MCK1214 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • 800 MHz Typical Bandwidth
  • Small Outline 8-Lead SOIC Package
  • 75 k Internal Input Pulldown Resistors
  • >1000 V ESD Protection
  • Pb−Free Package is Available For proper operation, the input edge rate of the R and V inputs should be less than 5.0 ns.

Figure 1. Logic Diagram

ORDERING INFORMATION

MCH12140D SOIC−8 98 Units/Rail MCH12140DR2 SOIC−8 2500 Tape & Reel ALYW x140 x = H or K A = Assembly Location L = Wafer Lot Y = Year W = Work Week V CC8U U D D R V VEE (Top View) MCK12140D SOIC−8 98 Units/Rail MCK12140DR2 SOIC−8 2500 Tape & Reel http://onsemi.com MCH12140DR2G SOIC−8 (Pb−Free)

2500 Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

MCH12140, MCK12140 http://onsemi.com TRUTH TABLE* Input Output Input Output R V U D U D R V U D U D X X X X X X X X X X X X X X X X *This is not strictly a functional table; i.e., it does not cover all possible modes of operation. However, it gives a sufficient number of tests to ensure that the device will function properly. H−SERIES DC CHARACTERISTICS (VEE = VEE (min) − VEE (max); VCC = GND (Note 1), unless otherwise noted.) Characteristic Symbol Min Max Min Max Min Max Min Max Unit Output HIGH Voltage VOH −1080 −890 −1020 −840 −980 −810 −910 −720 mV Output LOW Voltage VOL −1950 −1650 −1950 −1630 −1950 −1630 −1950 −1595 mV Input HIGH Voltage VIH −1230 −890 −1170 −840 −1130 −810 −1060 −720 mV Input LOW Voltage VIL −1950 −1500 −1950 −1480 −1950 −1480 −1950 −1445 mV Input LOW Current IIL 0.5 − 0.5 − 0.5 − 0.3 − A K−SERIES DC CHARACTERISTICS (VEE = VEE (min) − VEE (max); VCC = GND (Note 2), unless otherwise noted.) −40°C 0°C to 70°C Characteristic Symbol Min Typ Max Min Typ Max Condition Unit Output HIGH Voltage VOH −1085 −1005 −880 −1025 −955 −880 VIN = VIH(max) mV Output LOW Voltage VOL −1830 −1695 −1555 −1810 −1705 −1620 or VIL(min) mV Output HIGH Voltage VOHA −1095 − − −1035 − − VIN = VIH(min) mV Output LOW Voltage VOLA − − −1555 − − −1610 or VIL(max) mV Input HIGH Voltage VIH −1165 − −880 −1165 − −880 − mV Input LOW Voltage VIL −1810 − −1475 −1810 − −1475 − mV Input LOW Current IIL 0.5 − − 0.5 − − VIN = VIL(max) A MAXIMUM RATINGS (Note 3) Rating Symbol Value Unit Power Supply (VCC = 0 V) VEE −8.0 to 0 VDC Input Voltage (VCC = 0 V) VI 0 to −6.0 VDC Output Current Continuous Surge Iout 50 100 mA Operating Temperature Range TA −40 to +70 °C Operating Range (Notes 3 and 4) VEE −5.7 to −4.2 V NOTE: ESD data available upon request. 1. 10H circuits are designed to meet the DC specifications shown in the table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500 lfpm is maintained. Outputs are terminated through a 50 resistor to −2.0 V except where otherwise specified on the individual data sheets. 2. This table replaces the three tables traditionally seen in ECL 100 K data books. The same DC parameter values at VEE = −4.5 V now apply across the full VEE range of −4.2 V to −5.5 V. Outputs are terminated through a 50 resistor to −2.0 V except where otherwise specified on the individual data sheets. 3. Absolute maximum rating, beyond which, device life may be impaired, unless otherwise specified on an individual data sheet. 4. Parametric values specified at: H−Series: −4.20 V to −5.50 V K−Series: −4.94 V to −5.50 V

per cycle, the detector has a range of ±2 radians. difference between the V and R inputs. Figure 2. Average Output Voltage vs. Phase Difference decreased to bring the loop into lock. and the 12140 action will maintain the loop in its locked state.

MCH12140, MCK12140 http://onsemi.com PACKAGE DIMENSIONS SOIC−8 D SUFFIX CASE 751−07 ISSUE AB *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* SEATING PLANE N J X 45 K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. 751−01 THRU 751−06 ARE OBSOLETE. NEW STANDARD IS 751−07. A B S DH C 0.10 (0.004) −X− −Y− G MYM0.25 (0.010) −Z− YM0.25 (0.010) Z S X S M DIM A MIN MAX MIN MAX INCHES 4.80 5.00 0.189 0.197 MILLIMETERS B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.053 0.069 D 0.33 0.51 0.013 0.020 G 1.27 BSC 0.050 BSC H 0.10 0.25 0.004 0.010 J 0.19 0.25 0.007 0.010 K 0.40 1.27 0.016 0.050 M 0 8 0 8 N 0.25 0.50 0.010 0.020 S 5.80 6.20 0.228 0.244 1.52 0.060 7.0 0.275 0.6 0.024 1.270 0.050 4.0 0.155 mm inchesSCALE 6:1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone : 81−3−5773−3850 MCH12140/D LITERATURE FULFILLMENT : Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone : 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.