MOC7811 MOTOROLA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
OPTOELECTRONICS — (continued) CGouplers/interrupters Slotted Couplers/Interrupter Modules Slotted couplers consist of an infrared emitting diode facing Style 1: a photodetector in a molded plastic housing. A slot in the housing Pin 1. Cathode between the emitter and the detector provides a means of in- 2. Collector terrupting the signal. A wide selection of standard and custom 3. Anode housings and detector functions is available. All IREDs and pho- 4. Emitter todetectors in the miniature Case 349 (see Silicon Photodetec- 3 1 4% Boe ‘ 2 tors) can be used in these housings. CASE 354 CASE 354A Transistor Output (V(BR)CEO = 30 V) Current Transfer ton: toft” Ratio (CTR) Voe(sat) Typ Ve VcE Volts @ 'F Ic Volts @ IF Volts Max mA mA BS Max mA Moc7611 0.4 18 12/60 2.5K 18 354A MOc7812 0.4 18 12/60 2.5K 18 Style 1 Moc7813 0.4 18 12/60 2.5K 18 moc7621 0.4 18 12/60 5.0 2.5K 18 354 MOC7822 0.4 18 12/60 5.0 2.5K 18 Style 1 MOC7823 0.4 18 12/60 5.0 2.5K 18 Fiber Optic Devices Case 209-02 Case 210A-01 Motorola offers high performance Infrared Emitters and De- Style 1: TO-206AC tectors for fiber optic systems. Devices are available for systems Pin 1. Anode (70-82) requiring greater than 100 MHz analog bandwidth over several <> 2. Cathode — Style 1: kilometers or requiring very low cost with up to 10 MHz band- G 7 Pin 1. Anode width over short distances. © 2. Cathode The packages fit directly into standard fiber optic connector Mis 7 Wy 3. Case systems. All devices are spectrally matched to minimum atten- Yy . uation regions of most fiber optic cables. i} ~ The Fiber Optic Low Cost System (FLCS) package houses 12 ~ infrared emitters and detectors and has a molded lens which FLCS Ni efficiently couples the light to and from the cable. The package CASE 363-01 ~ is complete with the fiber alignment and locking mechanism and Style 1: Style 2: Style 3: the means for attaching to a board. Pin 1. Anode Pin 1. Emitter Pin 1. Cathode 2. Cathode 2. Collector 2. Anode Infrared Emitters Designed as infrared sources for fiber optic systems. MFOE200 is compatible with AMP #227015; MFOE1200, MFOE1201 and MFOE1202 are compatible with AMP #228756-1 and Amphenol #905-138-5001 receptacles. Total Power Output ton’tott x mw ns am Typ @ Ig mA Typ Typ MFOE71 363-01 Style 1 (FLCS) 209-02 Style 1 MFOE1200 100 (>70 MHz bw) 820 210A-01 MFOE1201 100 (>100 MHz bw) 820 Style 1 MFOE1202 100 (>100 MHz bw) 820 MOTOROLA EUROPEAN MASTER SELECTION GUIDE 3-132