MCEPI-02 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Dual In Line Switches - Piano Type MCEPX-XX-1MCEPX-XX PART NO. REVISIONS MCEP Series ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - 1.0 RELEASED AB 19/01/16 ER 19/01/16 ER 19/01/16 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negli- gence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY . DRAWN BY: DATE: DRAWING TITLE: AB 19/01/16 CHECKED BY: DATE: SIZE DWG NO. ELECTRONIC FILE REV ER 19/01/16 APPROVED BY: DATE: SCALE: U.O.M.: SHEET:ER 19/01/16 NTS A4 1.0 1 of 4mm (inch) MCEPI Dimensions : Millimetres (Inches) Dimensions Table: A mm (Inches) B mm (Inches) Part Number
Dual In Line Switches - Piano Type MCEPX-XX-1MCEPX-XX PART NO. REVISIONS MCEP Series ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - 1.0 RELEASED AB 19/01/16 ER 19/01/16 ER 19/01/16 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negli- gence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY . DRAWN BY: DATE: DRAWING TITLE: AB 19/01/16 CHECKED BY: DATE: SIZE DWG NO. ELECTRONIC FILE REV ER 19/01/16 APPROVED BY: DATE: SCALE: U.O.M.: SHEET:ER 19/01/16 NTS A4 1.0 2 of 4mm (inch) Dimensions : Millimetres (Inches) Dimensions Table: A mm (Inches) B mm (Inches) Part Number MCEPM
Dual In Line Switches - Piano Type MCEPX-XX-1MCEPX-XX PART NO. REVISIONS MCEP Series ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - 1.0 RELEASED AB 19/01/16 ER 19/01/16 ER 19/01/16 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negli- gence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY . DRAWN BY: DATE: DRAWING TITLE: AB 19/01/16 CHECKED BY: DATE: SIZE DWG NO. ELECTRONIC FILE REV ER 19/01/16 APPROVED BY: DATE: SCALE: U.O.M.: SHEET:ER 19/01/16 NTS A4 1.0 3 of 4mm (inch) Specifications: Mechanical: Max. operating force : 800 gf Operating temperature range : -20°C to +85°C Storage temperature range : -40°C to +85°C Mechanical life : 2,000 cycles Electrical: Electrical life : 2,000 cycles Rating : 25mA, 24V DC Max. contact resistance : 100mΩ at 500 V DC Max. insulation resistance : 100MΩ at 500 V DC Dielectric strength : 500V AC / 1 minute Circuit : Single pole and single throw Materials: Cover : UL 94V-0 Nylon high temperature thermoplastic Colour : Black Base : UL 94V-0 Nylon high temperature thermoplastic Colour : Black Stem : UL 94V-0 Nylon high temperature thermoplastic Colour : White Contact : Alloy copper with gold cladding Terminal : Brass with gold cladding Reflow Temperature Profile Solderability Graph: Solderability 1) MCEPI(R)-V Soldering Temperature : +245°C ±3°C Lead-Free solder : M705E JIS Z
3282 Class A
(Tin 96.5%, Silver 3%, Copper 0.5%) 2) Flux : 5 - 10 seconds. 3) Duration of solder Immersion: 5±1Sec. No anti-soldering and the coverage of dipping into solder must more than 75% was requested.
Dual In Line Switches - Piano Type MCEPX-XX-1MCEPX-XX PART NO. REVISIONS MCEP Series ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - 1.0 RELEASED AB 19/01/16 ER 19/01/16 ER 19/01/16 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negli- gence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY . DRAWN BY: DATE: DRAWING TITLE: AB 19/01/16 CHECKED BY: DATE: SIZE DWG NO. ELECTRONIC FILE REV ER 19/01/16 APPROVED BY: DATE: SCALE: U.O.M.: SHEET:ER 19/01/16 www.element14.com www.farnell.com www.newark.com NTS A4 1.0 4 of 4mm (inch) Soldering Process: Wave soldeing : Recommended solder temperature at 500°F ( 260°C) maximum of 5 seconds for through hole type Hand soldering : Use a soldering iron of 30 watts, controlled at 350°C approximately maximum 5 seconds while applying Reflow soldering : When applying reflow soldering, the peak temperature or the reflow Oven should be set at 260°C max. Do not wash the switch except top tape sealed type, which suitable for spray cleaning method from top of the s/w Part Number Table Description Number of Positions Part Number Dual In Line Switches Piano Type