MCR22 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

1Motorola Thyristor Device Data /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0067/C0111/C0110/C0116/C0114/C0111/C0108/C0108/C0101/C0100 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114/C0115 . . . designed and tested for repetitive peak operation required for CD ignition, fuel ignitors, flash circuits, motor controls and low-power switching applications.

  • 150 Amperes for 2 µs Safe Area
  • High dv/dt
  • Very Low Forward “On” Voltage at High Current
  • Low-Cost TO-226AA (TO-92) MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Symbol Value Unit Peak Repetitive Forward and Reverse Blocking Voltage (RGK = IK, TJ = 25 to 125°C) MCR22-2 MCR22-3 MCR22-4 MCR22-6 MCR22-8 VDRM , VRRM 100 200 400 600 Volts On-State Current RMS (All Conduction Angles) IT(RMS) 1.5 Amps Peak Non-repetitive Surge Current, TA = 25°C (1/2 Cycle, Sine Wave, 60 Hz) ITSM 15 Amps Circuit Fusing Considerations (t = 8.3 ms) I2t 0.9 A2s Peak Gate Power, TA = 25°C PGM 0.5 Watt Average Gate Power, TA = 25°C PG(AV) 0.1 Watt Peak Forward Gate Current, TA = 25°C (300 µs, 120 PPS) IFGM 0.2 Amp Peak Reverse Gate Voltage VRGM 5 Volts Operating Junction T emperature Range @ Rated VRRM and VDRM TJ –40 to +125 °C Storage Temperature Range Tstg –40 to +150 °C Lead Solder T emperature (Lead Length /C0113 1/16/C0073 from case, 10 s Max) — +230 °C 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Order this document by MCR22-2/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA  Motorola, Inc. 1995 /C0077/C0067/C0082/C0050/C0050/C0262/C0050 /C0116/C0104/C0114/C0117 /C0077/C0067/C0082/C0050/C0050/C0262/C0056 CASE 29-04 (TO-226AA) STYLE 10 SCRs

1.5 AMPERES RMS

K G A K G A

/C0077/C0067/C0082/C0050/C0050/C0262/C0050 /C0116/C0104/C0114/C0117 /C0077/C0067/C0082/C0050/C0050/C0262/C0056

2 Motorola Thyristor Device Data

Characteristic Symbol Max Unit Thermal Resistance, Junction to Case R θJC 50 °C/W Thermal Resistance, Junction to Ambient R θJA 160 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted. RGK = 1000 Ohms.) Characteristic Symbol Min Typ Max Unit Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM ) T C = 25°C TC = 125°C IDRM , IRRM 200 µA µA Forward “On” Voltage (ITM = 1 A Peak) VTM — 1.2 1.7 Volts Gate Trigger Current (Continuous dc)(1) TC = 25°C (Anode Voltage = 6 Vdc, RL = 100 Ohms) T C = –40°C IGT — 200 500 µA Gate Trigger Voltage (Continuous dc) T C = 25°C (Anode Voltage = 7 Vdc, RL = 100 Ohms) T C = –40°C (Anode Voltage = Rated VDRM , RL = 100 Ohms) T C = 125°C VGT VGD 0.1 0.8 1.2 Volts Holding Current T C = 25°C (Anode Voltage = 12 Vdc) T C = –40°C IH — mA Forward Voltage Application Rate (TC = 125°C) dv/dt — 25 — V/µs 1. RGK Current Not Included in Measurement. T , MAXIMUM ALLOWABLEA AMBIENT TEMPERATURE ( C)° T , MAXIMUM ALLOWABLEC CASE TEMPERATURE ( C)° dc dc IT(AV), AVERAGE ON-STATE CURRENT (AMPS) 120 1.0 100 140 IT(AV), AVERAGE ON-STATE CURRENT (AMP) CURRENT DERATING FIGURE 2 — MAXIMUM AMBIENT TEMPERATURE 100 1.6 140 FIGURE 1 — MAXIMUM CASE TEMPERA TURE α = CONDUCTION ANGLE α = 180° α = CONDUCTION ANGLE α = 180°

/C0077/C0067/C0082/C0050/C0050/C0262/C0050 /C0116/C0104/C0114/C0117 /C0077/C0067/C0082/C0050/C0050/C0262/C0056

4 Motorola Thyristor Device Data

P MAXIMUM AVERAGE POWER DISSIP ATION (WATTS)(AV) I , HOLDING CURRENT (mA)H V , GATE TRIGGER VOL TAGE (VOL TS)G I GATE TRIGGER CURRENT (GT µ 0.4 0.5 0.6 0.7 0.8 100 0.3 –75 –50 0 25 75 50 125–25 TJ, JUNCTION TEMPERATURE ( °C) FIGURE 5 — GATE TRIGGER VOLTAGE VAK = 7.0 V R L = 100 80200 160 1401201006040 TJ, JUNCTION TEMPERATURE ( °C) FIGURE 7 — HOLDING CURRENT 1.0 5.0 2.0 –40 –20 VAK = 12 V R L = 100 Ω 140 1.0 2.0 3.0 5.0 0–40 –20 20 40 60 80 100 120 100 160 TJ JUNCTION TEMPERATURE ( °C) FIGURE 6 — TYPICAL GATE TRIGGER CURRENT 1.8 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 2.0 0.2 0.6 FIGURE 8 — POWER DISSIP ATION IT(AV), AVERAGE ON-STATE CURRENT (AMPS) 1.61.20.40 dc 1.4 120° 1.0 90° 0.8 180° 60°30° TYPICAL CHARACTERISTICS

/C0077/C0067/C0082/C0050/C0050/C0262/C0050 /C0116/C0104/C0114/C0117 /C0077/C0067/C0082/C0050/C0050/C0262/C0056 5Motorola Thyristor Device Data PACKAGE DIMENSIONS CASE 29-04 (TO–226AA) STYLE 10: PIN 1. CATHODE 2. GATE 3. ANODE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. R A P J L F B K G H SECTION X–X CV D N N X X SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.175 0.205 4.45 5.20 B 0.170 0.210 4.32 5.33 C 0.125 0.165 3.18 4.19 D 0.016 0.022 0.41 0.55 F 0.016 0.019 0.41 0.48 G 0.045 0.055 1.15 1.39 H 0.095 0.105 2.42 2.66 J 0.015 0.020 0.39 0.50 N 0.080 0.105 2.04 2.66

/C0077/C0067/C0082/C0050/C0050/C0262/C0050 /C0116/C0104/C0114/C0117 /C0077/C0067/C0082/C0050/C0050/C0262/C0056

6 Motorola Thyristor Device Data

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. MCR22–2/D /C0042/C0077/C0067/C0082/C0050/C0050/C0045/C0050/C0047/C0068/C0042