MFLA Eaton-All-Rights-Reserved
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
SMD current sensing resistor- metal film Pb HALOGEN HFFREE T able 1. Part numbering configuration scheme MFL @ xxxx Rxxxx * ? Family name MFL Grade option A = Automotive grade Footprint EIA option 0805, 1206, 2010, 2512 Resistance option Rxxxx = xxx.x mΩ ex: R1000 = 100.0 mΩ Power rating option 3/4 W, C = 1 W Resistance tolerance option F = ±1% Product features
- Low sensing resistance
- 0805 (2012 metric) to 2512 (6432 metric)
- High power dissipation
- AEC-Q200 compliant
- Moisture sensitivity level (MSL): 1
Applications
- Switched-mode power supply (SMPS)
- Voltage regulator module
- Power management
- Stepper motor drives Environmental compliance See electrical specification table for option details
SMD current sensing resistor- metal film www.eaton.com/electronics Mechanical parameters- Inches [mm] Recommended PCB layout Family Size code L W C d t MFLA0805 0805 [2012] 0.079 ± 0.004 [2.00 ± 0.10] 0.049 ± 0.004 [1.25 ± 0.10] 0.016 ± 0.008 [0.40 ± 0.20] 0.014 ± 0.008 [0.35 ± 0.20] 0.020 ± 0.004 [0.50 ± 0.10] MFLA1206 1206 [3216] 0.122 ± 0.008 [3.10 ± 0.20] 0.061 ± 0.004 [1.55 ± 0.10] 0.020 ± 0.012 [0.50 ± 0.30] 0.016 ± 0.008 [0.40 ± 0.20] 0.022 ± 0.004 [0.55 ± 0.10] MFLA2010 2010 [5025] 0.197 ± 0.008 [5.00 ± 0.20] 0.098 ± 0.008 [2.50 ± 0.20] 0.024 ± 0.012 [0.60 ± 0.30] 0.020 ± 0.010 [0.50 ± 0.25] 0.022 ± 0.004 [0.55 ± 0.10] MFLA2512 2512 [6432] 0.248 ± 0.008 [6.30 ± 0.20] 0.126 ± 0.008 [3.20 ± 0.20] 0.024 ± 0.012 [0.60 ± 0.30] 0.020 ± 0.010 [0.50 ± 0.25] 0.022 ± 0.004 [0.55 ± 0.10] Construction Series a b L MFLA0805 1.55 1.15 1.2 MFLA1206 1.85 1.20 2.2 MFLA2010 2.80 1.55 3.5 MFLA2512 3.50 1.75 4.0 1. The copper foil minimum thickness of PCB needs 3 oz. 2. PCB layout dimension tolerance is +/-0.1 mm. 3. The resistance will change slightly after soldered; it is dependent on PCB pad size deign and it’s necessary to consider the effect of the resistance increase or decrease. Part marking Family Marking MFLA0805 Rxxx: (xxx= resistance value in ohms expressed in 3 digits R100 = 0.100 Ω or 100 mΩ MFLA1206 MFLA2010 MFLA2512
SMD current sensing resistor- metal film www.eaton.com/electronics Electrical specifications Part number Size Grade option Resistance value mΩ (Part number code) Resistance tolerance (Part number code) Power rating (Part number code) TCR (ppm/°C) Operating temperature MFL@0805Rxxxx*? 0805 (2012 metric) A 100 (1000) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 110 (1100) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 120 (1200) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 130 (1300) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 140 (1400) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 150 (1500) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 160 (1600) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 180 (1800) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 200 (2000) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 220 (2200) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 240 (2400) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 250 (2500) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 255 (2550) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 270 (2700) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 280 (2800) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 300 (3000) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 330 (3300) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 360 (3600) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 390 (3900) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 400 (4000) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 430 (4300) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 470 (4700) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 500 (5000) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 510 (5100) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 560 (5600) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 620 (6200) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 680 (6800) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 750 (7500) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 820 (8200) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@0805Rxxxx*? 0805 (2012 metric) A 910 (9100) ±1% (F) 1/4 W (A) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 100 (1000) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 110 (1100) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 120 (1200) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 130 (1300) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 140 (1400) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 150 (1500) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 160 (1600) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 180 (1800) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 200 (2000) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 220 (2200) ±1% (F) 1/2 W (S) ± 200 -55 °C to +155 °C @= Enter grade option code from table above (A=Automotive) Rxxxx = Enter resistance code option from table above xxxx= resistance code (xxx.x mΩ ex: R1000 = 100.0 mΩ) *= Enter resistance tolerance code option from table above (F= ±1%) ?= Enter power rating code option from table above (A = 1/4 W, S = 1/2 W, I = 3/4 W, C = 1 W)
SMD current sensing resistor- metal film www.eaton.com/electronicsElectrical specifications Part number Size Grade option Resistance value mΩ (Part number code) Resistance tolerance (Part number code) Power rating (Part number code) TCR (ppm/°C) Operating temperature MFL@1206Rxxxx*? 1206 (3216 metric) A 240 (2400) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 250 (2500) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 270 (2700) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 280 (2800) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 300 (3000) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 330 (3300) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 340 (3400) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 360 (3600) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 390 (3900) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 400 (4000) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 420 (4200) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 430 (4300) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 470 (4700) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 500 (5000) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 510 (5100) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 560 (5600) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 600 (6000) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 620 (6200) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 680 (6800) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 710 (7100) ±1% (F) 1/2 (S) ± 200 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 750 (7500) ±1% (F) 1/2 (S) ± 100 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 820 (8200) ±1% (F) 1/2 (S) ± 100 -55 °C to +155 °C MFL@1206Rxxxx*? 1206 (3216 metric) A 910 (9100) ±1% (F) 1/2 (S) ± 100 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 100 (1000) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 120 (1200) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 130 (1300) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 150 (1500) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 160 (1600) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 180 (1800) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 200 (2000) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 220 (2200) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 240 (2400) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 250 (2500) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 270 (2700) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 300 (3000) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 330 (3300) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 360 (3600) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 390 (3900) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 400 (4000) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 430 (4300) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 470 (4700) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 500 (5000) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C @= Enter grade option code from table above (A=Automotive) Rxxxx = Enter resistance code option from table above xxxx= resistance code (xxx.x mΩ ex: R1000 = 100.0 mΩ) *= Enter resistance tolerance code option from table above (F= ±1%) ?= Enter power rating code option from table above (A = 1/4 W, S = 1/2 W, I = 3/4 W, C = 1 W)
SMD current sensing resistor- metal film www.eaton.com/electronics Electrical specifications Part number Size Grade option Resistance value mΩ (Part number code) Resistance tolerance (Part number code) Power rating (Part number code) TCR (ppm/°C) Operating temperature MFL@2010Rxxxx*? 2010 (5025 metric) A 510 (5100) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 560 (5600) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 620 (6200) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 680 (6800) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 750 (7500) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 820 (8200) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2010Rxxxx*? 2010 (5025 metric) A 910 (9100) ±1% (F) 3/4 W (I) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 100 (1000) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 110 (1100) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 120 (1200) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 130 (1300) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 140 (1400) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 150 (1500) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 160 (1600) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 170 (1700) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 180 (1800) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 200 (2000) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 220 (2200) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 240 (2400) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 250 (2500) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 270 (2700) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 280 (2800) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 300 (3000) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 330 (3300) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 360 (3600) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 390 (3900) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 400 (4000) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 420 (4200) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 430 (4300) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 470 (4700) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 500 (5000) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 510 (5100) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 560 (5600) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 600 (6000) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 620 (6200) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 680 (6800) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 750 (7500) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 800 (8000) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 820 (8200) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C MFL@2512Rxxxx*? 2512 (6432 metric) A 910 (9100) ±1% (F) 1 W (C) ± 200 -55 °C to +155 °C @= Enter grade option code from table above (A=Automotive) Rxxxx = Enter resistance code option from table above xxxx= resistance code (xxx.x mΩ ex: R1000 = 100.0 mΩ) *= Enter resistance tolerance code option from table above (F= ±1%) ?= Enter power rating code option from table above (A = 1/4 W, S = 1/2 W, I = 3/4 W, C = 1 W)
SMD current sensing resistor- metal film www.eaton.com/electronics Packaging information- mm Supplied in tape and reel on a 7 .0” diameter reel (EIA-481 compliant) T ape carrier and dimensions Reel dimensions Dimension 0805 1206 2010 2512 Size A B C D N W1 W2 W3 Size Tape Quantity 0805 7 inch paper 5K 1206 7 inch paper 5K 2010 7 inch embossed 4K 2512 7 inch embossed 4K
SMD current sensing resistor- metal film www.eaton.com/electronics General specifications Temperature coefficient of resistance: IEC60115-1 4.8, +25 to +125 °C Short time overload: IEC60115-1 4.13, 2.5 X rated power for 5 s High temperature exposure (storage): AEC-Q200-REV D-Test 3, MIL-STD202 Method 108, 1000 hours, +125 °C Temperature cycling: AEC-Q200-REV D-Test 4, JESD22 Method JA-104, 1000 Cycles (-55 °C to +125 °C) Moisture resistance: AEC-Q200-REV D-Test 6 , MIL-STD-202 Method 106, T=24 hours / Cycle ,10 Cycles, Notes: Steps 7a& 7b not required. Unpowered, < ±1% Biased humidity: AEC-Q200-REV D-Test 7, MIL-STD-202 Method 103, 1000 hours +85 °C/85% RH. Note: Specified conditions: 10% of operating power (not exceeding max working voltage). Operational life: AEC-Q200-REV D-Test 8, MIL-STD-202 Method 108, 1000 hours, +125 °C at 35% rated power Resistance to solvents: AEC-Q200-REV D-Test 12, MIL-STD-202 Method 215, a: Isopropyl Alcohol : Mineral Spirits= 1 : 3, b: Terpene Defluxer (Bioact EC-7R) c: Deionized water : Propylene Glycol Monomethyl Ether : monoethanolamine = 42 : 1 : 1, Marking and protective layer cannot be detached Mechanical shock: AEC-Q200-REV D-Test 13, MIL-STD-202 Method 213, Wave Form Peak value is 100 g’s. 6 ms Vibration: AEC-Q200-REV D-Test 14, MIL-STD-202 Method 204, 5 g’s for 20 min., 12 cycles each of 3 orientations Resistance to soldering heat: AEC-Q200-REV D-Test 15, MIL-STD-202 Method 210, Condition B : Immerse the specimens in and eutectic solder at +260 ± 5 °C for 10 ± 1 s Thermal shock: AEC-Q200-REV D-Test 16, MIL-STD-202 Method 107, -55 °C/+155 °C. Note: Number of cycles required 300, Maximum transfer time 20 seconds, Dwell time 15 minutes. Air-Air. < ±1.0% ESD: AEC-Q200-REV D-Test 17, AEC-Q200-002 or ISO/DIS 10605, verify the voltage setting at 500 V, < ±1.0% Solderability: AEC-Q200-REV D-Test 18, J-STD-002, Method B, aging 4 hours at 155 °C dry heat Lead-free solder bath at 235 ± 3 °C, Dipping time: 3 ± 0.5 seconds, > 95% area covered with tin Flammability: AEC-Q200-REV D-Test 20, UL-94, V-0 or V-1 are acceptable. Electrical test not required. V-0 or V-1 Board flex (bending): AEC-Q200-REV D-Test 21, AEC-Q200-005, The duration of the applied forces shall be 60 (+ 5) Sec, 2 mm deflection. < ±1.0% Terminal strength (SMD): AEC-Q200-REV D-Test 22, AEC-Q200-006, Force of 1.0 kg for 60 seconds, Remarks : 0201-NA, < ±1.0% T emperature derating curve Rated power in % T emperature (°C) Rated current & voltage The rated Current and Voltage are calculated by the following formula: I: Rated current (A) P: Rated power (W) V: Rated voltage (V) R: Resistance value (Ω)
1000 Eaton Boulevard
Cleveland, OH 44122 United States Eaton.com/electronics © 2022 Eaton All Rights Reserved Printed in USA Publication No. ELX1182 BU-ELX22042 June 2022 MFLA SMD current sensing resistor- metal film Technical Data ELX1 182 Effective June 2022 Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton is a registered trademark. All other trademarks are property of their respective owners. Follow us on social media to get the latest product and support information. Temperature t tP ts TC -5°C Time 25°C to Peak Time 25°C Tsmin Tsmax TL TP Preheat A Max. Ramp Up Rate = 3°C/s Max. Ramp Down Rate = 6°C/s Profile feature Lead (Pb) free solder Preheat and soak • Temperature min. (Tsmin) 150 °C
- Temperature max. (Tsmax) 200 °C
- Time (Tsmin to Tsmax) (ts) 60-150 seconds Ramp up rate TL to Tp 3 °C/ second max. Liquidous temperature (Tl) Time (tL) maintained above TL 217 °C 60-120 seconds Peak package body temperature (TP)* 260 °C Time (tp)* within 5 °C of the specified classification temperature (T c) 10 seconds* Ramp-down rate (Tp to TL) 6 °C/ second max. Time 25 °C to peak temperature 8 minutes max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. Manual solder +350 °C ±10 °C , 3 +1/-0 seconds 1 time (by soldering iron), generally manual, hand soldering is not recommended Solder reflow profile