ME40AG PENTAIR | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SUBMERSIBLE AGRICULTURAL PUMPS MYERS ME40AG SEriES

APPLICATIonS

submersible pumps are engineered specifically for agricultural cooling systems. our modified design features an enclosed two-vane impeller to deliver optimal flow and head. To withstand harsh sump conditions, the pumps are constructed of the highest quality materials. An ME40AG pump will provide years of reliable service. Capacities – 70 GPM (265 LPM) Shut-off Head – 33’ (10 m) operation – Manual or automatic Solids Handling – 3/4” (19 mm) Liquids Handling – Sump or recirculated water Intermittent Liquid Temperature – Up to 140°F (60°C) Motor/Electrical Data – 4/10 HP, 1650 RPM, permanent split capacitor type, 115V, 8A, 1Ø, 50/60Hz; 230V, 4A, 1Ø, 50/60Hz Acceptable pH Range – 6-9 Specific Gravity – .9-1.1 Viscosity – 28-35 SSU Discharge, nPT – 1-1/2” (38.1 mm) Housing – Cast iron, class 30, ASTM 48 Motor Bearings – Ball bearing-lower, top-sleeve Impeller – Enclosed, engineered thermoplastic Impeller Wear Ring – 304 SST Volute – Thermoplastic Mechanical Shaft Seal – Type 6, carbon and ceramic Fasteners – 300 series SST Power Cord – 10’ (automatic), 20’ (manual); 16/3, SJTW Min. Sump Diameter – 24” (61 cm) SPECIFICATIonS Efficient Dosing The two-vane impeller provides the flow and head required for demanding dosing systems and sump applications Powerful Starts High-torque, permanent split capacitor (PSC) motor; no starting switches or relays to wear out Rugged and Cool Rugged-built, oil-filled motor for continuous bearing lubrication and maximum heat dissipation Water-tight Fit Positive sealing, quick-connect float and switch cords make replacement easy Improved Sealing Long, flexible Type 6 seal provides high-pressure sealing with improved seal face protection by location Automatically Better Field-tested, wide-angle, mercury- free mechanical float switch provides maximum drawdown (automatic models only) Dual operation Automatic float switch or manual operation by plugging directly into outlet Thermal overload Heat sensor overload protection with automatic reset when motor cools to a safe operating temperature Pump Protection Suction screen included to prevent debris from entering pump FEATURESAgricultural cooling systems, sump drainage, water transfer

oRDERInG InFoRMATIon

Approx. Catalog Phase/ Discharge Switch Cord Wt. number HP Volts Cycles Amps Size Type Length Lbs. ME40AG-11 4/10 115 1/50 8 1-1/2" Manual 20' 27 ME40AG-21 4/10 230 1/50 4 1-1/2” Manual 20’ 27 ME40AGP-11 4/10 115 1/50 8 1-1/2” Tethered 20’ 27 1/60 Automatic* ME40AGP-21 4/10 230 1/50 4 1-1/2” Tethered 20’ 27 1/60 Automatic* *Piggyback

M9176SSE (05/01/14) Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. © 2014 Pentair Ltd. All rights reserved. SUBMERSIBLE AGRICULTURAL PUMPS MYERS ME40AG SEriES PUMP PERFoRMAnCE USA 293 WriGht StrEEt, DELAvAn, Wi 53115 WWW.FEMYErS.COM Ph: 888-987-8677 OrDErS FAX: 800-426-9446 CAnADA

490 PinEBUSh rOAD, Unit 4, CAMBriDGE, OntAriO n1t 0A5

Ph: 800-363-7867 OrDErS FAX: 888-606-5484 Capacity gallons per minute Total head in meters Total head in feet Capacity liters per minute 02 04 08 060 05 0 200 300150100 250 ME40A G 60Hz 4/10 HP ME40A G 50Hz 4/10 HP 9.19" [233] 11.68" [297] 5.66" [144] 1½" NPT Discharge 12.44" [316] 3.89" [99]