The leaded components should be assembled af- ter the SMD curing step. Leaded film capacitors are not suitable for reflow soldering. Uncoated capacitors For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea- sures are recommended: pre-heating to not more than 110 °C in the preheater phase rapid cooling after soldering B32632 ... B32634 Very high pulse (wound) Page 21 of 27Please read Cautions and warnings and Important notes at the end of this document.

Do not exceed the upper category temperature (UCT). Do not apply any mechanical stress to the capacitor terminals. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after it has been soldered to the PC board. Do not pick up the PC board by the soldered capacitor. Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified lead spacing. Do not exceed the specified time or temperature limits during soldering. Avoid external energy inputs, such as fire or electricity. Avoid overload of the capacitors. The table below summarizes the safety instructions that must always be observed. A detailed de- scription can be found in the relevant sections of the chapters "General technical information" and "Mounting guidelines". Topic Safety information Reference chapter "General technical information" Storage conditions Make sure that capacitors are stored within the specified range of time, temperature and humidity conditions. 4.5 "Storage conditions" Flammability Avoid external energy, such as fire or electricity (passive flammability), avoid overload of the capacitors (active flammability) and consider the flammability of materials. 5.3 "Flammability" Resistance to vibration Do not exceed the tested ability to withstand vibration. The capacitors are tested to IEC 60068-2-6. EPCOS offers film capacitors specially designed for operation under more severe vibration regimes such as those found in automotive applications. Consult our catalog "Film Capacitors for Automotive Electronics". 5.2 "Resistance to vibration" B32632 ... B32634 Very high pulse (wound) Page 22 of 27Please read Cautions and warnings and Important notes at the end of this document.

Topic Safety information Reference chapter "Mounting guidelines" Soldering Do not exceed the specified time or temperature limits during soldering. 1 "Soldering" Cleaning Use only suitable solvents for cleaning capacitors. 2 "Cleaning" Embedding of capacitors in finished assemblies When embedding finished circuit assemblies in plastic resins, chemical and thermal influences must be taken into account. Caution: Consult us first, if you also wish to embed other uncoated component types! 3 "Embedding of capacitors in finished assemblies" B32632 ... B32634 Very high pulse (wound) Page 23 of 27Please read Cautions and warnings and Important notes at the end of this document.

α Heat transfer coefficient Wärmeübergangszahl α C Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität A Capacitor surface area Kondensatoroberfläche βC Humidity coefficient of capacitance Feuchtekoeffizient der Kapazität C Capacitance Kapazität CR Rated capacitance Nennkapazität ΔC Absolute capacitance change Absolute Kapazitätsänderung ΔC/C Relative capacitance change (relative deviation of actual value) Relative Kapazitätsänderung (relative Abweichung vom Ist-Wert) ΔC/CR Capacitance tolerance (relative deviation from rated capacitance) Kapazitätstoleranz (relative Abweichung vom Nennwert) dt Time differential Differentielle Zeit Δt Time interval Zeitintervall ΔT Absolute temperature change (self-heating) Absolute Temperaturänderung (Selbsterwärmung) Δtan δ Absolute change of dissipation factor Absolute Änderung des Verlustfaktors ΔV Absolute voltage change Absolute Spannungsänderung dV/dt Time differential of voltage function (rate of voltage rise) Differentielle Spannungsänderung (Spannungsflankensteilheit) ΔV/Δt Voltage change per time interval Spannungsänderung pro Zeitintervall E Activation energy for diffusion Aktivierungsenergie zur Diffusion ESL Self-inductance Eigeninduktivität ESR Equivalent series resistance Ersatz-Serienwiderstand f Frequency Frequenz f1 Frequency limit for reducing permissible AC voltage due to thermal limits Grenzfrequenz für thermisch bedingte Reduzierung der zulässigen Wechselspannung f2 Frequency limit for reducing permissible AC voltage due to current limit Grenzfrequenz für strombedingte Reduzierung der zulässigen Wechselspannung fr Resonant frequency Resonanzfrequenz FD Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur Diffusion FT Derating factor Deratingfaktor i Current (peak) Stromspitze IC Category current (max. continuous current) Kategoriestrom (max. Dauerstrom) B32632 ... B32634 Very high pulse (wound) Page 24 of 27Please read Cautions and warnings and Important notes at the end of this document.

IRMS (Sinusoidal) alternating current, root-mean-square value (Sinusförmiger) Wechselstrom iz Capacitance drift Inkonstanz der Kapazität k0 Pulse characteristic Impulskennwert LS Series inductance Serieninduktivität λ Failure rate Ausfallrate λ0 Constant failure rate during useful service life Konstante Ausfallrate in der Nutzungsphase λtest Failure rate, determined by tests Experimentell ermittelte Ausfallrate Pdiss Dissipated power Abgegebene Verlustleistung Pgen Generated power Erzeugte Verlustleistung Q Heat energy Wärmeenergie ρ Density of water vapor in air Dichte von Wasserdampf in Luft R Universal molar constant for gases Allg. Molarkonstante für Gas R Ohmic resistance of discharge circuit Ohmscher Widerstand des Entladekreises Ri Internal resistance Innenwiderstand Rins Insulation resistance Isolationswiderstand RP Parallel resistance Parallelwiderstand RS Series resistance Serienwiderstand S severity (humidity test) Schärfegrad (Feuchtetest) t Time Zeit T Temperature Temperatur τ Time constant Zeitkonstante tan δ Dissipation factor Verlustfaktor tan δD Dielectric component of dissipation factor Dielektrischer Anteil des Verlustfaktors tan δP Parallel component of dissipation factor Parallelanteil des Verlfustfaktors tan δS Series component of dissipation factor Serienanteil des Verlustfaktors TA Ambient temperature Umgebungstemperatur Tmax Upper category temperature Obere Kategorietemperatur Tmin Lower category temperature Untere Kategorietemperatur tOL Operating life at operating temperature and voltage Betriebszeit bei Betriebstemperatur und -spannung Top Operating temperature Beriebstemperatur TR Rated temperature Nenntemperatur Tref Reference temperature Referenztemperatur tSL Reference service life Referenz-Lebensdauer VAC AC voltage Wechselspannung B32632 ... B32634 Very high pulse (wound) Page 25 of 27Please read Cautions and warnings and Important notes at the end of this document.

VC Category voltage Kategoriespannung VC,RMS Category AC voltage (Sinusförmige) Kategorie-Wechselspannung VCD Corona-discharge onset voltage Teilentlade-Einsatzspannung Vch Charging voltage Ladespannung VDC DC voltage Gleichspannung VFB Fly-back capacitor voltage Spannung (Flyback) Vi Input voltage Eingangsspannung Vo Output voltage Ausgangssspannung Vop Operating voltage Betriebsspannung Vp Peak pulse voltage Impuls-Spitzenspannung Vpp Peak-to-peak voltage Impedance Spannungshub VR Rated voltage Nennspannung R Amplitude of rated AC voltage Amplitude der Nenn-Wechselspannung VRMS (Sinusoidal) alternating voltage, root-mean-square value (Sinusförmige) Wechselspannung VSC S-correction voltage Spannung bei Anwendung "S-correction" Vsn Snubber capacitor voltage Spannung bei Anwendung "Beschaltung" Z Impedance Scheinwiderstand Lead spacing Rastermaß B32632 ... B32634 Very high pulse (wound) Page 26 of 27Please read Cautions and warnings and Important notes at the end of this document.

The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application . These statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incum- bent on the customer to check and decide whether an EPCOS product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Ma- terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de- tailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "General Terms of Delivery for Products and Services in the Electrical In- dustry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Important notes Page 27 of 27