MCNDS-02V MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Page <1> V1.022/04/20 DIP Switch Slide Type Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Application:
- Industrial Control
- Computer and Peripherals
- Variety of Function Controls Specifications:
- Actuator : Thermoplastic PBT UL 94V-0 – White
- Cover : Thermoplastic PBT UL 94V-0 – Red
- Contact : Copper Alloy, Gold Plated
- Terminal : Brass, Gold Plated
- Base : Thermoplastic PA66 UL 94V-0 - Black
- Current Rating : Non-Switching: 100mA, 50V DC Switching: 25mA, 24V DC
- Contact Resistance : 50mΩ max.
- Insulation Resistance : 100MΩ min. 500V DC
- Dielectric Strength : 500V AC/1 minute
- Operating Force : 1000gf max. (9.8N max.)
- Travel : 2mm
- Operating Life : 2000 cycles
- Operating Temperature : -40°C to +85°C
- Storage Temperature : -40°C to +85°C
- Shelf Life : 6 Months Test Sequence Properties Item Description Test Conditions Requirements Electric Performance
1 Visual Examination By visual examination check without any out
pressure & testing. There shall be no defects that affect the serviceability of the product.
2 Contact Resistance
- To be measured between the two terminals associated with each switch pole. 2. Measurements shall be made with a 1kHz shall current contact resistance meter. 50mΩ Max.(initial)
3 Insulation
Resistance 500V DC, 1 minute ± 5 sec. 100MΩ Min. Dielectric withstanding Voltage 500V AC(50Hz or 60Hz) shall be applied between all the adjacent terminals and between the terminal and the frame for 1 minute. There shall be no breakdown or flashover 5 Capacitance 1 MHz ±10kHz 5pF Max. Mechanical Performance 6 Operation Force Applied in the direction of operation. ON→OFF OFF→ON 1000gf Max (9.8N Max)
Page <2> V1.022/04/20 DIP Switch Slide Type Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Properties Item Description Test Conditions Requirements Mechanical Performance
7 Stop Strength
A static load of 1 kgf(9.8N) is applied in the operating direction and pulling direction operated for a period of 15 seconds. A static load of 5 kgf (49N) to apply on stem top position for a period of 15 seconds. There shall be no sign of damage mechanically There shall be no sign of electrical function out of order or damage
8 Soldering
Soldering Temperature: As shown in item 2~6 TEMP TIME 260°C ±5°C 5 ±1 sec. (PCB is 1.6mm in thickness.)
9 Vibration
Shall be vibrated in accordance with Method 201A of MIL-STD-202F 1. Frequency: 10-55-10 Hz 1 min/cycle. 2. Direction: 3 vertical directions including the direction of operation. 3. Test Time: 2 hours each direction. As shown in item 2~6
10 Shock
Shall be shocked in accordance with Method 213B condition A of MIL-STD-202F 1. Acceleration: 50G. 2. Action Time : 11 ± 1 m sec. 3. Testing Direction: 6 sides. 4. Test cycle : 3 times in each direction) As shown in item 2~6
11 Solderability
- NDS(R)-V Soldering Temperature:245 ±3°C Lead-Free solder : M705E JIS Z 3282 Class A (Tin 96.5%, Silver 3%, Copper 0.5%) 2. Flux: 5-10 seconds. 3. Duration of solder Immersion: 5 ±1 sec. No anti-soldering and the coverage of dip- ping into solder must more than 75% was requested. Durability 12 Operation Life Measurements shall be made following the test set forth below: 1. 25mA, 24V DC resistive load 2. Rate of Operation: 15~20 cycles/ minute 3. Cycle of Operation: 2000 cycles. 1. As shown in item 3,4 2. Contact Resistance: 100mΩ Max. (Final-after test) Weather Proof
13 Resistance Low
Following the test set forth below the sample shall be left in normal temperature and humidity condi- tions for an hour before measurements are made: 1. Temperature : -40°C ±3°C. 2. Time: 96 hours As shown in item 2~6
14 Resistance High
Following the test set forth below the sample shall be left in normal temperature and humidity condi- tions for an hour before measurements are made : 1. Temperature : 85°C ±2°C. 2. Time: 96 hours 1.As shown in item 3~6 2.Contact Resistance: 100mΩ Max.
15 Humidity
Following the test set forth below the sample shall be left in normal temperature and humidity condi- tions for an hour before measurements are made : 1. Temperature : 40°C ±2°C 2. Relative Humidity :90~95% 3. Time: 96 hours 1. As shown in item 4,6 2. Contact Resistance: 100mΩ Max. 3. Insulation Resistance: 10MΩ Min.
Page <3> V1.022/04/20 DIP Switch Slide Type Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Soldering Conditions Manual Soldering Soldering Temperature Max.350°C Continuous Soldering Time Max. 5 seconds Diagram Tolerances: 10mm Over ±0.2mm 10mm Below ±0.1mm 2, 5, 6, 7, 8, 9, 10, 12 POS Available Schematic (TYP.) Part Number No. of Pos. “A” mm (Inches) “B” mm (Inches) MCNDS-04V 4 11.52 (0.454) 7.62 (0.3) MCNDS-05V 5 14.06 (0.554) 10.16 (0.4) MCNDS-07V 7 19.14 (0.754) 15.24 (0.6) MCNDS-08V 8 21.68 (0.854) 17.78 (0.7) MCNDS-09V 9 24.22 (0.954) 20.32 (0.8) MCNDS-10V 10 26.76 (1.054) 22.86 (0.9) MCNDS-12V 12 31.84 (1.254) 27.94 (1.1) Precautions in Handling 1. Care should be exercised so that flux from the upper part of the printed circuit board does not adhere to the switch. 2. Don’t clean the switch body except with top tape sealed type, which can only spray of cleaning method from top of s/w. 3. There should be no flux rose over the surface of the PCB PCBFlux Dimensions : Millimetres (Inches)
Page <4> V1.022/04/20 DIP Switch Slide Type Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Part Number DIP Switch, Slide Type, 2Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-02V DIP Switch, Slide Type, 3Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-03V DIP Switch, Slide Type, 4Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-04V DIP Switch, Slide Type, 5Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-05V DIP Switch, Slide Type, 6Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-06V DIP Switch, Slide Type, 7Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-07V DIP Switch, Slide Type, 8Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-08V DIP Switch, Slide Type, 9Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-09V DIP Switch, Slide Type, 10Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-10V DIP Switch, Slide Type, 12Pos, SPST-NO, Raised Actuator, Red, TH MCNDS-12V Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.