MCR100 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1Motorola Thyristor Device Data /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0067/C0111/C0110/C0116/C0114/C0111/C0108/C0108/C0101/C0100 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114/C0115 Reverse Blocking Triode Thyristors PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA package which is readily adaptable for use in automatic insertion equipment.

  • Sensitive Gate Trigger Current — 200 µA Maximum
  • Low Reverse and Forward Blocking Current — 100 µA Maximum, TC = 125°C
  • Low Holding Current — 5 mA Maximum
  • Glass-Passivated Surface for Reliability and Uniformity MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Symbol Value Unit Peak Repetitive Forward and Reverse Blocking Voltage(1) (TJ = 25 to 125°C, RGK = 1 kΩ MCR100-3 MCR100-4 MCR100-6 MCR100-8 VDRM and VRRM 100 200 400 600 Volts Forward Current RMS (See Figures 1 & 2) (All Conduction Angles) IT(RMS) 0.8 Amps Peak Forward Surge Current, TA = 25°C (1/2 Cycle, Sine Wave, 60 Hz) ITSM 10 Amps Circuit Fusing Considerations (t = 8.3 ms) I2t 0.415 A2s Peak Gate Power — Forward, TA = 25°C PGM 0.1 Watts Average Gate Power — Forward, TA = 25°C PGF(AV) 0.01 Watt Peak Gate Current — Forward, TA = 25°C (300 µs, 120 PPS) IGFM 1 Amp Peak Gate Voltage — Reverse VGRM 5 Volts Operating Junction T emperature Range @ Rated VRRM and VDRM TJ –40 to +125 °C Storage Temperature Range Tstg –40 to +150 °C Lead Solder T emperature (/C0116 1/16/C0073 from case, 10 s max) — +230 °C 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Preferred devices are Motorola recommended choices for future use and best overall value. Order this document by MCR100/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA  Motorola, Inc. 1995 /C0077/C0067/C0082/C0049/C0048/C0048 /C0083/C0101/C0114/C0105/C0101/C0115 SCRs

0.8 AMPERE RMS

*Motorola preferred devices CASE 29-04 (TO-226AA) STYLE 10 K G A K G A /C0042

/C0077/C0067/C0082/C0049/C0048/C0048 /C0083/C0101/C0114/C0105/C0101/C0115

2 Motorola Thyristor Device Data

Characteristic Symbol Max Unit Thermal Resistance, Junction to Case R θJC 75 °C/W Thermal Resistance, Junction to Ambient R θJA 200 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C, RGK = 1 kΩ unless otherwise noted.) Characteristic Symbol Min Max Unit Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM ) T C = 25°C TC = 125°C IDRM , IRRM 100 µA µA Forward “On” Voltage(1) (ITM = 1 A Peak @ TA = 25°C) VTM — 1.7 Volts Gate Trigger Current (Continuous dc)(2) TC = 25°C (Anode Voltage = 7 Vdc, RL = 100 Ohms) IGT — 200 µA Gate Trigger Voltage (Continuous dc) T C = 25°C (Anode Voltage = 7 Vdc, RL = 100 Ohms) T C = –40°C (Anode Voltage = Rated VDRM , RL = 100 Ohms) T C = 125°C VGT — 0.1 0.8 1.2 Volts Holding Current T C = 25°C (Anode Voltage = 7 Vdc, initiating current = 20 mA)TC = –40°C IH — mA 1.Forward current applied for 1 ms maximum duration, duty cycle /C0112 1%. 2. RGK current is not included in measurement. C °T , MAXIMUM ALLOWABLE CASE TEMPERATURE ( C) 60° 120° 180° 0.4 100 110 0 0.1 0.3 0.2 120 0.5 α = 30° 90° dc CASE MEASUREMENT POINT — CENTER OF FLAT PORTION IT(AV), AVERAGE ON-STATE CURRENT (AMP) α FIGURE 1 – MCR100-7, MCR100-8 CURRENT DERATING (REFERENCE: CASE TEMPERATURE) α = CONDUCTION ANGLE °TEMPERATURE ( C) A α IT(AV), AVERAGE ON-STATE CURRENT (AMP) 0.40 0.1 0.3 0.2 α = 30° 120° 100 120 FIGURE 2 – MCR100-7, MCR100-8 CURRENT DERATING (REFERENCE: AMBIENT TEMPERATURE) T , MAXIMUM ALLOWABLE AMBIENT 60° 90° TYPICAL PRINTED CIRCUIT BOARD MOUNTING α = CONDUCTION ANGLE 180° dc

/C0077/C0067/C0082/C0049/C0048/C0048 /C0083/C0101/C0114/C0105/C0101/C0115 3Motorola Thyristor Device Data PACKAGE DIMENSIONS CASE 29-04 (TO–226AA) NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. R A P J L F B K G H SECTION X–X CV D N N X X SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.175 0.205 4.45 5.20 B 0.170 0.210 4.32 5.33 C 0.125 0.165 3.18 4.19 D 0.016 0.022 0.41 0.55 F 0.016 0.019 0.41 0.48 G 0.045 0.055 1.15 1.39 H 0.095 0.105 2.42 2.66 J 0.015 0.020 0.39 0.50 N 0.080 0.105 2.04 2.66 STYLE 10: PIN 1. CATHODE 2. GATE 3. ANODE

/C0077/C0067/C0082/C0049/C0048/C0048 /C0083/C0101/C0114/C0105/C0101/C0115

4 Motorola Thyristor Device Data

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. MCR100/D /C0042/C0077/C0067/C0082/C0049/C0048/C0048/C0047/C0068/C0042