MCN51-8S2-DS

MCN51-8S2-PFA HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

High Current, High Density, Power Connectors MCN51 Series NEW 2002.11 I Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection to the PCB (patents pending) The compliant section is designed to provide reliable and damage free connection with the Plated-Through-hole, reducing stresses to the PCB. 3. Multiple Contacts in a Variety of Configurations offered with 8, 16 and 30 contacts in vertical, right angle, solder and compliant press-fit terminations. 4. UL Recognized, CSA Certified UL File No. E52653 CSA File No. LR95109 I Applications Telecom, LAN and Data storage equipment, high-end servers, and a wide variety of power supply devices. Min.PCB thickness = 3.2 mm View of the Compliant Press-Fit section application Compliant section PCB

500 V DC

2000V AC applied /one minute

25 A DC

Frequency of 10 to 2,000 Hz, overall amplitude of 1.5 mm Or, acceleration of 196 m/s2 for 2 hours in each of 3 directions. Expose to a temperature of +125˚C for 96 hours. Expose to a temperature of -55˚C for 96 hours. (-55˚C: 30 minutes => 15 to 30˚C: 5 minutes max. => 125˚C: 30 minutes => 15 to 30˚C: 5 minutes max.) 20 cycles 56 days at temperature of 40 ç±2çand humidity of 90% to 95% 1500 hours at temperature of 85ç 1000 cycles Leave for 96 hours in an atmosphere of 25 ppm concentration sulfur dioxide gas. 5000M ohms min. No flashover or insulation breakdown. 3m ohms max. (initial value) No electrical discontinuity of 1 ms or more No damage, cracks, or parts dislocation. Contact resistance: 7m ohms max. Contact resistance: 7m ohms max. Contact resistance: 7m ohms max. Insulation resistance: 5000M ohms min. No damage, cracks, or parts dislocation. Contact resistance: 7m ohms max. Insulation resistance: 5000 M ohms min. Contact resistance: 7m ohms max. Contact resistance: 7m ohms max. Contact resistance: 7m ohms max. 11.Insulation resistance 12.Withstanding voltage 13.Contact resistance 14.Vibration 15.Heat resistance 16.Cold resistance 17.Temperature cycle 18.Humidity resistance 19.High temperature exposure 10.Operating life 11.Sulfur dioxide gas Ratings Operating temperature range -55˚C to +125˚C (Note 2) Operating humidity level Relative humidity 95% max. (provided there is no condensation) Current rating 27 A max. (Note 1) Voltage rating

600 V AC

-10˚C to +60˚C (Note 3) Storage humidity range 40% to +70% I Product Specifications Item Specification Conditions Note1: Refer to "Current-Temperature De-rating Curve" (IEC 512-3, Test 5b) and "Temperature Rise Curve" (IEC 512-3 Test 5a) on Page 3. Note2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. I Materials Product Pin headers Receptacles Part Material Finish Remarks Insulator Contacts Insulator Contacts PBT Copper alloy PBT Copper alloy Black Gold plating Black Gold plating UL94V-0 UL94V-0 I Ordering Information MCN 51 - 30 P 3 - DS 1 3 42 5 Series name : MCN51 Number of contacts : 8, 16, 30 Connector type P : Pin header S : Socket Receptacle Rows 2 : 2 rows 3 : 3 rows Contact type PFA : Press-fit (through-hole diameter 2.03 mm) DS : Right-angle through-hole type

Measurements were made with 12 AWG wire connected in series to all contacts. Measurements were made with 12 AWG wire connected in series to all contacts. BCurrent - Temperature De-rating Curve BTemperature Rise Curve G (IEC 512-3, Test 5a) G (IEC 512-3, Test 5b) Current Flow (A) Ambient Temperature (˚C) MCN51 Series De-rating Curve (Base Line) MCN51 Series Temperature Rise Curve Current Flow (A) Temperature Rise (˚C)

5±0.05 10±0.05 63.65 20.37 PBT 8 9 A 2 4 5 6 7 10 3 57.45 5.84 15.246.35 Ø1.93 I Receptacle: Straight, Press-Fit G 2-row type G 3-row type Fasten to the board being sure to use (American type) #2 tapping screws. Recommended Through-Hole Diameter Finished hole : 2.03 dia. ± 0.05 mm Drill diameter : 2.185 dia. ± 0.025 mm Copper plating thickness : 70 ± 10 µm Solder plating thickness : 5 to10 µm Board thickness : 3.2 mm min. Fasten to the board being sure to use (American type) #2 tapping screws. Recommended Through-Hole Diameter Finished hole : 2.03 dia. ± 0.05 mm Drill diameter : 2.185 dia. ± 0.025 mm Copper plating thickness : 70 ± 10 µm Solder plating thickness : 5 to10 µm Board thickness : 3.2 mm min. 9 10 11 12 13 14 15 16 1 2 4 5 6 7 83 P B T A B 15.39 Ø1.93C 6.35 5.84 15.24 A C±0.1 2-(Ø2.54) 5±0.05 B±0.05 5±0.05 D-Ø2.03±0.05 5±0.05 45±0.1 5±0.05 10±0.05 30- Ø2.03 ±0.05 2-( Ø2.54 57.45 ±0.1 CL No. No. of ContactsPart Number 589-0196-0 30MCN51-30S3-PFA Part Number CL No. MCN51-8S2-PFA MCN51-16S2-PFA A B C No.of Contacts(D ) 33.63 53.64 27.43 47.45 589-0200-6 589-0199-9 PCB mounting pattern PCB mounting pattern

55 · 5 ±0.05 10±0.05 2.49 7.87 2-Ø2.54 57.45 26.82 15.24 20.37 63.65 3.71 1234567891 0 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 PBT A I Pin Header: Right-Angle Through-hole G 2-row type G 3-row type 2.49 7.87 123 2-Ø2.54 8765 27.43 26.82 15.24 15.39 33.63 PBT A 3.7 5±0.05 15±0.15±0.05 1.02±0.1 5 ±0.05 45 ±0.1 5 ±0.05 10±0.05 57.45±0.2 2-( Ø3.1230- Ø2.03 ±0.05 CL No. No. of ContactsPart Number 589-0195-8 30MCN51-30P3-DS CL No. No. of ContactsPart Number 589-0202-1 8MCN51-8P2-DS PCB mounting pattern 2-( Ø3.12 1.02 ±0.1 5±0.05 15±0.15±0.05 Ø2.03 ±0.05 27.43±0.1 PCB mounting pattern

Ø1.93 7.87 47.45 15.3915.24 55.84 53.64 6.35 I Pin Header: Straight, Press-Fit G 2-row type Fasten to the board being sure to use (American type) #2 tapping screws. Recommended Through-Hole Diameter Finished hole : 2.03 dia. ± 0.05 mm Drill diameter : 2.185 dia. ± 0.025 mm 47.45±0.1 2-(Ø2.54 )5 ±0.05 35±0.05 5±0.05 16- Ø2.03 ±0.05 CL No. No. of ContactsPart Number 589-0201-9 16MCN51-16P2-PFA PCB mounting pattern Copper plating thickness : 70 ± 10 µm Solder plating thickness : 5 to10 µm Board thickness : 3.2 mm min.