MCWI02

MCWI02 MINMAX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

DC/DC CONVERTER 2W , SIP-Package E-mail:sales@minmax.com.tw Tel:886-6-2923150 2013/01/30 P3 Page 1 of 3

FEATURES

► High Power Density in SIP-8 Package ► Small Footprint: 21.8 x 9.3 mm (0.86”x 0.37”) ► Ultra-wide 4:1 Input Ranges ► Fully regulated Output ► Operating Temp. Range –40° to +90°C ► Overload Protection ► I/O-isolation 1500 VDC ► Remote On/Off Control ► 3 Years Product Warranty PRODUCT OVERVIEW The MINMAX MCWI02 series is a range of isolated 2W DC/DC converter modules featuring fully regulated output and ultra-wide 4:1 input voltage ranges. The product comes in a SIP-8 package with a very small footprint occupying only 2.0 cm2 (0.32 square in.) on the PCB. An excellent efficiency allows an operating temperature range up to 75°C at full load. Further features include remote On/Off control and over load protection. The very compact dimensions of these DC/DC converters make them an ideal solution for many space critical applications in battery-powered equipment and instrumentation. Model Selection Guide Output Current Input Current Efficiency (typ.) Input Voltage (Range) Output Voltage Max. @Max. Load @No Load Max. capacitive Load @Max. Load Model Number VDC VDC mA mA(typ.) mA(typ.) µF % MCWI02-12S033 3.3 500 183 1000 75 MCWI02-12S05 5 400 208 1000 80 MCWI02-12S12 12 167 204 170 82 MCWI02-12S15 15 134 204 110 82 MCWI02-12D05 ±5 ±200 208 470# 80 MCWI02-12D12 ±12 ±83 202 100# 82 MCWI02-12D15 (4.5 ~ 18) ±15 ±67 204 47# 82 MCWI02-24S033 3.3 500 92 1000 75 MCWI02-24S05 5 400 104 1000 80 MCWI02-24S12 12 167 102 170 82 MCWI02-24S15 15 134 102 110 82 MCWI02-24D05 ±5 ±200 104 470# 80 MCWI02-24D12 ±12 ±83 101 100# 82 MCWI02-24D15 (9 ~ 36) ±15 ±67 102 47# 82 MCWI02-48S033 3.3 500 46 1000 74 MCWI02-48S05 5 400 52 1000 80 MCWI02-48S12 12 167 51 170 82 MCWI02-48S15 15 134 51 110 82 MCWI02-48D05 ±5 ±200 52 470# 80 MCWI02-48D12 ±12 ±83 51 100# 82 MCWI02-48D15 (18 ~ 75) ±15 ±67 51 47# 82 # For each output

DC/DC CONVERTER 2W , SIP-Package E-mail:sales@minmax.com.tw Tel:886-6-2923150 2013/01/30 P3 Page 2 of 3 Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models -0.7 --- 25 24V Input Models -0.7 --- 50 Input Surge Voltage (1 sec. max.) 48V Input Models -0.7 --- 100 12V Input Models 3 4 4.5 24V Input Models 4.5 6 8.5 Start-Up Threshold Voltage 48V Input Models 8.5 12 17 12V Input Models --- --- 4 24V Input Models --- --- 8 Under Voltage Shutdown 48V Input Models --- --- 16 VDC Reverse Polarity Input Current --- --- 0.5 A Short Circuit Input Power --- --- 1500 mW Internal Filter Type Capacitor type Internal Power Dissipation All Models --- --- 2500 mW Output Specifications Parameter Conditions Min. Typ. Max. Unit Output Voltage Setting Accuracy At 50% Load and Nominal Vin --- --- ±2.0 %Vnom. Output Voltage Balance Dual Output, Balanced Loads --- ±1.0 ±2.0 % Line Regulation Vin=Min. to Max. --- ±0.3 ±0.5 % Load Regulation Io=0% to 100% --- ±0.5 ±1 % Min.Load No minimum Load Requirement Ripple & Noise (20MHz) --- 50 100 mV P-P Transient Recovery Time --- 300 500 µsec Transient Response Deviation 25% Load Step Change --- ±3 ±5 % Temperature Coefficient --- ±0.01 ±0.02 %/ ℃ Output Short Circuit Continuous General Specifications Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage (rated) 60 Seconds 1500 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 250 500 pF Switching Frequency --- 300 --- KHz MTBF (Calculated) MIL-HDBK-217F@25 ℃, Ground Benign 1,000,000 --- --- Hours Input Fuse 12V Input Models 24V Input Models 48V Input Models 750mA Slow-Blow Type 350mA Slow-Blow Type 135mA Slow-Blow Type Remote On/Off Control Parameter Conditions Min. Typ. Max. Unit Converter On Open or high impedance Converter Off 2~4mA current applied via 1Kohm resistor Standby Input Current Supply Off & Nominal Vin --- 2.5 --- mA Environmental Specifications Parameter Conditions Min. Max. Unit Operating Ambient Temperature Range (See Power Derating Curve) Natural Convection -40 +90 ℃ Case Temperature --- +105 ℃ Storage Temperature Range -55 +125 ℃ Humidity (non condensing) --- 95 % rel. H Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) --- 260 ℃

DC/DC CONVERTER 2W , SIP-Package 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw 2013/01/30 P3 Page 3 of 3 Minmax Technology Co., Ltd. Power Derating Curve Output Power (%) Notes 1 Specifications typical at Ta=+25 ℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%. 3 Ripple & Noise measurement bandwidth is 0-20 MHz. 4 All DC/DC converters should be externally fused at the front end for protection. 5 Other input and output voltage may be available, please contact factory. 6 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 7 Specifications are subject to change without notice. Package Specifications Mechanical Dimensions Pin Connections Pin Single Output Dual Output 1 -Vin -Vin 2 +Vin +Vin

3 Remote On/Off Remote On/Off

5 NC NC

8 NC -Vout

NC: No Connection ►All dimensions in mm (inches) ►Tolerance: X.X ±0.5 (X.XX±0.0 2) X.XX ±0. 25 ( X.XXX±0.0 1) ►Pins ±0.1(±0.004) Physical Characteristics Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Pin Material : Alloy 42 Weight : 4.66g 2X2.54 [2X0.10] 5.08 [0.20] [3X0.10] 3X2.54 0.5 [0.02] 0.5 [0.02] 11.2 [0.44]3.2 [0.13] 21.8 [0.86] 20.8 [0.82] 0.50 [0.02] 0.25 [0.01] 2.7 [0.11] 9.3 [0.37] 1 2 3 5 6 7 8 Bottom View 2.0 [0.08]