MCR-1-16 COOPER | Alldatasheet
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Description
- Axial Leaded
- Fast Acting, Solid Matrix Construction
- High Temperature Thermoplastic Body, UL 94 VO
- Tin-lead plated copper Lead Wires, .025" diameter Agency Information
- UL Recognition Guide & File Numbers: JDYX2 & E19180
- CSA Certification File & Class Numbers: 053787 C 00 & 1422 30 (0 - 1/8A); 053787 C 00 & 1422 01 (1/4A - 8A) Ordering
- Specify product code and packaging code Environmental Data
- Life Test: 2000 hours at 80% rated current, 55°C
- Moisture Resistance: MIL-STD-202, Method 106, 90% relative humidity at 65°C.
- Operating Temperature: -55°C to 125°C with proper fuse derating
- Resistance to Soldering Heat: MIL-STD-202, Method 210, Test Condition C (260°C)
- Salt Spray: MIL-STD-202, Method 101, Test Condition B
- Shock: MIL-STD-202, Method 213, Test Condition I, 100G’s for 6 milliseconds
- Solderability: MIL-STD-202, Method 208
- Terminal Strength: MIL-STD-202, Method 211, Test Condition A, will withstand 7 lb. axial pull test.
- Thermal Shock: MIL-STD-202, Method 107, Test Condition B, -65°C to 125°C
- Thermal Cycle: EIA-STD-RS-186-C, Test Condition A, -55°C to 85°C
- Vibration: MIL-STD-202, Method 204, Test Condition C, (55 to 2000 HZ, 10G’s peak)
- Wave Soldering: Maximum reservoir temperature 260°C, 10 second maximum exposure, .125" from body. 1.13" 28.58mm .297" 7.54mm .12" 3.10mm .025" 0.64mm 1.13" 28.58mm *All tolerances: ±0.13mm ±0.005" Dimensions mm⁄(inches) Subminiature Through Hole MCR Series, Fast Acting, Solid Matrix
ELECTRICAL CHARACTERISTICS
% of Amp Rating (0-10A) Opening Time 100% 4 hours minimum 250% 5 seconds maximum SPECIFICATIONS Rated Interrupting Pre-arching 2 Typical Total Clearing2 Typical Voltage Product Voltage Rating 1 I2t (A2sec) I 2t (A2sec) Drop Volts at Code AC DC AC DC AC DC AC DC 100% Rated 1. Interrupting ratings were measured at 100% (1/16 to 5) and 100% (7, 10) power factors on AC, and a time constant less than 1 ms. on DC. 2. I2t was measured at 50 amps 125 VAC, .95PF , (random closing angle) and 300 amps 125 VDC, TC <1ms. for 1/16 through 5 amps and 50 amps 60 VAC, .95PF , (random closing angle), and 300 amps 90 VDC, TC <1ms. for the 7 and 10 amp fuses. NOTE: All values shown above are typical.
- Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recomme nded, with further derating required at elevated ambient temperatures. OBSOLETE- Recommended replacement with MCRW, Data Sheet 4074 - OBSOLETE
0210 BU-SB10142 Page 1 of 2 Data Sheet 2003
1.0 1.5 2.0 2.5 4.0 5.0 7.010.0 3.0 CURRENT IN AMPERES .01 .001 TIME IN SECONDS 100 .01 TIME CURRENT CURVE Subminiature Through Hole MCR Series, Fast Acting, Solid Matrix Visit us on the Web at www.cooperET.com
3601 Quantum Boulevard Boynton Beach, Florida 33426-8638
Tel: +1-561-752-5000 Toll Free: +1-888-414-2645 Fax: +1-561-742-1178 This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Electronic Technologies also reserves the right to change or update, without notice, any technical informa tion contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. OC-2544 Rev. A 5/02 © Cooper Electronic Technologies 2002 PACKAGING CODE Packaging Code Description Blank 10 units BK 500 units TR 2,500 pieces on tape and reel per EIA-296, 52.4mm spacing OBSOLETE- Recommended replacement with MCRW, Data Sheet 4074 - OBSOLETE