MCC2E-BPE01R MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Page <1> V1.029/06/20 C2 Emergency Stop Switch Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Specifications Mechanical Life : >0.25 million operations Electrical Life : >0.1 million operations Rated Insulation Voltage : 300V Rated Thermal Current : 5A Insulation Resistance : 100MΩ Dielectric Strength : 2,000V AC, 1 minute Panel Thickness : 0.8mm to 12mm Degree of protection : IP65 Storage Temperature : -45°C to +85°C Operating Temperature : -25°C to +55°C Contact Ratings (B300/R300) Rated Insulation Voltage 300V Rated Thermal Current 5A Operating Voltage 12V 30V 125V 250V AC Resistive Load (AC-12) 5A 5A 4A 2A 50/60 Hz Inductive Load (AC-15) 5A 5A 3A 1.5A DC Resistive Load (DC-12) 1A 1A 0.32A 0.16A Inductive Load (DC-13) 1A 1A 0.22A 0.11A Contact Block Mounting Position Contact Operator Position Configuration Mounting Position Free Push
1 NO ●
2 NO ●
1 NC ●
2 NC ●
- There are no → function for 1NO(10) & 2NO(20)
Page <2> V1.029/06/20 C2 Emergency Stop Switch Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Part Number Non-Illuminated Emergency Stop Switch, 40mm,1NO, Red MCC2E-BPE10R Non-Illuminated Emergency Stop Switch, 40mm,1NC, Red MCC2E-BPE01R Non-Illuminated Emergency Stop Switch, 40mm, 2NO, Red MCC2E-BPE20R Non-Illuminated Emergency Stop Switch, 40mm, 2NC, Red MCC2E-BPE02R Non-Illuminated Emergency Stop Switch, 40mm, 1NO+1NC, Red MCC2E-BPE11R Emergency Stop Switches Hole Dia Part Number Explanation M C C 2 E - B P E X X R Type Pull to Reset Mushroom Standard RedContact 01: 1NC 02: 2NC 10: 1NO 20: 2NO 11: 1NO+1NC Dimensions : Millimetres Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.