MF17B-WPS01-0400

MF14B-WRF01-0200 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

EnvironmentAttenuatorsTerminators Harsh Environment Fiber Optic Connectors MF 14 and MF 17 Series I Features 1. 2 Fibers (MF14 series), 4 Fibers (MF17 series), or Optical/Electrical Hybrids are available. 6 fibers (MF22 series) available. 2. Incorrect Insertion Prevention. Guide key (plug) and key slot (receptacle) are designed for prevent incorrect insertion. 3. Plug, receptacle fully mated condition satisfy IP67 wateroof Performance. 4. For more than 10 years, MF series has been designed and installed in many harsh environmental applications. Please contact us if you have any requests. HIROSE will offer excellent solutions to meet your requirements. I Applications Outdoor optical transmission systems, LAN, CATV, ATM, Base station, industrial optical/electric lines.

EnvironmentAttenuatorsTerminators Optical characteristics Mechanical characteristics Environmental characteristics Part Material Plug and Receptacle Housing Aluminum alloy Ferrule case Synthetic resin Strain relief Zinc alloy Protective cap and clamp Brass Rubber boot and O-rings Synthetic rubber Screws, springs, and steel wire Stainless steel Washer Brass Split sleeve Zirconia or Copper alloy I Product Specifications Ratings Operating temperature range Note: Insertion loss herein means only connection loss. -25°C to +70°C Storage temperature range -25°C to +70°C I Materials Item Test Method Specifications Insertion Loss Wavelength 1310nm (LD) 1.0dB max. (Note) Durability 100 times(cycles, mating/un-mating) Vibration Shock Humidity -10°C to 65°C, humidity: 90% to 96% 10 cycles(Temperature/ humidity- cycles) Change of temperature -40°C to +75°C 42 cycles Dry heat 960 hours at 85°C Cold 960 hours at -40°C Salt Mist 1000 hours in a 5% concentration of salt mist No visible corrosion. Waterproof Inside air pressure 4.90kPa for one minute No air bubble leakege, IP67 Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, acceleration of 98.1m/s2, 2 hours in each of the 2 axis. Acceleration of 981 m/s2, 6 ms duration, sine half- wave waveform, 3 cycles in each of the 2 axis. 1) Insertion loss fluctuation after test: 0.3dB max. 2) No visible damage, dislocation of clamp or cable. 1) Insertion loss fluctuation after (test) : 0.3dB max. 2) No visible damage, dislocation of clamp or cable. I Important Notice 1. Please ask HIROSE when you assemble the MF connectors for special cables. Some cables can not be used for the connectors. 2. MF series use SC/PC zirconia ferrules. Please see page 33.

EnvironmentAttenuatorsTerminators * indicates cable diameter. 8, 9 and 10mm, diameter cables are appicable. I Bayonet lock G Plug Housing ØAØD E BC Number of Fibers ØA B C ØD E 184.7 116.5 Part Number MF14B-WP *S01-0200 MF17B-WP *S01-0400 Note: Up to 3 mm cables are applicable. G Square Flange Receptacle Housing ØF G Ø D Ø3.3 M E A C Number of Fibers MA B C ØD ME ØF G 45.5 51.5 20.5 25.5 18.7 18.7 Part Number MF14B-WRF01-0200 MF17B-WRF01-0400 Note: Up to 3 mm cables are applicable. G Bulk Head Receptacle Housing ØD ØF G A C E HEX Number of Fibers MA B C ØD ME ØF G 17.5 17.5 45.5 51.5 20.5 25.5 18.7 18.7 Part Number MF14B-WRB01-0200 MF17B-WRB01-0400

EnvironmentAttenuatorsTerminators I Threaded lock G Plug housing ØD E ØA B C F Note: Up to 3 mm cables are applicable. G Square Flange Receptacle Housing H ØD ØG±0.3 4-Ø3.3 EMF M A C Part Number MA B C ØD E MF ØG H 45.5 51.5 20.5 25.5 M20 ∞1 M22 ∞1 18.5 18.5 Part Number MF14S-WRF01-0200 MF17S-WRF01-0400 Note: Up to 3 mm cables are applicable. G Bulk Head Receptacle Housing H ØD ØG EA C F HEX Part Number MA B C ØD E MF ØG H 17.5 17.5 45.5 51.5 20.5 25.5 M20 ∞1 M22 ∞1 18.5 18.5 Part Number MF14S-WRB01-0200 MF17S-WRB01-0400 *indicates the cable diameter. 8, 9 and 10mm, diameter cables are applicable. Number of Fibers ØA B C ØD E F 184.7 116.5 20.8 20.8 M20 ∞1 M22 ∞1 Part Number MF14S-WP *S01-0200 MF17S-WP *S01-0400

EnvironmentAttenuatorsTerminators BPanel cut-out G Square Flange Receptacle ØA MB 4-Ø3.3 B ØA G Bulk Head Receptacle A B Part Number MF14B-WRF01-0200 MF14S-WRF01-0200 MF17B-WRF01-0400 MF17S-WRF01-0400 A B 22.2 24.2 24.2 24.2 21.2 23.2 23.2 23.2 Part Number MF14B-WRB01-0200 MF14S-WRB01-0200 MF17B-WRB01-0400 MF17S-WRB01-0400 Panel thickness: 2mm to 4.5mm Panel thickness: 2mm to 4.5mm

EnvironmentAttenuatorsTerminators Harsh Environment Fiber Optic Connector MF22 Series Guide key slot Guide key Receptacles Plugs I Features 1. 6 Fibers or Optical /Electric Hybrids are available 2 fibers (MF14), 4fibers (MF17) available. Please contact us if you have any requests. HIROSE will offer excellent solutions to meet your requirements. 2. Incorrect Insertion Prevention Five guide keys positioned at specific angles assure that the connector will mate only with the corresponding assembly. 3. Plug, receptacle fully mated condition satisfy IP67 waterproof performance. 4. Harsh environment applications The connector’s outer surfaces are covered with heat baked hard coating and all internal connections are protected by seals. 5. Cable Termination The connector will terminate with a majority of cables having outside diameter from 7mm to 12mm. Please contact Hirose for other applicable cable. I Applications Outdoor optical transmission systems, LAN, CATV, ATM, and other applications requiring environmentally protected optical or electrical connections.

Insertion Loss Wavelength 850nm (LD) 0.7dB max. (Note) Durability 500 times(cycles, mating/un-mating) Vibration Shock Humidity -10°C to 65°C, humidity: 90% to 96% 10 cycles(Temperature/ humidity- cycles) Change of temperatice -40°C / +75°C 42 cycles Dry heat 336 hours at 85°C Cold 240 hours at -40°C Salt mist 1000 hours in a 5% concentration of salt mist No visible corrosion. Waterproof Inside air pressure 4.90kPa for one minute No air bubble leakege, IP67 MUSCFCHarsh EnvironmentAttenuatorsTerminators Optical characteristics Mechanical characteristics Environmental characteristics Part Material Plug and Receptacle Housing Aluminum alloy Ferrule case Synthetic resin Strain relief components Zinc alloy Protective cap and clamp Synthetic resin Rubber boot and O-rings Synthetic rubber Screws, springs, and ball chain Stainless steel Washer Brass Split sleeve Zirconia or Copper alloy I Product Specifications Ratings Operating temperature range Note: Insertion loss herein means only connection loss. -40°C to +75°C Storage temperature range -40°C to +85°C I Materials Item Test Method Specifications Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, acceleration of 98.1m/s2, 2 hours in each of the 2 axis. Acceleration of 981 m/s2, 6 ms duration, sine half- wave waveform, 3 cycles in each of the 2 axis. 1) Insertion loss fluctuation after test: 0.3dB max. 2) No visible damage, dislocation of clamp or cable. 1) Insertion loss fluctuation (after test): 0.3dB max. 2) No visible damage, dislocation of clamp or cable. I Important Notice 1. Please ask HIROSE when you assemble the MF connectors for special cables. Some cables can not be used for the connectors. 2. MF series use SC/PC zirconia ferrules. Please see page 33.

EnvironmentAttenuatorsTerminators *indicates cable diameter. G Plug housing 121 126 Tr30∞2 Ø34 Ø32 Tr30∞2

42 HEX

Ø45 32.35 33+0.5 Ø34+0.5 I Threaded lock Part Number Number of Fibers MF22S-WDP *S01-0600 6 Note: Up to 3 mm cables are applicable. G Bulk head receptacle housing Part Number Number of Fibers MF22S-WDRB01-0600 6 BPanel cut-out Panel thickness: 1mm to 4mm

EnvironmentAttenuatorsTerminators G Plug assembly tool I Tools Part Number CL No. MF22S-T2 709-0065-0 Part Number CL No. HSC-T3 704-0287-0 G Crimp tool for receptacle assembly