MCX480D5 | DigiCamel IC Datasheet

Online Datasheet

Read MCX480D5 online.

MCX_17 CRYDOM | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 5

Technical content

SIP SSR
Ratings of 5 A @ 660 VAC
SCR output for heavy industrial loads
AC or DC control
Zero-crossing (resistive loads) or random-fire (inductive loads) output
Plastic encapsulated PRODUCT SELECTION Control Voltage 5 A 3-15 VDC 4-15 VDC MCX380D5 15-32 VDC MCXE380D5 18-36 VAC 90-140 VAC 5 A MCX480D5 MCXE480D5 5 A MCX240D5 MCXE240D5 MCXE240A5 MCX240A5 OUTPUT SPECIFICATIONS (1) AVAILABLE OPTIONS

Description

Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mA] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum Load Current [Arms] (3) Minimum Load Current [Arms] Maximum Surge Current (16.6msec) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum I² t for Fusing (8.3msec) [A² sec] Minimum Power Factor (at Maximum load) 48-530 1200 0.1 500 0.06 250 1.4 260 0.5 380VAC 48-660 1200 0.1 500 0.06 250 1.4 260 0.25/0.18 480VAC 12-280 600 0.1 500 0.06 250 1.4 260 0.5 240VAC

240 DEMCX 5

Blank: Zero Voltage Turn-On R: Random Turn-on Operating Voltage 240: 12-280 VAC 380: 48-530 VAC 480: 48-660 VAC R Operating Rating 5: 5 Amps Control Input Type D: DC Input A: AC InputSeries Required for valid part number For options only and not required for valid part number Control Voltage Blank: 3-15 VDC (240 and D suffix only) 4-15 VDC (380/480 and D suffix only) 90-140 VAC (A suffix only) E: 15-32 VDC (D suffix only) 18-36 VAC (A suffix only) FDE-07-01 REV. A

120 VACNominal Voltage

90-140 VACControl Voltage Range

90.0 Vrms Maximum Turn On Voltage

10.0 Vrms

Input Current @ Nominal Voltage Nominal Input Impedance 14.1K Ohm 10Maximum Turn-On Time [msec] (3) Maximum Turn-Off Time [msec] 40 MCXE240A5

24 VAC

18.0 Vrms

2.0 Vrms

2.1K Ohm MCX380Dx

5 VDC

4.0 VDC

1.0 VDC

240 Ohm

3.0 VDC

300 Ohm

24 VDC

15.0 VDC

1500 Ohm

GENERAL SPECIFICATIONS (1) Description Parameters Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 VDC) 109 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40 to 80 °C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 0.7 oz (20g) Encapsulation Thermally Conductive Epoxy Meets the requirements of IEC60335-1 GENERAL NOTES (1) All parameters at 25°C unless otherwise speciﬁed. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) Turn-On time for random turn-on versions is 0.01 msec (DC control Models). LOAD TRIGGER CIRCUIT B A AC -DC +DC Load can be wired in location A or B AC 2 1LOAD Load can be wired in location A or B LOAD TRIGGER CIRCUIT 4 V LOAD B A AC AC AC AC 2 1 AC/DC Converter

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. THERMAL DERATE INFORMATION MECHANICAL SPECIFICATIONS AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 IEC60335-1: Resistance to heat and ﬁre meets the requirements of section 30, evaluated by TUV SUD. Glow Wire Test, per requirements of IEC/EN 60695-2-10 and IEC/EN 60695-2-11 Ball Pressure Test, per requirements of IEC/EN 60695-10-2 E116949 Rev. 080417 ECN 20291 6.0 5.0 4.0 3.0 2.0 20 40 60 80 1.0 Ambient Temperature (ºC) Max. Load Current vs. Temp. Load Current (Amps) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Agency Approvals BOTTOM VIEW LOAD 1 2 3 4 CONTROL 1 draft top to base .040 (1.0) DIA. (4 PLACES) 1.00 (25.4) 0.25 (.64) .40 (10.2) .16 ± .015 (4.1)±0.4 1.70 (43.1) 1.10 (27.9) .70 (17.8)

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

The product's side panels may be hot, allow the product to cool before touching.
Follow proper mounting instructions including torque values.
Do not allow liquids or foreign objects to enter this product. Failure to follow these instructions can result in serious injury, or equipment damage. RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER
Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher.
Respecter les consignes de montage, et notamment les couples de serrage.
Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG
Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren.
Beachten Sie die Montageanweisungen,
Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD
Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo.
Respetar las instrucciones de montaje, y en particular los pares de apretado.
No dejar que penetren líquidos o cuerpos extraños en el producto. La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO
I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo.
Seguire le istruzioni di montaggio corrette.
Non far entrare liquidi o oggetti estranei in questo apparecchio. 如不能正确执行这些操作说明，极有可能造成严重人体伤害或者设备的损坏。材料损坏和高温外壳的危险性
产品的一侧面板可能很热，在其冷却前请不要触碰。
遵照正确的安装说明，包括扭矩值。
请勿让液体及其他异物进入本产品。 DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.
Disconnect all power before installing or working with this equipment.
Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION.
Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION
Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil
Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION.
Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen
Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSIONE.
Spenga tutta l'alimentazione che fornisce questa apparecchiatura prima di lavorare a questa apparecchiatura
Verificare tutti i collegamenti e sostituire tutte le coperture prima dell’accensione L'omissione di queste istruzioni provocherà la morte o lesioni serie 存在电击、爆炸或电弧闪烁危险
在操作此设备之前请先关闭电源。若不遵守这些说明，可能会导致严重的人身伤害甚至死亡。

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium (Cr (VI)) biphenyls (PBB) diphenyl ethers (PBDE) Semiconductor die Solder 附件 - 环保信息此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。有毒有害物质或元素件部名称铅汞镉六价铬多溴联苯多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片焊接点

Product Information

MCX480D5 specifications and overview.

Summary

PCB Mount

Description

PCB Mount

Source title MCX480D5 Datasheet(PDF) - Crydom Inc.,

Related Parts

More parts from the same family.

Browse manufacturer