MCR8DSM MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

1Motorola Thyristor Device Data /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0067/C0111/C0110/C0116/C0114/C0111/C0108/C0108/C0101/C0100 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114/C0115 Reverse Blocking Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control.

  • Small Size
  • Passivated Die for Reliability and Uniformity
  • Low Level Triggering and Holding Characteristics
  • Available in Two Package Styles Surface Mount Lead Form — Case 369A Miniature Plastic Package — Straight Leads — Case 369

ORDERING INFORMATION

  • To Obtain “DPAK” in Surface Mount Leadform (Case 369A) Shipped in Sleeves — No Suffix, i.e. MCR8DSN Shipped in 16 mm Tape and Reel — Add “T4” Suffix to Device Number, i.e. MCR8DSNT4
  • To Obtain “DPAK” in Straight Lead Version (Case 369) Shipped in Sleeves — Add “–1” Suffix to Device Number, i.e. MCR8DSN–1 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Repetitive Off–State Voltage (1) Peak Repetitive Reverse Voltage (TJ = –40 to 110°C, RGK = 1.0 K/C0087) MCR8DSM MCR8DSN VDRM VRRM 600 800 Volts On–State RMS Current (All Conduction Angles; TC = 90°C) IT(RMS) 8.0 Amps Average On–State Current (All Conduction Angles; TC = 90°C) IT(AV) 5.1 Peak Non–Repetitive Surge Current (One Half Cycle, 60 Hz, TJ = 110°C) ITSM Circuit Fusing Consideration (t = 8.3 msec) I2t 34 A2sec Peak Gate Power (Pulse Width ≤ 10 /C0109sec, TC = 90°C) PGM 5.0 Watts Average Gate Power (t = 8.3 msec, TC = 90°C) PG(AV) 0.5 Peak Gate Current (Pulse Width ≤ 10 /C0109sec, TC = 90°C) IGM 2.0 Amps Operating Junction Temperature Range TJ –40 to 110 °C Storage Temperature Range Tstg –40 to 150 THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance — Junction to Case Thermal Resistance — Junction to Ambient Thermal Resistance — Junction to Ambient (2) R /C0113JC R /C0113JA R /C0113JA 2.2 °C/W Maximum Lead Temperature for Soldering Purposes (3) TL 260 °C (1) VDRM for all types can be applied on a continuous basis. Ratings apply for negative gate voltage or RGK = 1.0 K/C0087; positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the device are exceeded. (2) Surface mounted on minimum recommended pad size. (3) 1/8″ from case for 10 seconds. Preferred devices are Motorola recommended choices for future use and best overall value. Order this document by MCR8DSM/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0067/C0082/C0056/C0068/C0083/C0077 /C0077/C0067/C0082/C0056/C0068/C0083/C0078 SCRs

8.0 AMPERES RMS

CASE 369A–13 STYLE 4 A K G A GA K Motorola Preferred Devices  Motorola, Inc. 1997

/C0077/C0067/C0082/C0056/C0068/C0083/C0077 /C0077/C0067/C0082/C0056/C0068/C0083/C0078

2 Motorola Thyristor Device Data

ELECTRICAL CHARACTERISTICS (TJ = 25°C; RGK = 1.0 K/C0087 unless otherwise noted) Characteristics Symbol Min Typ Max Unit Peak Reverse Gate Blocking Voltage (IGR = 10 /C0109A) VGRM 10 12.5 18 Volts Peak Forward Blocking Current Peak Reverse Blocking Current (VAK = Rated VDRM or VRRM ) (1) TJ = 25°C TJ = 110°C IDRM IRRM 500 /C0109A Peak Reverse Gate Blocking Current (VGR = 10 V) IRGM — — 1.2 /C0109A Peak On–State Voltage (2) (ITM = 16 A) VTM — 1.4 1.8 Volts Gate Trigger Current (Continuous dc) (3) (VD = 12 V, RL = 100 /C0087, TJ = 25°C) (VD = 12 V, RL = 100 /C0087, TJ = –40°C) IGT 5.0 200 300 /C0109A Gate Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 /C0087, TJ = 25°C) (VD = 12 V, RL = 100 /C0087, TJ = –40°C) (VD = 12 V, RL = 100 /C0087, TJ = 110°C) VGT 0.45 0.2 0.65 1.0 1.5 Volts Holding Current (VD = 12 V, I(init) = 200 mA, TJ = 25°C) (VD = 12 V, I(init) = 200 mA, TJ = –40°C) IH 0.5 1.0 6.0 mA Latching Current (VD = 12 V, IG = 2.0 mA, TJ = 25°C) (VD = 12 V, IG = 2.0 mA, TJ = –40°C) IL 0.5 1.0 6.0 mA DYNAMIC CHARACTERISTICS Characteristics Symbol Min Typ Max Unit Total Turn–On Time (Source Voltage = 12 V, RS = 6.0 K/C0087, IT = 16 A(pk), RGK = 1.0 K/C0087) (VD = Rated VDRM , Rise Time = 20 ns, Pulse Width = 10 /C0109s) tgt — 2.0 5.0 /C0109s Critical Rate of Rise of Off–State Voltage (VD = 0.67 X Rated VDRM , Exponential Waveform, R GK = 1.0 K/C0087, TJ = 110°C) dv/dt 2.0 10 — V//C0109s (1) Ratings apply for negative gate voltage or RGK = 1.0 K/C0087. Devices shall not have a positive gate voltage concurrently with a negative voltage on the anode. Devices should not be tested with a constant current source for forward and reverse blocking capability such that the voltage applied exceeds the rated blocking voltage. (2) Pulse Test; Pulse Width ≤ 2.0 msec, Duty Cycle ≤ 2%. (3) Does not include RGK current.

4 Motorola Thyristor Device Data

Figure 7. Typical Holding Current versus Figure 8. Typical Latching Current versus Figure 9. Holding Current versus Figure 10. Exponential Static dv/dt versus Figure 11. Exponential Static dv/dt versus Figure 12. Exponential Static dv/dt versus

/C0077/C0067/C0082/C0056/C0068/C0083/C0077 /C0077/C0067/C0082/C0056/C0068/C0083/C0078 5Motorola Thyristor Device Data PACKAGE DIMENSIONS CASE 369A–13 ISSUE Y D A K B RV S F L G 2 PL M0.13 (0.005) T E C U J H –T– SEATING PLANE Z DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.235 0.250 5.97 6.35 B 0.250 0.265 6.35 6.73 C 0.086 0.094 2.19 2.38 D 0.027 0.035 0.69 0.88 E 0.033 0.040 0.84 1.01 F 0.037 0.047 0.94 1.19 G 0.180 BSC 4.58 BSC H 0.034 0.040 0.87 1.01 J 0.018 0.023 0.46 0.58 K 0.102 0.114 2.60 2.89 L 0.090 BSC 2.29 BSC R 0.175 0.215 4.45 5.46 S 0.020 0.050 0.51 1.27 V 0.030 0.050 0.77 1.27 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 12 3 STYLE 4: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE

/C0077/C0067/C0082/C0056/C0068/C0083/C0077 /C0077/C0067/C0082/C0056/C0068/C0083/C0078

6 Motorola Thyristor Device Data

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://motorola.com/sps MCR8DSM/D◊