MCL514BD MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Page <1> V1.018/09/19 Round LED Amber, 3mm Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Specifications: Dice Material : GaAsP on GaP Emitted Colour : Amber Lens Colour : Amber Diffused Peak Wavelength : 610nm Viewing Angle : 76° Luminous Intensity (IV) : 8.5mcd Parameter Symbol Minimum Typical Maximum Unit Test Luminous Intensity IV 4 8.5 13 mcd IF = 20mA Viewing Angle 2θ 1/2 - 76 - degrees Peak Emission Wavelength λP - 610 - nm Dominant Wavelength λD - 606 - - Spectral Line Half-Width Δλ - 40 - - Forward Voltage VF 1.7 2.1 2.6 V IF = 20mA Power Dissipation Pd - - 85 - - Peak Forward Current (Duty 1/10 at 1kHz) IF (Peak) - - 100 - - Recommended Operating Current IF (Rec) - 20 - mA - Electrical/Optical Characteristics at Ta = 25°C Reverse Voltage 5V Reverse Current 10μA (Vr = 5V) Operating Temperature Range -40°C to +85°C Storage Temperature Range -40°C to +100°C Lead Soldering Temperature Range 1.6mm (1/16 inch) from body 260°C for 5 Seconds Absolute Maximum Ratings (Ta = 25°C)
Page <2> V1.018/09/19 Round LED Amber, 3mm Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Amber (GaAsP/CaP λP = 610nm)
Page <3> V1.018/09/19 Round LED Amber, 3mm Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Description Part Number LED, 3mm, 70°, Amber MCL514BD Part Number Table Dimensions : Millimetres (Inches) Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.