MCR22 DIGITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
144 Market Street
phone +1.908.245-7200 fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130115 MCR22 SERIES SILICON CONTROLLED RECTIFIERS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Value Unit Peak repetitive off-state voltage(1) (RGK = 1K, TJ = -40 to +110°C, sine wave, 50 to 60Hz) MCR22-2 MCR22-3 MCR22-4 MCR22-5 MCR22-6 MCR22-7 MCR22-8 V DRM VRRM 100 200 300 400 500 600 V On-state RMS current (180° conduction angles, TC = 80°C) IT(RMS) 1.5 A Peak non-repetitive surge current (half-cycle, sine wave, 60Hz, TA = 25°C) ITSM 15 A Circuit fusing consideration (t = 8.3ms) I2t 0.9 A2s Forward peak gate power (pulse width ≤ 1.0µs, TA = 25°C) PGM 0.5 W Forward average gate power (t = 8.3ms, TA = 25°C) PG(AV) 0.1 W Forward peak gate current (pulse width ≤ 1.0µs, TA = 25°C) IGM 0.2 A Reverse peak gate voltage (pulse width ≤ 1.0µs, TA = 25°C) VRGM 5.0 V Operating temperature range @ rated VRRM and VDRM TJ -40 to +110 °C Storage temperature range Tstg -40 to +150 °C Note 1: VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. THERMAL CHARACTERISTICS Characteristic Symbol Maximum Unit Thermal resistance, junction to case RӨJC 50 °C/W Thermal resistance, junction to ambient RӨJA 160 °C/W Lead solder temperature (lead length ≥ 1/16” from case, 10s max) T L 260 °C ELECTRICAL CHARACTERISTICS (TC = 25°C, unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Peak forward or reverse blocking current (VAK = Rated VDRM or VRRM, RGK = 1000 Ω) TC = 25°C TC = 110°C IDRM, IRRM 200 µA ON CHARACTERISTICS Peak forward on-state voltage* (ITM = 1A) VTM 1.2 1.7 V Gate trigger current (continuous dc) (2) (VAK = 6V, RL = 100Ω) TC = 25°C TC = -40°C IGT 200 500 µA Gate trigger voltage (continuous dc) (2) (VAK = 7V, RL = 100Ω) TC = 25°C TC = -40°C VGT 0.8 1.2 V
phone +1.908.245-7200 MCR22 SERIES SILICON CONTROLLED RECTIFIERS Gate non-trigger voltage* (VAK = 12V, RL = 100Ω, TC = 110°C) VGD 0.1 - V Holding current (VAK = 12V, gate open, initiating current = 200mA) TC = 25°C TC = -40°C IH 2.0 5.0 mA DYNAMIC CHARACTERISTICS Critical rate of rise of off-state voltage (TC = 110°C) dv/dt - 25 - V/µs * Pulse width ≤ 1.0ms, duty cycle ≤ 1%. Note 2: RGK current not included in measurement. MECHANICAL CHARACTERISTICS Case TO-92 Marking Alpha-numeric Pin out See below fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130115
phone +1.908.245-7200 MCR22 SERIES SILICON CONTROLLED RECTIFIERS fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130115
phone +1.908.245-7200 MCR22 SERIES SILICON CONTROLLED RECTIFIERS fax +1.908.245-0555 sales@digitroncorp.com www.digitroncorp.com Rev. 20130115