MCT18X10X10C-103NU MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Page <1> V1.023/03/20 Common Mode Choke Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Schematic Diagram Note: 1. Wire UEFN/U (155°C) Ø0.5mm 2. N1 = N2 = 35TS (Reference) N1:C.W N2:C.CW Configurations and Dimensions A 23mm (Max.) B 13.5mm (Max.) C 15 ±1mm D 0 to 4mm E 7.5mm F 15 ±3mm F Ø0.5mm (Typ.) G 23mm (Max.)

Electrical Characteristics

10kHz / 50μA L (1-4) 10mH ±30% L (2-3) Ta = 25°C DCR (1-4) 125mΩ (Max.) DCR (2-3) IDC 2A Operating temperature : -25°C to +85°C Test Data for Mechanical Test Item A mm B mm C mm D mm mm mm F mm G mm Specification 23 (Max.) 13.5 (Typ.) (Max.) 11.57 0.5 20.33 0.49 20.27

Page <2> V1.023/03/20 Common Mode Choke Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Reliability Test Electric Characteristics Test Item Specifications Test Method and Remarks Operating temperature range -25°C to +85°C Including temperature rise due to self-generated heat. Storage condition Ambient temperature : 0°C to 40°C Humidity : Below 70% RH To maintain the solderability of terminal electrodes, care must be taken to control temperature and humidity in the storage area. Moisture sensitivity Appearance : No abnormality No damage DCR change : Within ±5% Inductance change : Within ±5% According to J-STD-020B level 3 Test condition : 60°C 60% RH Test duration : 40 hrs Recovery : 1 to 2 hours of recovery under the standard condition after the removal from the test chamber. Solderability All termination shall exhibit a continuous solder coating free from defects for a minimum of 95% of the surface area of any individual lead. According to J-STD-002B Steam aging category : 97°C 98% RH Steam aging duration : 8 hrs Solder : Lead-free solder Solder temperature : 260 ±5°C Dip time : 5 +0 / -0.5s Material List No. Item Material Description

1 Core A07 T18 × 10 × 10C (Red)

2 Wire Ø0.5mm UEFN/U (155°C) 3 Solder (Lead-free) Sn99.3% / Cu0.7%

4 Vernish T-4260 (a) / TX-111

5 Space FR4 (thickness 2mm)

6 Glue TH100A and TH100B

Page <3> V1.023/03/20 Common Mode Choke Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Part Number Table Description Part Number Choke, Common Mode, 10MH, 2A MCT18X10X10C-103NU Test Data for Electrical Test Item L (1-4) mH L (2-3) mH DCR (1-4) mΩ DCR (2-3) mΩ Condition 10kHz / 50μA 10kHz / 50μA Ta = 25°C Ta = 25°C Specification 10 ±30% 10 ±30% 125 (Max.) 125 (Max.) 1 9.42 9.42 96.66 96.28 2 9.8 9.8 96.69 95.81 3 10.35 10.35 95.66 95.64 4 10.4 10.4 96.76 96.13 5 10.1 10.1 97.82 96.07 Average 10.01 10.01 96.72 95.99