MCCF33093 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

/C0077/C0067/C0067/C0070/C0051/C0051/C0048/C0057/C0051 SEMICONDUCTOR TECHNICAL DATA IGNITION CONTROL FLIP–CHIP Order this document from Analog Marketing BUMP CONNECTIONS 1. Ground 2. Master Bias 3. Adaptive Capacitor 4. Ramp Capacitor 5. Positive Hall Input 6. Negative Hall Input 7. Start 8. Supply 9. Distributor Signal 10. Coil 11. Output 12. Process Test 13. Emitter of Darlington 14. Stall Capacitor (Backside View) 0.116 inch x 0.091 inch Backside orientation marking indicated by arrow oriented as shown FLIP-CHIP CONFIGURATION Device Operating Temperature Range Package

ORDERING INFORMATION

MCCF33093 T A = –30° to +140°C Flip–Chip 1MOTOROLA ANALOG IC DEVICE DATA /C0080/C0114/C0111/C0100/C0117/C0099/C0116 /C0080/C0114/C0101/C0118/C0105/C0101/C0119 /C0073/C0103/C0110/C0105/C0116/C0105/C0111/C0110 /C0067/C0111/C0110/C0116/C0114/C0111/C0108 /C0070/C0108/C0105/C0112/C0262/C0067/C0104/C0105/C0112 Designed for automotive ignition applications. The MCCF33093 provides outstanding control of the ignition coil when used with an appropriate Motorola Power Darlington Transistor. Engine control systems utilizing the MCCF33093 exhibit exceptional fuel efficiency and low exhaust emissions. The MCCF33093 requires a differential Hall Sensor input for proper operation. The MCCF33093 utilizes Flip-Chip Technology in which solder bumps, rather than traditional wire bonds, are created to establish mechanical and electrical contact to the chip. This process affords a unique device having improved reliability at elevated operating temperatures.

  • Solder Bumped for Flip-Chip Assembly
  • External Capacitors to Set Device Timing
  • Overvoltage Shutdown Protection
  • Auto Start-Up Capability Once Overvoltage Condition Ceases
  • Allows for Push Start-Up in Automotive Applications
  • Ignition Coil Current Limiting
  • Ignition Coil Voltage Limiting
  • Bandgap Reference for Enhanced Stability Over Temperature
  • Negative Edge Filter for Hall Sensor Input Transient Protection
  • Hall Sensor Inputs for RPM and Position Sensing
  • –3 0°C ≤ TA ≤ +140°C Ambient Operating Temperature Simplified Block Diagram and Application Circuit 10k In (–) 10k In (+) 1.0k SW 15.3k 4.0k 0.05 0.1µF 330 Select 200 D 12V 0.1µF Adaptive Capacitor Control Ramp Capacitor Control Stall Capacitor Control Output Logic and Control Reference Generator VCC To Ignition Coil 27k This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice.  Motorola, Inc. 1996 Issue 5

2 MOTOROLA ANALOG IC DEVICE DATA

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–54543–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 MCCF33093/D /C0042/C0077/C0067/C0067/C0070/C0051/C0051/C0048/C0057/C0051/C0047/C0068/C0042