MCR30W105K1HL5L-RH MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Page <1> V1.013/04/20 Radial Leaded, Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Item NP0 / C0G X7R Z5U Y5V Dielectric Type Stable Class I Dielectric Stable Class II Dielectric Electrical Properties With negligible depend- ence of electrical proper- ties on temperature, voltage, frequency and time. With negligible change of properties with temperature, voltage. Frequency and time, this dielectric is ferroelectric and offers higher capacitance ranges than class I With higher dielectric constant and greater variation of properties with temperature and test conditions, very high capacitance per unit volume and suited for bypass and coupling application as well as filtering, transient suppression blocking, and charge storage application. Application Used in circuits requiring stable performance, such as temperature compen- sation circuits and smite circuits. Used as blocking, coupling, By-Passing frequency and discrimination elements. Suited for By-passing and coupling application such as store power and memory circuit. Operating Temperature -55°C to +125°C +10°C to +85°C -30°C to +85°C Temperature Coefficient 0±30ppm/°C ±15% +22% to -56% +22% to -82% Inspection Norm Capacitance (C) Test Frequency: =1000pF=1MHz >1000pF=1kHz Test Frequency: 1kHz Test Voltage: 1 ±0.2Vrms Test Voltage: 0.5 ±0.1Vrms Test Voltage: 1 ±0.2Vrms In the tolerance: C=±0.25pF D=±0.5pF J=±5pF In the tolerance: J=±5pF K=±10pF M=±20pF In the tolerance: M=±20% Z=+80% / -20% Dissipation Factor (DF) Test Frequency: =1000pF=1MHz >1000pF=1kHz Test Frequency: 1kHz Test Voltage: 1 ±0.2Vrms Test Voltage: 0.5 ±0.1Vrms Test Voltage: 1 ±0.2Vrms 25V, 16V is <3.5% 4% 100V, 50V is <5% 25V, 16V is <7% Insulation Resistance Ir Test Voltage: Rated Voltage Whichever is less: =100GΩ or =1000MΩ×µf Whichever is less: =10GΩ or =100MΩ×µf Voltage (TV) 2.5 × Rated Voltage
Page <2> V1.013/04/20 Radial Leaded, Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Reliability Item Test Methods Test Specifications Solderability The lead wire of a capacitor shall be dipped into a rasin and then into molten solder of 235±5°C for 5 seconds, in both cases the depth of dipping is up to about 2.5mm to 3mm from the root of lead wires. Lead wire shall be soldered with uniformly coated on the Axial or Radial direction over 75% of circumferential direction Resistance to Soldering heat The lead wire shall be immersed into melted solder of 265 ±5°C, up to about 2.5mm to 3mm from the main body and the specified items shall be measured after leaving for 24±2hours. 1. Appearance: No marked defect 2. Capacitance Change (C/C) NP0 / C0G X7R Z5U Y5V C/C =±0.5% or ±0.5pF =±7.5% =±20% =±20% Life Test Condition NP0 X7R Z5U Y5V Temperature +125°C +85°C Time 1000 Hours Voltage 1.5 × (Rated Voltage Applied) Recovery Time 24 ±2 Hours 1. Appearance: No marked defect 2. Change Value: NP0 / C0G X7R Z5U Y5V C/C =±2% or DF =±1.5 × Initial requirement IR =±0.25 × Initial requirement Strength of Lead Fix the body of capacitor, apply a tensile weight gradually to each lead. Pull: Axial: >3kg Radial: >1kg Diagram Part Number Dimensions (mm) W T H F L MCR15N101J2AL2L-RH 2.5 ±0.25 5 ±0.5 MCR15N221J1HL2L-RH MCR15W103K2AL2L-RH MCR20N102J1HL5L-RH 5 3/3.8 5 MCR30W105K1HL5L-RH 7.6 3.8 7.6 5 ±0.5 MCR30Z105M1HL5L-RH
Page <3> V1.013/04/20 Radial Leaded, Multilayer Ceramic Capacitors Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Specification Table Part Number Working Voltage (WV DC) Capacitance Dielectric Tolerance (%) MCR15N101J2AL2L-RH 100 100pF NP0 5 MCR15N221J1HL2L-RH 50 220pF NP0 5 MCR15W103K2AL2L-RH 100 0.01mF X7R 10 MCR20N102J1HL5L-RH 50 1000pF NP0 5 MCR30W105K1HL5L-RH 50 1mF X7R 10 MCR30Z105M1HL5L-RH 50 1mF Z5U 20