ME2012-U SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • P ower Factor Corrected (PFC) Charger – Our PFC charger is built into all of our inverter / chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC current than standard chargers. C hoices – The ME Series comes in three power models and optional built-in branch rated AC output breakers, allowing you to choose the model that is right for you. V ersatile mounting – Mount the ME Series on a shelf, bulkhead, or even upside down.
  • L ightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • M ultiple ports – The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • A ccessible design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be. C onvenient switches – The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • E xpanded transfer relay – 60 Amp transfer service is available on all models, and can be wired in three ways, including single in / single out, single in / dual out, or dual in / dual out. B uy with ease – The ME Series is backed by a three-year (36-month) limited warranty. Introduction The ME Series Inverter / Charger from Sensata Technologies is a modified sine wave inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective. Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable. Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power. Model Numbers
  • M E2012-U M E2012-F
  • M E2012-20B-U
  • M E2512-U
  • M E3112-U Available For
  • Ma rine Systems R V Systems Available Accessories
  • Au to Generator Start B attery Monitor Kit
  • C onduit Box
  • D C Load Disconnect
  • F use Blocks
  • I gnitions Switch Lockout
  • M agWeb
  • R emote - ME-ARC
  • R emote - ME-RC
  • R emote - MM-RC
  • R emote Switch Adapter
  • S mart Battery Combiner
  • N ew features available using the ME-ARC (with v5.4 or higher firmware). Modified Sine Wave 12 2000-

3100 VA Battery Voltage Options Continuous Output Options

Copyright © 2022 Sensata Technologies, Inc. sensata.com SPECIFICATIONS ME2012 ME2512 ME3112 INVERTER SPECIFICATIONS Input battery voltage range 9 - 16 VDC 9 - 16 VDC 9 - 16 VDC Nominal AC output voltage 120 VAC ± 5% 120 VAC ± 5% 120 VAC ± 5% Output frequency and accuracy 60 Hz ± 0.1 Hz 60 Hz ± 0.1 Hz 60 Hz ± 0.1 Hz 1 msec surge current (amps AC) 60 100 120 100 msec surge current (amps AC) 37 45 50 5 sec surge power (real watts) 3700 5000 6000 30 sec surge power (real watts) 3450 4500 4800 5 min surge power (real watts) 3100 3500 3950 30 min surge power (real watts) 2400 2900 3500 Continuous power output at 25° C 2000 VA 2500 VA 3100 VA Maximum continuous input current 266 ADC 333 ADC 413 ADC Inverter efficiency (peak) 95% 91% 90% Transfer time 16 msecs 16 msecs 16 msecs Search mode (typical) 5 watts 5 watts 5 watts No load (120 VAC output, typical) 20 watts 23 watts 25 watts Waveform Modified Sine Wave Modified Sine Wave Modified Sine Wave CHARGER SPECIFICATIONS Continuous output at 25° C

100 ADC 120 ADC 160 ADC

Charger efficiency 85% 85% 85% Power factor > .95 > .95 > .95 Input current at rated output (AC amps) 15 18 22 GENERAL FEATURES AND CAPABILITIES Transfer relay capability 2 legs at 30 A for 120 V/30 A or 240 V/60 A service Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ Battery temperature compensation Yes, 15 ft Battery Temp Sensor standard Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Overcurrent protection Yes, with two overlapping circuits Overtemperature protection Yes on transformer, MOSFETS, and battery Corrosion protection Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners Dual AC branch rated output breakers Optional on the ME2012 - AC breakers in 20 amp ratings Listings ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 Warranty Three years

Rev: 09/21/2022 P art#64-0100 vK Copyright © 2022 Sensata Technologies, Inc. www.sensata.com ENVIRONMENTAL SPECIFICATIONS Temperature (Operating/Non-operating) -20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F) Operating humidity 0 to 95% RH non-condensing PHYSICAL SPECIFICATIONS Dimensions (l x w x h) Mounting Shelf or wall (vents not allowed to face downward unless ME-CB or MMP/MP is installed Weight 37 lb (16.8 kg) 41 lb (18.6 kg) 46 lb (20.9 kg) Shipping weight 46 lb (20.9 kg) 41 lb (18.6 kg) 56 lb (25.5 kg) Max operating altitude 15,000’ (4570 m) AGENCY APPROVALS & CERTIFICATIONS

  • E TL Listed to UL/cUL 458, CSA C22.2 #107.1-01 Testing for specifications at 25° C Specifications subject to change without notice. GENERAL NOTES Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY, AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA CONTACT US Regional head offices: United States of America Sensata Technologies Attleboro, MA Phone: 508-236-3800 mail: support@sensata.com Netherlands Sensata Technologies Holland B.V. Hengelo Phone: +31 74 357 8000 mail: support@sensata.com China Sensata Technologies China Co., Ltd. Shanghai Phone: +8621 2306 1500 E-mail:support@sensata.com