MCR310 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

© Semiconductor Components Industries, LLC, 2007 March, 2007 − Rev. 3

1 Publication Order Number:

Silicon Controlled Rectifiers Reverse Blocking Triode Thyristors Designed for industrial and consumer applications such as temperature, light and speed control; process and remote controls; warning systems; capacitive discharge circuits and MPU interface.

  • Center Gate Geometry for Uniform Current Density
  • All Diffused and Glass-Passivated Junctions for Parameter Uniformity and Stability
  • Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability
  • Low Trigger Currents, 200 /C0109A Maximum for Direct Driving from Integrated Circuits
  • Pb−Free Packages are Available MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Symbol Value Unit Peak Repetitive Forward and Reverse Blocking Voltage(1) (TJ = −40 to 110°C) (1/2 Sine Wave, RGK = 1 kΩ) MCR310-6 MCR310-8 MCR310-10 VDRM or VRRM 400 600 800 Volts On-State RMS Current (TC = 75°C) IT(RMS) 10 Amps Peak Non-repetitive Surge Current (1/2 Cycle, 60 Hz, TJ = −40 to 110°C) ITSM 100 Amps Circuit Fusing (t = 8.3 ms) I2t 40 A2s Peak Gate Voltage (t /C0112 10 /C0109s) VGM ±5 Volts Peak Gate Current (t /C0112 10 /C0109s) IGM 1 Amp Peak Gate Power (t /C0112 10 /C0109s) PGM 5 Watts Average Gate Power PG(AV) 0.75 Watt Operating Junction Temperature Range TJ −40 to +110 °C Storage Temperature Range Tstg −40 to +150 °C Mounting Torque − 8 in.-lb. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction to Case RθJC 2.2 °C/W Thermal Resistance, Junction to Ambient RθJA 60 °C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. (1) V DRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. SCRs

10 AMPERES RMS

ORDERING INFORMATION

MCR310−6 TO220AB 500/Box MCR310−8 TO220AB MCR310−10 TO220AB 500/Box 500/Box C G A TO−220AB CASE 221A STYLE 3 2 3 http://onsemi.com MARKING DIAGRAM x = 6, 8 or 10 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package MCR310−6G TO220AB (Pb−Free) 500/Box MCR310−8G TO220AB (Pb−Free) 500/Box MCR310−10G TO220AB (Pb−Free) 500/Box MCR310−xG AYWW Preferred devices are recommended choices for future use and best overall value.

http://onsemi.com PACKAGE DIMENSIONS TO−220AB CASE 221A−07 ISSUE AA STYLE 3: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.014 0.022 0.36 0.55 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 A K L V G D N Z H Q FB 123 −T− SEATING PLANE S R J U T C ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. MCR310/D PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative