MCR310 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1Motorola Thyristor Device Data /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0067/C0111/C0110/C0116/C0114/C0111/C0108/C0108/C0101/C0100 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114/C0115 Reverse Blocking Triode Thyristors . . . designed for industrial and consumer applications such as temperature, light and speed control; process and remote controls; warning systems; capacitive discharge circuits and MPU interface.

  • Center Gate Geometry for Uniform Current Density
  • All Diffused and Glass-Passivated Junctions for Parameter Uniformity and Stability
  • Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability
  • Low Trigger Currents, 200 µA Maximum for Direct Driving from Integrated Circuits MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Symbol Value Unit Peak Repetitive Forward and Reverse Blocking Voltage(1) (TJ = –40 to 110°C) (1/2 Sine Wave, RGK = 1 kΩ ) MCR310-2 MCR310-3 MCR310-4 MCR310-6 MCR310-8 MCR310-10 VDRM or VRRM 100 200 400 600 800 Volts On-State RMS Current (TC = 75°C) IT(RMS) 10 Amps Peak Non-repetitive Surge Current (1/2 Cycle, 60 Hz, TJ = –40 to 110°C) ITSM 100 Amps Circuit Fusing (t = 8.3 ms) I2t 40 A2s Peak Gate Voltage (t /C0112 10 µs) VGM ±5 Volts Peak Gate Current (t /C0112 10 µs) IGM 1 Amp Peak Gate Power (t /C0112 10 µs) PGM 5 Watts Average Gate Power PG(AV) 0.75 Watt Operating Junction T emperature Range TJ –40 to +110 °C Storage Temperature Range Tstg –40 to +150 °C Mounting Torque – 8 in.-lb. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction to Case R θJC 2.2 °C/W Thermal Resistance, Junction to Ambient R θJA 60 °C/W 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Order this document by MCR310/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA  Motorola, Inc. 1995 /C0077/C0067/C0082/C0051/C0049/C0048 /C0083/C0101/C0114/C0105/C0101/C0115 CASE 221A-04 (TO-220AB) STYLE 3 SCRs

10 AMPERES RMS

C G A K A G

2 Motorola Thyristor Device Data

  1. Ratings apply for negative gate voltage or RGK = 1 kΩ . Devices shall not have a positive gate voltage concurrently with a negative voltage

applied exceeds the rated blocking voltage.

  1. Does not include RGK current.

Figure 1. Average Current Derating Figure 2. On-State Power Dissipation Figure 3. Normalized Gate Current Figure 4. Gate Voltage

/C0077/C0067/C0082/C0051/C0049/C0048 /C0083/C0101/C0114/C0105/C0101/C0115 3Motorola Thyristor Device Data PACKAGE DIMENSIONS CASE 221A-04 (TO–220AB) NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. STYLE 3: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.014 0.022 0.36 0.55 K 0.500 0.562 12.70 14.27 L 0.045 0.055 1.15 1.39 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 A K L V G D N Z H Q FB 1 2 3 –T– SEATING PLANE S R J U T C

/C0077/C0067/C0082/C0051/C0049/C0048 /C0083/C0101/C0114/C0105/C0101/C0115

4 Motorola Thyristor Device Data

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. MCR310/D /C0042/C0077/C0067/C0082/C0051/C0049/C0048/C0047/C0068/C0042