MCSO2F MICROCRYSTAL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MCSO2F family package 5×3.2 mm Low Jitter From 10 kHz up to 225 MHz Recommended Solder Pad: All dimensions in mm typical ELECTRICAL CHARACTERISTICS AT +25°C Frequency stability Over temperature range (see ordering info) Including: adjustment at +25°C long term aging 10 years over supply voltage ±5% over load min to max ΔF/F ≤ ± 100 ppm Frequency stability version T Over temperature range (see ordering info) Including: adjustment at +25°C long term aging 1 year over supply voltage ±5% over load min to max ΔF/F ≤ ± 50 ppm Supply voltage ± 5% 1)* Vdd 1.8 / 2.5 / 3.3 V Input current Idd see table 1 Output signal HC-MOS compatible Symmetry at Vdd/2 40 / 60 % Rise & fall time ≤ 20MHz For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) ≤7 ns Rise & fall time ≥ 20MHz (load 15pf 10% to 90%) ≤3 ns Start-up time t <5 ms Load min / max 3/47 pF Jitter ≤ 20MHz one sigma < 2rms ps Jitter > 20MHz one sigma < 10rms ps 100% Leadfree, RoHScompliant: DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. APPLICATIONS: - Avionics - Airbone equipments - Remote control - Security application - Radio Transceiver - Microprocessor clocks The MCSO2's are supplied on trays (128 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request 5.00 2.35 3.201.6 1.6 1 2 1.5 2.7 1.5 11.61 4 3 1 2 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd Package: Bottom view * 1) C = 47nF ceramic must be connected between GND & Vdd
Version 11/02.2015 Micro Crystal AG Tel. +41 32 655 82 82 Mühlestrasse 14 Fax +41 32 655 82 83 CH-2540 Grenchen sales@microcrystal.com Switzerland www.microcrystal.com ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance 10 to 2000Hz / 20g Shocks no resistance 5000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 5 x 3.2 x 1.6 Lids Ceramic Terminations option T3 on request with tinned Ag/Cu/Zn E/D option 1 on request Reaction time ˂ 1μs Pin 1 open → Pin 3 Clock H → Clock L → Low PRODUCT DESCRIPTION AND ORDERING INFORMATION: All specifications subject to change without notice. Frequency «MHz» 3.6864 4 8 10 12 12.8 14.7456 16 20 24 40 48 120 Other frequencies from 10 kHz up to 225 MHz on request STANDARD FREQUENCIES: - No power E/D function (pin 1) before Vdd is setting on - E/D option not available for F ˂ 500 kHz - E/D option on request (very low consumption in disable mode). H ˃ 20MHz blank ≤ 20MHz Z = Vdd 1.8V W = Vdd 2.5V V = Vdd 3.3V T = ±50ppm blank = ±100ppm A = 0 to +70°C B = -40 to +85°C C = -55 to +125°C X = custom Frequency option 1 E/D enable / disable option 2 blank Au plasted T3 = tinned customer spec N° MCSO2F H V T - C 48MHz E/D T3 XXX Frequency Fz 32 kHz F=< 10MHz ≤ 20MHz >20 to 225MHz W= Vdd = 2.5V < 300μA < 2mA < 3mA < 25mA V= Vdd = 3.3V < 1mA < 4mA < 5mA < 30mA TABLE 1: Idd (Without load) A unique part number will be generated for each product specification 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity)