MCR2080 DIGITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
144 Market Street
phone +1.908.245-7200 MCR2080(A) SERIES SILICON CONTROLLED RECTIFIERS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Value Unit Repetitive peak off-state voltage(1) Peak repetitive reverse voltage MCR2080(A)-4 MCR2080(A)-5 MCR2080(A)-6 MCR2080(A)-7 MCR2080(A)-8 MCR2080(A)-9 MCR2080(A)-10 V RRM VDRM 200 300 400 500 600 700 800 Volts Forward current RMS (all conduction angles) IT(RMS) 8.0 Amps Peak forward surge current (1/2 cycle, sine wave, 60 Hz) ITSM 90 Amps Circuit fusing considerations (t = 8.3ms) I2t 34 A2s Forward peak gate power PGM 5.0 Watts Forward average gate power PG(AV) 0.5 Watts Operating junction temperature range TJ -40 to +125 °C Storage temperature range Tstg -40 to +150 °C Note 1: VRRM for all types can be applied on a continuous dc basis without incurring damage. Ratings apply for zero or negative gate voltage. Devices should not be tested for blocking capability in a manner such that the voltage supplied exceeds the rated blocking voltage. THERMAL CHARACTERISTICS Characteristic Symbol Maximum Unit Thermal resistance, junction to case RӨJC 2.0 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ. Max Unit Peak forward blocking current (Rated V DRM @ TJ = 125°C) IDRM 3.0 mA Peak reverse blocking current (Rated VRRM @ TJ = 125°C) IRRM 3.0 mA Peak on-state voltage(2) (ITM = 10A peak) (ITM = 16A peak) VTM 3.0 4.0 Volts Gate trigger current (continuous dc) (VD = 7.0V, RL = 100Ω) IGT 50 mA Gate trigger voltage (continuous dc) (VD = 7.0V, RL = 100Ω) VGT
2.5 Volts
D = 7.0V, RL = 100Ω) IH 100 mA Turn-off time (VDRM = rated voltage) (ITM = 5.0A, di/dt = 5.0A/µs, reapplied dv/dt = 50V/µs) MCR2080 MCR2080A tq 6.0 µs Forward voltage application rate dv/dt 100 150 - V/µs Note 2: Pulse test: pulse width = 1.0ms, duty cycle ≤ 2%. sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130128
phone +1.908.245-7200 MCR2080(A) SERIES SILICON CONTROLLED RECTIFIERS MECHANICAL CHARACTERISTICS Case TO-220AB Marking Alpha-numeric Pin out See below TO-220AB Inches Millimeters Min Max Min Max A 0.575 0.620 14.600 15.750 B 0.380 0.405 9.650 10.290 C 0.160 0.190 4.060 4.820 D 0.025 0.035 0.640 0.890 F 0.142 0.147 3.610 3.730 G 0.095 0.105 2.410 2.670 H 0.110 0.155 2.790 3.930 J 0.014 0.022 0.360 0.560 K 0.500 0.562 12.700 14.270 L 0.045 0.055 1.140 1.390 N 0.190 0.210 4.830 5.330 Q 0.100 0.120 2.540 3.040 R 0.080 0.110 2.040 2.790 S 0.045 0.055 1.140 1.390 T 0.235 0.255 5.970 6.480 U - 0.050 - 1.270 V 0.045 - 1.140 - Z - 0.080 - 2.030 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130128
phone +1.908.245-7200 MCR2080(A) SERIES SILICON CONTROLLED RECTIFIERS sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130128