MCR220-5 DIGITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
144 Market Street
phone +1.908.245-7200 fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130128 MCR220-5, MCR220-7, MCR220-9 SILICON CONTROLLED RECTIFIER Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Value Unit Peak repetitive forward and reverse blocking voltage(1) (TJ = -40 to +125°C) MCR220-5 MCR220-7 MCR220-9 V RRM, VDRM 300 500 700 Volts On state RMS current (all conduction angles, TC = 90°C) IT(RMS)
12 Amps
Peak non-repetitive surge current (1/2 cycle, 60Hz, sine wave, TJ = 125°C) ITSM
100 Amps
Circuit fusing considerations (t = 8.3ms, TJ = -40 to +125°C) I2t 40 A2s Forward peak gate power P GM 20 Watts Forward average gate power P G(AV) 0.5 Watts Forward peak gate current IGM 2 Amps Operating junction temperature range TJ -40 to +125 °C Storage temperature range Tstg -40 to +150 °C Note 1: VDRM and VRRM for all types can be applied on a continuous basis without incurring damage. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. THERMAL CHARACTERISTICS Characteristic Symbol Maximum Unit Thermal resistance, junction to case RӨJC 2.0 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min. Typ. Max. Unit OFF CHARACTERISTICS Peak forward or reverse blocking current (VAK = Rated VDRM or VRRM, gate open) TJ = 25°C TJ = 125°C IDRM or IRRM 2.0 µA mA ON CHARACTERISTICS Peak forward on-state voltage TM = 24A peak) VTM 1.7
2.2 Volts
Gate trigger current (continuous dc) D = 12 Vdc, RL = 100 Ω) IGT 5.0 30 mA Gate trigger voltage (continuous dc) D = 12 Vdc, RL = 100 Ω) VGT 0.7
1.5 Volts
D = Rated VDRM, RL = 100 Ω, TJ = 125°C) VGD 0.2 - Volts Holding current (VD = 12Vdc) IH 6.0 40 mA Turn on time (ITM = 12A, IGT = 40mAdc, VD = rated VDRM) tgt 1.0 2.0 µs
phone +1.908.245-7200 MCR220-5, MCR220-7, MCR220-9 SILICON CONTROLLED RECTIFIER Characteristic Symbol Min. Typ. Max. Unit Turn-off time (VD = rated VDRM) (ITM = 12A, IR = 12A) (ITM = 12A, IR = 12A, TJ = 125°C) tq µs DYNAMIC CHARACTERISTICS Critical rate of rise of off-state voltage exponential D = rated VDRM, TJ = 125°C) dv/dt - V/µs MECHANICAL CHARACTERISTICS Case TO-220AB Marking Body painted, alpha-numeric Pin out See below TO-220AB Inches Millimeters Min Max Min Max A 0.575 0.620 14.600 15.750 B 0.380 0.405 9.650 10.290 C 0.160 0.190 4.060 4.820 D 0.025 0.035 0.640 0.890 F 0.142 0.147 3.610 3.730 G 0.095 0.105 2.410 2.670 H 0.110 0.155 2.790 3.930 J 0.014 0.022 0.360 0.560 K 0.500 0.562 12.700 14.270 L 0.045 0.055 1.140 1.390 N 0.190 0.210 4.830 5.330 Q 0.100 0.120 2.540 3.040 R 0.080 0.110 2.040 2.790 S 0.045 0.055 1.140 1.390 T 0.235 0.255 5.970 6.480 U - 0.050 - 1.270 V 0.045 - 1.140 - Z - 0.080 - 2.030 fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130128
phone +1.908.245-7200 MCR220-5, MCR220-7, MCR220-9 SILICON CONTROLLED RECTIFIER fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130128
phone +1.908.245-7200 MCR220-5, MCR220-7, MCR220-9 SILICON CONTROLLED RECTIFIER fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130128
phone +1.908.245-7200 MCR220-5, MCR220-7, MCR220-9 SILICON CONTROLLED RECTIFIER fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130128