MCL103GD MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.element14.com www.farnell.com www.newark.com Page <1> V1.008/11/13 LED, 10mm Electrical/Optical characteristics at Ta = 25°C Parameter Symbol Min. Type Max. Unit Test Luminous Intensity IV 40 80 120 mcd IF = 20mA Viewing Angle 2θ½ 35 Deg. IF = 20mA Peak Emission Wavelength λp 568 nm Dominant Wavelength λD 570 nm IF = 20mA Spectral Line Half-Width Δλ 30 nm Forward Voltage VF 1.7 2.1 2.6 V IF = 20mA Power Dissipation Pd 85 mW Peak Forward Current ( Duty1/10 @ 1kHz ) IF (Peak) 100 mA Recommended Operating Current IF (Rec) 20 mA Absolute Maximum Ratings : (Ta = 25°C) Reverse Voltage : 5 Volt Reverse Current : 10μA ( Vr = 5V ) Operating Temperature Range : -40°C to +85°C Storage Temperature Range : -40°C to +100°C Lead Soldering Temperature Range {1.6mm (1/16 inch) from body} : 260°C For 5 Seconds Reliability test For LED Lamps Item Test Conditions Test Time/Cycle Sample Size Ac/Re DC Operating Life Temperature : 25°C IF : 20mA 1,000 Hrs. 76 Pcs. 0/1 High Temperature High Humidity Temperature : 85°C 85%RH High Temperature Storage Temperature : 100°C Low Temperature Storage Temperature : -40°C Temperature Cycling 85°C~ 25°C~-35°C 15min~ 5min~ 15min
15 Cycles
Thermal Shock 85°C~ 25°C~-10°C 5min~ 10sec ~ 5min Solder Heat Temperature : 260°C ±5°C 10 Sec.
www.element14.com www.farnell.com www.newark.com Page <2> V1.008/11/13 LED, 10mm Typical Electro-Optical Characteristics Curves
www.element14.com www.farnell.com www.newark.com Page <3> V1.008/11/13 LED, 10mm Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. Part Number Table Description Part Number LED, 10mm, Green, 80mcd, 568nm MCL103GD Dimensions: All tolerance shall be ±0.01 inch (0.25mm) Dimensions : Inches (Millimetres)