ME813AU-WH50C | DigiCamel IC Datasheet

Online Datasheet

Read ME813AU-WH50C online.

ME813AU-WH50C FTDI | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 17

Technical content

Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentat ion are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this produ ct. Your statutory rights are not affected. T his product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminar y information that may be su bject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Pa rk, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright © Bridgetek Limited 1 ME813AU-WH50C Module Datasheet Version 1.0 Document Reference No.: BRT_000106 Clearance No.: BRT#064 Future Technology Devices International Datasheet ME813AU-WH50C Display Module General Purpose Multi Media Controller

1 Introduction

The ME813AU-WH50C is a development module for Bridgetek’s FT813, Embedded Video Engine (EVE) graphics controller IC. This module behaves as a USB device, with an FT4222H USB to SPI bridge built on -board so that the module can be accessed from a PC or any other USB host. The ME813AU-WH50C module includes a 5.0 inch 800*480 TFT LCD panel with capacitive touch screen, and an audio amplifier to drive an 8Ω/1W speaker.

1.1 Features

The ME813AU-WH50C module utilises the FT813, Bridgetek’s 2nd generation EVE chip . Graphic, audio and touch functions of the FT813 can be a ccessed with the ME813AU-WH50C. For a full list of the FT813’s features, refer to the FT81x datasheet. The ME813AU-WH50C has the following features:  Ready to use 5 inch WVGA LCD module.  Supports portrait and landscape display mode.  Bright backlight LED with dimming.  Supports capacitive touch up to 5 fingers.  Supports mono audio from FT813 or external source.  On board audio amplifier for driving an external 8Ω /1W speaker.  Support USB bus power.  Support USB high speed connection to PC or other USB host.

2 Ordering Information

Part No. Description ME813AU-WH50C FT813 module, with FT4222H USB interface, 5.0 inch 800*480 TFT LCD capacitive touch panel preinstalled. CleO-SPK1 Accessory – An 8Ω/1W speaker enclosure with connecting wires to ME813AU- WH50C. VA-FC-1M-BKW Accessory – Flat USB A to Micro B Cable 1M- Black and White VA-FC-1M-BLW Accessory – Flat USB A to Micro B Cable 1M- Blue and White Table 2-1 – Ordering information

3 Board Interface Description

The ME813AU-WH50C module is intended for direct use into existing applications that require a display. This module is suitable for interfacing with a PC or other USB host.

3.1 Board Profile

Figure 3-1 – ME813AU-WH50C board connectors

3.2 CN100- Micro USB receptacle

CN100 is a micro USB connector. When the USB host is connected, the host controls the ME813AU- WH50C module functions through the FT4222H USB-to-SPI bridge. Pin No. Name Type Description

1 VBUS P USB VBUS +5V power supply

2 D- I/O USB D- data line

3 D+ I/O USB D+ data line

4 NC - No connection

5 GND P Ground

Table 3-1 – CN100 pin description CN13- Audio connector CN100- USB connector

3.3 CN13- Audio connector

The ME813AU-WH50C supports a mono speaker output through CN13. A PWM audio signal from the FT813 goes through a 3-stage RC filters and the audio amplifier, to drive the 8Ω speaker if connected. Maximum output power to the speaker is 1 Watt. A ready made speaker module (CleO-SPR1) is available from Bridgetek. An alternative, mono line -in audio input is also provided on CN13. Users can drive in their own audio source to the on board power amplifier. Pin No. Name Type Description

1 SP- O 8Ω speaker minus terminal

2 SP+ O 8Ω speaker plus terminal

3 AGND P Audio ground

4 AUD_IN I Audio Line IN

Table 3-2 – CN13 pin description

4 Specifications

4.1 Electrical Specification

Parameter Description Minimum Typical Maximum Units Notes VCC VBUS supply voltage 4.5 5.0 5.5 V USB power Icc1 VBUS operating current - 400 - mA With LCD and Backlight LED on Icc2 VBUS operating current - 800 - mA Add 1W speaker (assumes powered from a USB charging hub or USB3.0 port) T Operating temperature -20 - +70 ℃ Table 4-1 - Operating Voltage and Current

4.2 Display Specification

LCD Type TFT active matrix - Display Colours 16.7M - Display active area 108.0(H) * 64.8(V) mm 5.0 inch diagonal Number of Pixels 800(RGB)*480 dots Pixel pitch 0.135(H) * 0.135(V) mm Backlight 18 white LEDs - Touch screen 5-finger capacitive touch - Table 4-2 - LCD and Touch Information

4.3 Optical Specification

Table 4-3 - 5.0” TFT Optical specification Note: The definition of viewing angle: refer to the figures below (if looking at the reverse side of the module the FTDI logo on the PCB is facing down).

5 Board Schematics

Figure 5-1 – Board Schematic (page 1) S_INT# S_PD# S_IO3 S_IO2 S_CS# S_MISO S_SCK S_MOSI GND GPIO3 BL_PWM PCLK DISP HSYNC VSYNC DE AUD_PD# GNDGND 12MHzC19 18pF C18 18pF C13 0.1uF GND C14 0.1uF D3V3VOUT1V2 C16 0.1uF GND D3V3 C15 0.1uF R1 33R R31 100RPCLK DISP HSYNC VSYNC DE LEDK LEDA GND D3V3 11 1010 1111 1212 1313 1414 1515 1616 1717 1818 1919 2020 2121 2222 2323 2424 2525 2626 2727 2828 2929 3030 3131 3232 3333 3434 3535 3636 3737 3838 3939 4040 0.5B-40PBS CTP_SDA CTP_SCL CTP_INT# CTP_RST# AL_PWM GND 0.22uF R15 4.7k 2.2nF 1N4148 R21 10k/1% 0.1uF R22 1.6RLED Current Sense R22 95mV/1.6R = 60mA LEDK LEDA BL_PWM GND GND GNDGND GND NR3015T220M VOUT 1 VIN2 FB 6EN3 AGND4 SW 7 PGND8 EP9 MIC2289-34YML Backlight LED driver RP1 100R X 4 RP2 100R X 4 RP3 100R X 4 RP4 100R X 4 RP5 100R X 4 RP6 100R X 4 RP7 100R X 4 GND GND CN0 HEADER 1 Optional:Connct to TFT panel metal frame DNM 10uF C12 10uF Module: ALL EVE2 and LCD Interface Module: ALL DNM GND 1 SF2 Shield Finger AUDIO_L3 GND4 SCK5 MISO6 MOSI7 CS_N8 GPIO0/IO29 GPIO1/IO310 VCCIO111 GPIO212 INT_N13 PD_N14 X1/CLK16 X217 GND18 VCC19 VOUT1V220 VCC21 VCCIO222 CTP_RST_N23 CTP_INT_N24 CTP_SCL25 CTP_SDA26 GND27 DE 29VSYNC 30HSYNC 31DISP 32PCLK 33B7 34B6 35B5 36B4 37B3 38B2 39 GND 42 G7 43G6 44G5 45G4 46G3 47G2 48 R7 51R6 52R5 53R4 54R3 55R2 56GND EP R11 R02 GPIO315 BACKLIGHT28 B0 41 B1 40 G1 49G0 50 FT813Q CTP_SDA CTP_SCL CTP_INT# CTP_RST# AVCC FB3 600R/1A GND CN_6Pin_FPC CTP_SDA CTP_SCL CTP_INT# CTP_RST# D3V3 R65 R66 CTP Connector

Copyright © Bridgetek Limited 10 ME813AU-WH50C Module Datasheet Version 1.0 Document Reference No.: BRT_000106 Clearance No.: BRT#064 Figure 5-2 – Board Schematic (page 2) AL_PWM R10 33R SHDN1 BYPASS2 IN+3 IN-4 VO+ 5VDD 6 GND 7VO- 8 GND 9 TPA6205A1 C11 1uF R51 10k/1% R39 10k/1% R52 36k/1% R40 36k/1% C20 0.47uF C21 0.22uF AGND R53 47k R36 4.7nF R37 4.7nF R38 4.7nF AGND AGND AGND VDD_AUD AGND SP- SP+ 2 4 3 5 OE SN74LVC1G125DBVR D3V3 GND 0.1uF D3V3 GND AGNDC23 0.1uF VDD_AUD C24 10nF AGND Max peak current ~400mA for 8-ohm speaker GND FB1 600R/1A FB2 600R/1A AGND AGND R50 33R AUD_PD# AVCC R58 0R R54 0R CN13 JST HDR1X4 AGND AUD C10 0.47uF 0.47uF R69 10k/1% AUD_1 C22 10uF GND MB_VBUS 3V3_IN1 VIN5 BS 1 LX 6 FB 3 EN4 GND2 U101 AOZ1282CI R120 10K C104 10uF +5V L100 22uH/1.4A D100 MSS1P3L R122 12.4K/1% R121 39K/1% +3V3 Vout=0.8*(1+R121/R122) C114 0.1uF C105 0.1uF C107 0.1uF C106 10uF Audio_Filter and Amplifier Power Supply Module: ALL Module: : ALL GND GND LED1 Red R60 470R D3V3 TP2 SMD [Vin] [Vout] JP1 JP2 MB_VBUS AVCC 3V3_IN1 D3V3 3.3V_IN MB_VBUS 3V3_IN1 AVCC D3V3 Power Input Option ME813AU-WH50C ME813A-WH50C JP1 JP2 1-2 1-2 2-3 2-3 5V_IN 3V3_IN(Only) POWER INPUT

Copyright © Bridgetek Limited 11 ME813AU-WH50C Module Datasheet Version 1.0 Document Reference No.: BRT_000106 Clearance No.: BRT#064 Figure 5-3 – Board Schematic (page 3) FB100 600R/1A GND MB_VBUS MB_SCK MB_MISO MB_MOSI MB_IO2 MB_IO3 GND MB_VBUS R111 47k R110 10K D3V3 D3V3 MB_VO3V3 GND USB_D_N USB_D_P R102 12K 1%GND VCCIO 7 MISO 9SCK 8 IO2 11 SS0O 17 GPIO2 15 GPIO3 16 DP23 RESET3 VCC5V 26 GPIO1 14GPIO0 13 DM22 DCNF15 XSCO19 SS 32 IO3 12 MOSI 10 DGND28 AGND27 DGND6 DCNF04 DEBUGGER1 STEST_RESETN2 VPP 29 BCD_DET31 VOUT3V3 25 UGND24 UGND20 XSCI18 VBUS_DET30 RREF21 Gnd 33 U100 FT4222HQ GNDGND C109 27pF C108 27pF R117 MB_VBUS D3V3 GND MB_VO3V3 GND C111 0.1uF C112 0.1uF MB_VBUS GND C110 0.1uF C103 0.47uF Y100 12MHz C113 4.7uF D3V3 R109 10K R112 10K R107 10K R101 10K R103 33R R104 33R R105 33R R106 33R R108 33R S_MOSI S_MISO S_SCK S_IO3 S_IO2 R113 MB_GPIO_1 MB_PD# MB_GPIO_2 R114 33R S_CS# R115 33R R116 33R S_PD# S_INT# R118 33R MB_GPIO3 DNM VBUS 1 D- 2 D+ 3 GND 5ID 4 CN100 USB Micro-B FT4222_USB TO QSPI BRIDGE Module: ME813AU-WH50C GND MA_IO3 MA_SCK MA_MISO MA_MOSI MA_IO2 MA_CS# MA_PD# MA_INT# AL_PWM 11 2 2 33 4 4 55 6 6 77 8 8 99 10 10 1111 12 12 1313 14 14 1515 16 16 8x2 Pin Header R4 0R MB_VBUS MA_IO3 MA_SCK MA_MISO MA_MOSI MA_IO2 MA_CS# MA_PD# MA_INT# R45 33R R46 33R R47 33R R48 33R R49 33R R55 33R R56 33R R57 33R R44 4.7k D3V3 R43 47k R42 47k S_INT# S_PD# S_IO3 S_IO2 S_CS# S_MISO S_SCK S_MOSI MM900 INTERFACE MODEL: ME813A-WH50C GND1 SF1 Shield Finger AL_PWM 1010 1111 1212 1313 1414 1515 1616 CN_16pin_FPC Bottom 3.3V_IN GND MA_IO3 MA_SCK MA_MISO MA_MOSI MA_IO2 MA_CS# MA_PD# MA_INT# GL HOST INTERFACE Module: ME813A-WH50C 3.3V_INR3 0R MB_VBUS R130

6 Mechanical Dimensions

6.1 Module Dimensions

All units are in millimeters (mm). Figure 6-1 – Module Dimensions(side view) Figure 6-2 – Module Dimensions (bottom view) 0.7 8.2 15.8 R6.7X4

7 Application Example

7.1 Hardware Setup

Error! Reference source not found. shows the ME813AU-WH50C module connected to the PC USB host port or self -powered hub port throu gh a USB cable (suggest FTDI accessory VA -FC-1M-BKW or VA- FC-1M-BLW). The 1W speaker is optional (suggest Bridgetek accessory CleO-SPK1). Note that if the 1W speaker is used, the USB power shall be able to supply at least 900mA current. Figure 7-1 – ME813AU-WH50C connects to USB host

7.2 Software Setup

 Download the sample application for ME813AU -WH50C from the Bridgetek website at http://brtchip.com/eve-projects/.  Install the FT4222H driver on a Windows PC. (downloadable at http://www.ftdichip.com/Products/ICs/FT4222H.html)  Launch the demo application from the PC. The sample applications will demonstrate display, touch and audio functions of the ME813AU -WH50C module. Refer to AN_418_ME81XAU_SampleApp_PC_Introduction for more details. To USB host 1W/8Ω Speaker (Optional)

8 Contact Information

Head Quarters – Singapore Branch Office – Taipei, Taiwan Bridgetek Pte Ltd

178 Paya Lebar Road, #07-03

Tel: +65 6547 4827 Fax: +65 6841 6071 Bridgetek Pte Ltd, Taiwan Branch 2 Floor, No. 516, Sec. 1, Nei Hu Road, Nei Hu District Taipei 114 Taiwan, R.O.C. Tel: +886 (2) 8797 5691 Fax: +886 (2) 8751 9737 E-mail (Sales) sales.apac@brtchip.com E-mail (Sales) sales.apac@brtchip.com E-mail (Support) support.apac@brtchip.com E-mail (Support) support.apac@brtchip.com Branch Office - Glasgow, United Kingdom Branch Office – Vietnam Bridgetek Pte. Ltd. Unit 1, 2 Seaward Place, Centurion Business Park Glasgow G41 1HH United Kingdom Tel: +44 (0) 141 429 2777 Fax: +44 (0) 141 429 2758 Bridgetek VietNam Company Limited Lutaco Tower Building, 5th Floor, 173A Nguyen Van Troi, Ward 11, Phu Nhuan District, Ho Chi Minh City, Vietnam Tel : 08 38453222 Fax : 08 38455222 E-mail (Sales) sales.emea@brtichip.com E-mail (Sales) sales.apac@brtchip.com E-mail (Support) support.emea@brtchip.com E-mail (Support) support.apac@brtchip.com Web Site http://brtchip.com/ Distributor and Sales Representatives Please visit the Sales Network page of the Bridgetek Web site for the contact details of our distributor(s) and sales representative(s) in your country. System and equipment manufacturers and designers are responsible to ensure that their systems, and any Bridgetek Pte Limited (BRTChip) devices incorporated in their systems, meet all applicable safety, regulatory and system -level performance requirements. All application-related information in this document (including application descriptions, suggested Bridgetek devices and other materials) i s provided for reference only. While Bridgetek has taken care to assure it is accurate, this information is subject to customer confirmation, and Bridgetek disclaims all liability for system designs and for any applications assistance provided by Bridge tek. Use of Bridgetek devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, i ndemnify and hold harmless Bridgetek from any and all damages, claims, suits or expense resulting from such use. This docu ment is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product described in this docum ent, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. Bridgetek Pte Limite d, 178 Paya Lebar Road, #07-03, Singapore 409030. Singapore Registered Company Number: 201542387H.

Copyright © Bridgetek Limited 15 ME813AU-WH50C Module Datasheet Version 1.0 Document Reference No.: BRT_000106 Clearance No.: BRT#064 Appendix A – References Document References FT81x Datasheet FT81x software programming guide FT4222H Datasheet FT81x sample applications Acronyms and Abbreviations Terms Description EVE Embedded Video Engine IC Integrated Circuit LCD Liquid Crystal Display LED Light Emitting Diode MCU Micro-Controller Unit PC Personal Computer PCB Printed Circuit Board PWM Pulse Width Modulation SPI Serial Peripheral Interface TFT Thin Film Transistor USB Universal Serial Bus

Copyright © Bridgetek Limited 17 ME813AU-WH50C Module Datasheet Version 1.0 Document Reference No.: BRT_000106 Clearance No.: BRT#064 Appendix C – Revision History Document Title: ME813AU-WH50C Module Datasheet Document Reference No.: BRT_000106 Clearance No.: BRT#064 Product Page: http://brtchip.com/eve-2-development-modules-landing/ Document Feedback: Send Feedback Revision Changes Date

1.0 Initial Release 2017-02-21

Product Information

ME813AU-WH50C specifications and overview.

Summary

Future Technology Devices International Version 1.0

Description

Future Technology Devices International Version 1.0

Source title ME813AU-WH50C Datasheet(PDF) - Future Technology Devices International Ltd.

Related Parts

More parts from the same family.

Browse manufacturer