MCR218FP MOTOROLA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
1Motorola Thyristor Device Data /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0067/C0111/C0110/C0116/C0114/C0111/C0108/C0108/C0101/C0100 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114/C0115 Reverse Blocking Thyristors . . . designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits.
- Glass Passivated Junctions with Center Gate Fire for Greater Parameter Uniformity and Stability
- Small, Rugged, Thermowatt Constructed for Low Thermal Resistance, High Heat Dissipation and Durability
- Blocking Voltage to 800 Volts
- 80 A Surge Current Capability
- Insulated Package Simplifies Mounting MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Symbol Value Unit Peak Repetitive Forward and Reverse Blocking Voltage(1) (TJ = –40 to +125°C, Gate Open) MCR218-2FP MCR218-4FP MCR218-6FP MCR218-8FP MCR218-10FP VDRM VRRM 200 400 600 800 Volts On-State RMS Current (TC = +70°C) Full Cycle Sine Wave 50 to 60 Hz(2) IT(RMS) 8 Amps Peak Nonrepetitive Surge Current (One Full Cycle, 60 Hz, TC = +70°C) Preceded and followed by rated current ITSM 80 Amps Circuit Fusing (t = 8.3 ms) I2t 26 A2s Peak Gate Power (TC = +70°C, Pulse Width = 10 µs) PGM 5 Watts Average Gate Power (TC = +70°C, t = 8.3 ms) PG(AV) 0.5 Watt Peak Gate Current (TC = +70°C, Pulse Width = 10 µs) IGM 2 Amps RMS Isolation Voltage (TA = 25°C, Relative Humidity /C0112 20%) V(ISO) 1500 Volts Operating Junction T emperature TJ –40 to +125 °C Storage Temperature Range Tstg –40 to +125 °C 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. 2. The case temperature reference point for all TC measurements is a point on the center lead of the package as close as possible to the plastic body. Order this document by MCR218FP/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA Motorola, Inc. 1995 /C0077/C0067/C0082/C0050/C0049/C0056/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115 CASE 221C-02 STYLE 2 ISOLATED SCRs
8 AMPERES RMS
K G A
2 Motorola Thyristor Device Data
- Pulse Test: Pulse Width = 1 ms, Duty Cycle /C0112 2%.
Figure 1. Current Derating Figure 2. On-State Power Dissipation
1 CYCLE
Figure 3. Maximum On-State Characteristics Figure 5. Characteristics and Symbols Figure 4. Maximum Non-Repetitive Surge Current Figure 6. Thermal Response
4 Motorola Thyristor Device Data
Figure 9. Holding Current versus Temperature Figure 7. Gate Trigger Current versus Temperature Figure 8. Gate Trigger Voltage versus Temperature
/C0077/C0067/C0082/C0050/C0049/C0056/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115 5Motorola Thyristor Device Data PACKAGE DIMENSIONS CASE 221C-02 1 2 3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. LEAD DIMENSIONS UNCONTROLLED WITHIN DIMENSION Z. –Y– –B– –T– Q P A K H Z G L F D 3 PL MBM0.25 (0.010) Y E N S J R C SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.680 0.700 17.28 17.78 B 0.388 0.408 9.86 10.36 C 0.175 0.195 4.45 4.95 D 0.025 0.040 0.64 1.01 E 0.340 0.355 8.64 9.01 F 0.140 0.150 3.56 3.81 G 0.100 BSC 2.54 BSC H 0.110 0.155 2.80 3.93 J 0.018 0.028 0.46 0.71 K 0.500 0.550 12.70 13.97 L 0.045 0.070 1.15 1.77 P 0.270 0.290 6.86 7.36 Q 0.480 0.500 12.20 12.70 R 0.090 0.120 2.29 3.04 S 0.105 0.115 2.67 2.92 Z 0.070 0.090 1.78 2.28 STYLE 2: PIN 1. CATHODE 2. ANODE 3. GATE
/C0077/C0067/C0082/C0050/C0049/C0056/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115
6 Motorola Thyristor Device Data
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. MCR218FP/D /C0042/C0077/C0067/C0082/C0050/C0049/C0056/C0070/C0080/C0047/C0068/C0042