MCFT000154

MCFT000203 ETC2 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Wound Chip Ferrite Inductors Page <1> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Features:

• Very strong solderability by flow soldering, soldering iron or wave soldering.
• Highly accurate dimensions, can be mounted automatically.
• Terminals are highly resistant to pull forces.
• Highly resistant to mechanical shocks and pressure.
• Highly reliable in environments of sudden temperature change and humidity. Super Q characteristics. Applications: Micro televisions, liquid crystal televisions, video cameras, portable VCRs, car radios, car stereos, thin tape radios, televis ion tuners, mobile telephones, radio and other electronic devices. These revolutionary, highly reliable wound chip inductors for automatic mounting, have been developed in response to the trend toward high density in electronic equipment. With metal terminals and a body of heat resistant resin, these inductors offer many superior features. Figure 1 Figure 2 Size Figure A Maximum B Maximum C Maximum D Reference E E G K Maximum H Maximum I Maximum J Maximum 0805 1.02 0.76 1210 0805 1.02 0.76 Dimensions Dimensions : Millimetres

Wound Chip Ferrite Inductors Page <2> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Standard Electrical Specifications Inductance (nH) Tolerance (±%) Q Minimum Test Frequency (MHz) Self Resonant Frequency (MHz) Maximum DCResistance (ΩΩ) Maximum Rated Current (mA) 0.15 J, K 20 25.2 900 0.18 1100 0.22 550 0.25 700 0.33 0.35 650 0.47 350 0.45 600 0.68 300 0.60 500 1.00 15 7.96 280 0.80 450 1.50 250 1.05 350 2.20 110 1.10 320 3.30 60 1.50 300 4.70 45 2.10 200 6.80 36 2.70 200 10.00 10 2.52 30 4.50 180

0805 Wound Chip Inductors (Ferrite)

DC current at which the inductance drops 10% (typical) from its value without current. Operating temperature range : -25 °C to 85°C. Tolerance : J = ±5%, K = ±10%. L , Q : HP4291 for 0.12 to 10uH. SRF : HP4291. RDC : AX-1152B.

Wound Chip Ferrite Inductors Page <3> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk DC current at which the inductance drops 10% (typical) from its value without current. Operating temperature range : -25 °C to 85°C. Tolerance : J = ±5%, K = ±10%. L , Q : HP4291 for 0.12 to 10 µH. SRF : HP4291. RDC : AX-1152B. Standard Electrical Specifications

1008 Wound Chip Inductors (Ferrite)

(µµH) Tolerance (±%) Q Minimum Test Frequency (MHz) Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) 0.15 J, K 30 25.2 800 0.15 1200 0.22 600 0.25 1200 0.33 400 0.20 1100 0.47 350 0.45 900 0.68 300 0.40 800 1.00 25 7.96 245 0.50 600 1.50 182 0.65 550 2.20 105 0.95 500 3.30 55 1.15 350 4.70 43 1.28 300 6.80 39 1.60 300 10.00 2.52 33 2.30 250 15.00 24 2.70 200 22.00 18 3.30 180 33.00 16 4.00 120 47.00 18 14 5.90 110 68.00 18 12 9.50 90 100.00 12 1 8 110.00 120

Wound Chip Ferrite Inductors Page <4> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Standard Electrical Specifications

1210 Wound Chip Inductors (Ferrite)

(µµH) Tolerance (±%) Q Minimum Test Frequency (MHz) Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) 1.0 K 7.96 120 0.70 400 1.5 85 0.85 370 2.2 75 1.00 320 3.3 60 1.20 260 4.7 50 1.50 220 6.8 7.96 40 1.80 180 10.0 2.52 30 2.10 150 15.0 20 2.80 130 22.0 20 3.70 110 33.0 17 5.60 70 47.0 15 7.00 60 68.0 12 9.00 50 100.0 20 0.796 10 10.00 40 150.0 8 15.00 65 220.0 7 21.00 50 DC current at which the inductance drops 10% (typical) from its value without current. Operating temperature range : -25 °C to 85°C. Tolerance : K = ±10%, K = ±20%. L , Q : HP4291 for 0.18 µH to 82µH. HP4284 for 100µH to 220µH. SRF : HP4291. RDC : AX-1152B.

Wound Chip Ferrite Inductors Page <5> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Standard Electrical Specifications

1812 Wound Chip Inductors (Ferrite)

(µµH) Tolerance (±%) Q Minimum Test Frequency (MHz) Self Resonant Minimum Frequency (MHz) Maximum DC Resistance (ΩΩ) Rated Current (mA) 1.0 K 7.960 100.0 0.50 450 1.5 70.0 0.60 410 2.2 55.0 0.70 380 3.3 45.0 0.80 355 4.7 35.0 1.00 315 6.8 27.0 1.20 285 10.0 2.520 20.0 1.60 250 15.0 17.0 2.50 200 22.0 13.0 3.20 180 33.0 11.0 4.00 160 47.0 10.0 5.00 140 68.0 9.0 6.00 130 100.0 0.796 8.0 8.00 110 150.0 5.0 9.00 105 220.0 4.0 10.00 100 330.0 3.5 15.00 85 470.0 3.0 26.00 62 680.0 30.00 50 DC current at which the inductance drops 10% (typical) from its value without current. Operating temperature range : -25 °C to 85°C. Tolerance : K = ±10%. L , Q : HP4291 for 0.18 µH to 82µH. HP4284 for 100µH to 820µH. SRF : HP4291. RDC : AX-1152B.

Wound Chip Ferrite Inductors Page <6> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Standard Electrical Specifications Inductance (µµH) Tolerance (±%) Q Minimum Test Frequency (MHz) Self Resonant Minimum Frequency (MHz) Maximum DC Resistance (ΩΩ) Rated Current (mA) 1.0 J, K 15 L: 7.96/Q : 25.2 115 0.90 450 3.3 13 7.96 70 1.40 4.7 65 1.90 4006.8 41 2.40 10 14 31 2.70

0805 Wound Chip Inductors (Ferrite) Large Current

1008 Wound Chip Inductors (Ferrite) Large Current

(µµH) Tolerance (±%) Q Minimum Test Frequency (MHz) Self Resonant Minimum Frequency (MHz) Maximum DC Resistance (Ohm) Rated Current (mA) 1.0 J, K 7.96 245 0.35 800 1.5 25 182 0.45 550 2.2 105 0.60 3.3 55 0.75 450 4.7 45 0.90 400 6.8 40 1.00 10.0 20 2.52 35 1.50 300 15.0 24 1.90 250 22.0 18 2.80 200 33.0 16 3.50 180 DC current at which the inductance drops 10% (typical) from its value without current. Operating temperature range : -25 °C to 85°C. Tolerance : J = ±5%, K = ±10%. L , Q : HP4291. SRF : HP4291. RDC : AX-1152B.

Wound Chip Ferrite Inductors Page <7> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Standard Electrical Specifications

1812 Wound Chip Inductors (Ferrite) Large Current

(µµH) Tolerance (±%) Q Minimum Test Frequency (MHz) Self Resonant Minimum Frequency (MHz) Maximum DC Resistance (ΩΩ) Rated Current (mA) 1.0 K 7.960 200.0 0.11 1050 1.5 130.0 0.15 950 2.2 80.0 0.18 850 3.3 45.0 0.22 750 4.7 35.0 0.27 650 6.8 28.0 0.35 600 10.0 2.520 22.0 0.50 550 15.0 20.0 0.70 450 22.0 18.0 0.90 370 33.0 14.0 1.40 300 47.0 11.5 1.90 260 68.0 10.0 2.60 220 100.0 20 0.796 8.0 4.00 180 150.0 7.0 6.50 140 220.0 5.5 9.00 120 330.0 4.0 13.00 90 470.0 3.5 26.00 75 680.0 2.6 40.00 65 DC current at which the inductance drops 10% (typical) from its value without current. Operating temperature range : -25 °C to 85°C. Tolerance : K = ±10%. L , Q : HP4291 for 0.18 µH to 82µH. HP4284 for 100µH to 820µH. SRF : HP4291. RDC : AX-1152B.

Wound Chip Ferrite Inductors Page <8> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Item Specification Test Method Vibration Appearance : no damage L change : within ±10% Q change : within ±30% RDC : within specification Test device shall be soldered on the substrate Oscillation frequency: 10 to 55 to 10Hz for 1 minute Amplitude: 1.5mm Time: 2 hours for each axis (X, Y & Z), total 6 hours Resistance to soldering heat Appearance: no damage Pre-heating : 150 °C, 1 minute Solder temperature : 260 ±5 °C Immersion time : 10 ±1 second Solderability The electrodes shall be at least 90% covered with new solder coating Lead-free inductor: after fluxing (alpha 100 or equiv), inductor shall be dipped in a melted solder bath at 245 ±5 °C, 5 ±0.5 seconds. Environmental Characteristics Mechanical Performance Item Specification Test Method Temperature cycle Appearance: no damage L change: within ±10% Q change: within ±30% RDC: within specification One cycle: Total: 100 cycles Measured after exposure in the room condition for 24 hours Humidity resistance Temperature : 40 ±2 °C Relative Humidity : 90 to 95% Time : 1000 hours Measured after exposure in the room condition for 24 hours High temperature Storage Temperature : 85 ±3 °C Relative humidity : 20% Applied current : rated Current Time : 1000 hours Measured after exposure in the room condition for 24 hours Low temperature storage Temperature : -25 ±3 °C Relative humidity : 0% Time : 1000 hours Measured after exposure in the room condition for 24 hours Environmental Performance Step Temperature (°°C) Time (minute) 1 -25 ±3 30 2 25 ±2 3 3 85 ±3 30 4 25 ±2 3

Wound Chip Ferrite Inductors Page <9> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Part Number Table Description Part Number Inductor, Ferrite, 0805, 0.15uH MCFT000152 Inductor, Ferrite, 0805, 0.22uH MCFT000153 Inductor, Ferrite, 0805, 0.33uH MCFT000154 Inductor, Ferrite, 0805, 0.47uH MCFT000155 Inductor, Ferrite, 0805, 0.68uH MCFT000156 Inductor, Ferrite, 0805, 1uH MCFT000157 Inductor, Ferrite, 0805, 1.5uH MCFT000158 Inductor, Ferrite, 0805, 2.2uH MCFT000159 Inductor, Ferrite, 0805, 3.3uH MCFT000160 Inductor, Ferrite, 0805, 4.7uH MCFT000161 Inductor, Ferrite, 0805, 6.8uH MCFT000162 Inductor, Ferrite, 0805, 10uH MCFT000163 Inductor, Ferrite, 1008, 0.15uH MCFT000164 Inductor, Ferrite, 1008, 0.22uH MCFT000165 Inductor, Ferrite, 1008, 0.33uH MCFT000166 Inductor, Ferrite, 1008, 0.47uH MCFT000167 Inductor, Ferrite, 1008, 0.68uH MCFT000168 Inductor, Ferrite, 1008, 1uH MCFT000169 Inductor, Ferrite, 1008, 1.5uH MCFT000170 Inductor, Ferrite, 1008, 2.2uH MCFT000171 Inductor, Ferrite, 1008, 3.3uH MCFT000172 Inductor, Ferrite, 1008, 4.7uH MCFT000173 Inductor, Ferrite, 1008, 6.8uH MCFT000174 Inductor, Ferrite, 1008, 10uH MCFT000175 Inductor, Ferrite, 1008, 15uH MCFT000176 Inductor, Ferrite, 1008, 22uH MCFT000177 Inductor, Ferrite, 1008, 33uH MCFT000178 Inductor, Ferrite, 1008, 47uH MCFT000179 Inductor, Ferrite, 1008, 68uH MCFT000180 Inductor, Ferrite, 1008, 100uH MCFT000181 Inductor, Ferrite, 1210, 1uH MCFT000182 Inductor, Ferrite, 1210, 1.5uH MCFT000183 Inductor, Ferrite, 1210, 2.2uH MCFT000184 Inductor, Ferrite, 1210, 3.3uH MCFT000185

Wound Chip Ferrite Inductors Page <10> 18/05/09 V1.1 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group w as aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2009. Part Number Table Description Part Number Inductor, Ferrite, 1210, 4.7uH MCFT000186 Inductor, Ferrite, 1210, 6.8uH MCFT000187 Inductor, Ferrite, 1210, 10uH MCFT000188 Inductor, Ferrite, 1210, 15uH MCFT000189 Inductor, Ferrite, 1210, 22uH MCFT000190 Inductor, Ferrite, 1210, 33uH MCFT000191 Inductor, Ferrite, 1210, 47uH MCFT000192 Inductor, Ferrite, 1210, 68uH MCFT000193 Inductor, Ferrite, 1210, 100uH MCFT000194 Inductor, Ferrite, 1210, 150uH MCFT000195 Inductor, Ferrite, 1210, 220uH MCFT000196 Inductor, Ferrite, 1812, 1uH MCFT000197 Inductor, Ferrite, 1812, 1.5uH MCFT000198 Inductor, Ferrite, 1812, 2.2uH MCFT000199 Inductor, Ferrite, 1812, 3.3uH MCFT000200 Inductor, Ferrite, 1812, 4.7uH MCFT000201 Inductor, Ferrite, 1812, 6.8uH MCFT000202 Inductor, Ferrite, 1812, 10uH MCFT000203 Inductor, Ferrite, 1812, 15uH MCFT000204 Inductor, Ferrite, 1812, 22uH MCFT000205 Inductor, Ferrite, 1812, 33uH MCFT000206 Inductor, Ferrite, 1812, 47uH MCFT000207 Inductor, Ferrite, 1812, 68uH MCFT000208 Inductor, Ferrite, 1812, 100uH MCFT000209 Inductor, Ferrite, 1812, 150uH MCFT000210 Inductor, Ferrite, 1812, 220uH MCFT000211 Inductor, Ferrite, 1812, 330uH MCFT000212 Inductor, Ferrite, 1812, 470uH MCFT000213 Inductor, Ferrite, 1812, 680uH MCFT000214