METSEPM2110 SCHNEIDER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

EasyLogic PM2110, Power & Energy meter, Total Harmonic, LED, Pulse, class 1 Main Range EasyLogic Product name EasyLogic PM2100 Device short name PM2110 Product or component type Power meter Complementary Device application Power monitoring Sub billing Power quality analysis total harmonic distortion Type of measurement Total current harmonic distortion THD (I) per phase Total voltage harmonic distortion THD (U) per phase Apparent energy total Active and reactive energy total Apparent power total Active and reactive power total Current average Voltage average Frequency average Power factor average Metering type Peak demand power PM, QM, SM Apparent power S, S1, S2, S3 Current I, I1, I2, I3 Reactive power Q, Q1, Q2, Q3 Calculated neutral current Voltage U, U21, U32, U13, V, V1, V2, V3 Peak demand currents Unbalance current Demand power P, Q, S Active power P, P1, P2, P3 Active, reactive, apparent energy (signed, four quadrant) Accuracy class Class 1 active energy conforming to IEC 62053-21 Class 1 reactive energy conforming to IEC 62053-24 Measurement accuracy Apparent power +/- 1 % Active energy +/- 1 % Reactive energy +/- 1 % Active power +/- 1 % Voltage +/- 0.5 % Power factor +/- 0.01 Current +/- 0.5 % Frequency +/- 0.05 % Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Mar 29, 2020

Measurement current 5…6000 mA Measurement voltage 35…480 V AC 50/60 Hz between phases 20…277 V AC 50/60 Hz between phase and neutral 480…999000 V AC 50/60 Hz with external VT Frequency measurement range 45…65 Hz Network frequency 60 Hz 50 Hz Ride-through time 100 ms 120 V AC typical 400 ms 230 V AC typical 50 ms 125 V DC typical [In] rated current 5 A 1 A Maximum power consumption in VA 6 VA at 277 V AC Maximum power consumption in W 3.3 W (power lines (AC))

2 W at 277 V (power lines (DC))

Input impedance Current (impedance <= 0.3 mOhm) Voltage (impedance > 5 MOhm) Tamperproof of settings Protected by access code Display type 7 segments LED Display colour Red Messages display capacity 3 fields of 4 characters Display digits 12 digit(s) - 14.2 mm in height Demand intervals Configurable from 1 to 60 min Information displayed Demand current (past value) Demand current (present value) Demand power (past value) Demand power (present value) Voltage Current Frequency Energy consumption Harmonic distortion Power factor Active power Apparent power Reactive power Unbalanced in % Control type 3 x button Local signalling Red LED: output signal 1...9999000 pulse/ k_h (kWh, kVAh, kVARh) Green LED: module operating (RUN) Number of inputs 0 Number of outputs 1 pulse Impulse duration 20 ms Communication port protocol POP Sampling rate 64 samples/cycle Cybersecurity Enable/disable communication ports Communication service Remote monitoring Product certifications CE conforming to IEC 61010-1 CULus conforming to UL 61010-1 CULus conforming to CSA C22.2 No 61010-1 RCM EAC C-Tick Mounting mode Clip-on Mounting position Vertical Mounting support Framework Provided equipment 1 x installation guide Measurement category Category III 480 V

Category II 480…600 V Electrical insulation class Double insulation Class II Flame retardance V-0 conforming to UL 94 Connections - terminals Current transformer: screw connection (bottom) 6 Voltage inputs: screw connection (top) 4 Material Polycarbonate Width 96 mm Depth 76.09 mm total: 61.64 mm embedded: Height 96 mm Net weight 300 g Compatibility code PM2110 Environment Service life 7 year(s) IP degree of protection IP54 front: conforming to IEC 60529 IP30 body: conforming to IEC 60529 Relative humidity 5…95 % at 50 °C Pollution degree 2 Ambient air temperature for operation -10…60 °C Ambient air temperature for storage -25…70 °C Operating altitude <= 2000 m Electromagnetic compatibility Electrostatic discharge conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 Surge immunity test conforming to IEC 61000-4-5 Conducted RF disturbances conforming to IEC 61000-4-6 Magnetic field at power frequency conforming to IEC 61000-4-8 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 Emission tests conforming to FCC part 15 class A Overvoltage category III Offer Sustainability REACh free of SVHC Yes EU RoHS Directive Compliant EU RoHS Declaration Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration WEEE The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins