DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 (1/4) 3tf_commercial_signal_mem2012f_en.fm EMC Components 3-terminal filters Signal line MEM series MEM2012F type
FEATURES
Multilayer chip EMC filter. Monolithic structure makes it highly reliable. Closed magnetic circuit structure makes it possible to achieve high-density mounting without crosstalk. Has sharp attenuation characteristics with excellent EMC suppression. Wide range of products compatible with passing frequencies and attenuating frequencies. -type circuit is used. Operating temperature range: –40 to +85°C APPLICATION Noise removal from signal lines of data terminals, digital cameras, computers, game machines, flat TVs, etc. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION CHARACTERISTICS SPECIFICATION TABLE Measurement equipment ˎEquivalent measurement equipment may be used. MEM 2012 F 10R0 T 001 Series name L×W×T dimensions Product internal code Cutoff frequency Packaging style Internal code2.0×1.25×0.85 mm (MHz) Cutoff frequency (MHz) Insertion loss (dB) Rated voltage (V)max. Rated current (mA)max. Part No. 10 20 [200MHz to 2GHz] 12 200 MEM2012F10R0T001 25 20 [300MHz to 2GHz] 12 200 MEM2012F25R0T001 50 20 [400MHz to 2GHz] 12 200 MEM2012F50R0T001 75 20 [700MHz to 2GHz] 12 200 MEM2012F75R0T001 100 20 [1.5GHz to 2GHz] 12 200 MEM2012F101RT001 Measurement item Product No. Manufacturer Frequency characteristics N5230C Keysight Technologies REACH SVHC-Free Lead FreeRoHS Pb Halogen Free BrCl
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 (2/4) 3tf_commercial_signal_mem2012f_en.fm EMC Components MEM2012F type INSERTION LOSS VS. FREQUENCY CHARACTERISTICS Measurement equipment ˎEquivalent measurement equipment may be used. Product No. Manufacturer N5230C Keysight Technologies 101 100 1000 10000 Insertion loss (dB) Frequency (MHz) 101R75R050R025R010R0
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 (3/4) 3tf_commercial_signal_mem2012f_en.fm EMC Components MEM2012F type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN CIRCUIT DIAGRAM RECOMMENDED REFLOW PROFILE PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS PACKAGE QUANTITY TEMPERATURE RANGE, INDIVIDUAL WEIGHT The storage temperature range is for after the assembly. Dimensions in mm 2±0.2 GND 0.1min. IN/OUT GND OUT/IN 1.25±0.2 0.2min 0.2min 0.85±0.15 Dimensions in mm 0.4 1.4 1.6 GND Natural cooling 10s max. 60 to 120s Preheating 30 to 60s Soldering 230°C 230°C 250 to 260°C 180°C 150°C Time Peak Temperature Type A B K Package quantity 4,000 pcs/reel Operating temperature range Storage temperature range Individual weight –40 to +85 °C –40 to +85 °C 8 mg 2.0±0.5 ø13±0.2 ø21±0.8 Dimensions in mm 1.0 E ø180±2.0 14.4max. ø60min. 8.4 +2.0 –0.0 8.0±0.3 1.75±0.1 4.0±0.1 4.0±0.1 2.0±0.05 B A 3.5±0.05 Dimensions in mm Sprocket hole 1.5 +0.1 CavityK 160min. Taping 200min. 300min.Drawing direction Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190207 (4/4) 3tf_commercial_signal_mem2012f_en.fm EMC Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equi p- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damag e to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipmentɹɹ (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng pro- tection circuit/device or providing backup circuits in your equipment. REMINDERS