MCR25 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

1Motorola Thyristor Device Data /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0067/C0111/C0110/C0116/C0114/C0111/C0108/C0108/C0101/C0100 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114/C0115 /C0082/C0101/C0118/C0101/C0114/C0115/C0101 /C0066/C0108/C0111/C0099/C0107/C0105/C0110/C0103 /C0084/C0104/C0121/C0114/C0105/C0115/C0116/C0111/C0114/C0115 Designed primarily for half–wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half–wave, silicon gate–controlled devices are needed.

  • Blocking Voltage to 800 Volts
  • On-State Current Rating of 25 Amperes RMS
  • High Surge Current Capability — 300 Amperes
  • Industry Standard TO–220AB Package for Ease of Design
  • Glass Passivated Junctions for Reliability and Uniformity MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Parameter Symbol Value Unit Peak Repetitive Off-State Voltage (1) Peak Repetitive Reverse Voltage (TJ = –40 to 125°C) MCR25D MCR25M MCR25N VDRM VRRM 400 600 800 Volts On-State RMS Current (All Conduction Angles) IT(RMS) 25 A Peak Non-repetitive Surge Current (One Half Cycle, 60 Hz, TJ = 125°C) ITSM 300 A Circuit Fusing Consideration (t = 8.3 ms) I2t 373 A2sec Peak Gate Power (Pulse Width ≤/n6368617200000000000000001.0 µs, TC = 80°C) PGM 20.0 Watts Average Gate Power (t = 8.3 ms, TC = 80°C) PG(AV) 0.5 Watts Peak Gate Current (Pulse Width ≤/n6368617200000000000000001.0 µs, TC = 80°C) IGM 2.0 A Operating Junction T emperature Range TJ –40 to +125 °C Storage Temperature Range Tstg –40 to +150 °C THERMAL CHARACTERISTICS Thermal Resistance — Junction to Case — Junction to Ambient R θJC R θJA 1.5 62.5 °C/W Maximum Lead T emperature for Soldering Purposes 1/8″ from Case for 5 Seconds TL 260 °C (1) VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Preferred devices are Motorola recommended choices for future use and best overall value. Order this document by MCR25/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA  Motorola, Inc. 1995 /C0077/C0067/C0082/C0050/C0053 /C0083/C0069/C0082/C0073/C0069/C0083 CASE 221A–06 (TO-220AB) Style 3 K A G SCRs

25 AMPERES RMS

*Motorola preferred devices A /C0042 REV 2

2 Motorola Thyristor Device Data

*Indicates Pulse T est: Pulse Width ≤ 2.0 ms, Duty Cycle ≤ 2%. Figure 1. Average Current Derating Figure 2. Maximum On–State Power Dissipation

4 Motorola Thyristor Device Data

Figure 9. Typical Exponential Static dv/dt Figure 10. Typical Exponential Static dv/dt Versus Junction Temperature. Figure 11. Maximum Non–Repetitive

1 CYCLE

/C0077/C0067/C0082/C0050/C0053 /C0083/C0069/C0082/C0073/C0069/C0083 5Motorola Thyristor Device Data PACKAGE DIMENSIONS CASE 221A–06 (TO-220AB) STYLE 3: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 1 2 3 D SEATING PLANE–T– C ST U R J

/C0077/C0067/C0082/C0050/C0053 /C0083/C0069/C0082/C0073/C0069/C0083

6 Motorola Thyristor Device Data

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, T oshikatsu Otsuki, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 MCR25/D /C0042/C0077/C0067/C0082/C0050/C0053/C0047/C0068/C0042