MC88913 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

/C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA  Motorola, Inc. 1995 1 REV 3 /C0076/C0111/C0119 /C0083/C0107/C0101/C0119 /C0067/C0077/C0079/C0083 /C0067/C0108/C0111/C0099/C0107 /C0068/C0114/C0105/C0118/C0101/C0114 The MC88913 is a high–speed, low power, hex divide–by–two D–type flip–flop with two inverting and four non–inverting outputs that have closely matched propagation delays. With a TTL compatible buffered clock input that is common to all flip–flops, the MC88913 is ideal for use in high–frequency systems as a clock driver, providing multiple outputs that are synchronous.

  • Minimum Clock Input fMAX of 110MHz
  • TTL Compatible Positive Edge–Triggered Clock
  • Matched Outputs for Synchronous Applications
  • Outputs Source/Sink 24mA
  • Part–to–Part Skew of Less Than 4.0ns
  • Guaranteed Rise and Fall Times for a Given Capacitive Load VCC GND GND CLK Q 5 Q 0 Q 4 Q 1 Q 3 Q 2 GND GND GND GND Pinout: 14–Lead Plastic (Top View) MAXIMUM RATINGS* Symbol Parameter Value Units VCC DC Supply Voltage (Referenced to GND) –0.5 to +7.0 V Vin DC Input Voltage (Referenced to GND) –0.5 to VCC + 0.5 V Vout DC Output Voltage (Referenced to GND) –0.5 to VCC + 0.5 V Iin DC Input Current, per Pin ± 20 mA Iout DC Output Sink/Source Current, per Pin ± 50 mA ICC DC V CC or GND Current per Output Pin ± 50 mA PD Power Dissipation in Still Air Plastic Package** 750 500 mW Tstg Storage Temperature –65 to +150 °C TL Lead Temperature, 1mm from Case for 10s (Plastic or SOIC Package) 260 °C * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. ** Derating: Plastic Package: –10mW/°C from 65°C to 125°C /C0077/C0067/C0056/C0056/C0057/C0049/C0051 LOW SKEW CMOS CLOCK DRIVER N SUFFIX PLASTIC PACKAGE CASE 646–06 D SUFFIX PLASTIC PACKAGE CASE 751A–03

BR1333 — REV 5 LOGIC DIAGRAM CLK Q D Q Q 0 CLK D Q Q 1 CLK D Q Q 2 CLK D Q Q 3 CLK D Q Q 4 CLK D Q Q 5 CLK NOTE: This diagram is provided only for understanding of logic operation and should not be used to estimate propagation delays RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit VCC DC Supply Voltage (Referenced to GND) 2.0 6.0 V Vin, Vout DC Input Voltage, Output Voltage (Referenced to GND) 0 VCC V TA Operating Temperature –40 +85 °C tr, tf Input Rise and Fall Time Vin from 0.8 to 2.0V Vmeas from 0.8 to 2.0V 8.0 ns/V DC CHARACTERISTICS (unless otherwise specified) Symbol Parameter Unit Condition ICC Maximum Quiescent Supply Current 80 µA VIN = VCC or GND VCC = 5.5V, TA = Worst Case ICC Maximum Quiescent Supply Current 8.0 µA VIN = VCC or GND VCC = 5.5V, TA = 25°C ICCT Maximum Additional ICC /Input 1.5 mA VIN = VCC –2.1V VCC = 5.5V, TA = Worst Case AC OPERATING REQUIREMENTS TA = 25°C C L = 50 pF TA = –40 to +85°C C L = 50 pF Symbol Parameter VCC (V) Min Max Min Max Unit tW CLK Pulse Width (HIGH to LOW) 5.0 3.0 3.0 ns CAPACITANCE Symbol Parameter Typ Unit Condition C IN Input Capacitance 4.5 pF VCC = 5.0V C PD Power Dissipation Capacitance 30 pF VCC = 5.0V

BR1333 — REV 5

3 MOTOROLA

TA = +25°C TA = –40 to +85°C Symbol Parameter VCC Typ Guaranteed Max Unit Conditions VIH Minimum High Level Input Voltage 4.5 5.5 1.5 1.5 2.0 2.0 2.0 2.0 V VOUT = 0.1V or VCC – 0.1V VIL Maximum Low Level Input Voltage 4.5 5.5 1.5 1.5 0.8 0.8 0.8 0.8 V VOUT = 0.1V or VCC – 0.1V VOH Minimum High Level 4.5 5.5 4.49 5.49 4.4 5.4 4.4 5.4 V IOUT = –50µA 4.5 5.5 3.86 4.86 3.76 4.76 V *VIN = VIL or VIH IOH = –24mA –24mA VOL Maximum Low Level Output Voltage 4.5 5.5 0.001 0.001 0.1 0.1 0.1 0.1 V IOUT = 50µA 4.5 5.5 0.36 0.36 0.44 0.44 V *VIN = VIL or VIH IOH = 24mA 24mA IIN Maximum Input 5.5 ±0.1 ±0.1 µA VI = VCC , GND ICCT Maximum ICC /Input 5.5 0.6 1.5 mA VI = VCC –2.1V IOLD Minimum Dynamic Output Current** 5.5 75 mA VOLD = 1.65V IOHD 5.5 –75 mA VOHD = 3.85V * All outputs loaded; thresholds on inputs associated with output under test. ** Maximum test duration 20ms, one output at a time. AC CHARACTERISTICS (VCC = 5.0V ±10%) TA = 25°C C L = 50 pF TA = –40 to +85°C C L = 50 pF Symbol Parameter VCC (V) Min Max Min Max Unit fMAX Maximum Clock Frequency (50% Duty Cycle) 5.0 110 110 MHz tPLH , tPHL Propagation Delay CLK to Qn, Qn tPV Propagation Delay Variation CLK to Q0, Q1, Q2 (see Note 1) 5.0 4.0 5.0 ns Propagation Delay Variation CLK to All Outputs (see Note 1) 5.0 4.5 5.5 ns tPS Propagation Delay Skew (Q0, Q1, Q2) |tPHL Actual – tPLH Actual| 5.0 1.0 1.0 ns Propagation Delay Skew (All Outputs) |tPHL Actual – tPLH Actual| 5.0 1.5 1.5 ns tOS Output–to–Output Skew (Q0, Q1, Q2) |tp Qn – tp Qm | (see Note 2) 5.0 1.0 1.0 ns Output–to–Output Skew (All Outputs) |tp Qn – tp Qm | (see Note 2) 5.0 1.5 1.5 ns trise tfall Rise/Fall Time for Q0, Q1, Q2 (0.2 x VCC to 0.8 x VCC ) 5.0 3.0 4.0 ns Rise/Fall Time for All Outputs (0.2 x VCC to 0.8 x VCC ) 5.0 3.5 4.5 ns 1. For a given set of conditions (i.e., capacitive load, temperature and VCC ) the variation from device to device is guaranteed to be less than or equal to the maximum. 2. Where tp Qn and tp Qm are the actual propagation delays (any combination of HIGH or LOW) for any two separate outputs from a given high transition of CLK.

BR1333 — REV 5 OUTLINE DIMENSIONS N SUFFIX PLASTIC PACKAGE CASE 646–06 ISSUE L D SUFFIX PLASTIC SOIC PACKAGE CASE 751A–03 ISSUE F 18.16 6.10 3.69 0.38 1.02 1.32 0.20 2.92 0.39 19.56 6.60 4.69 0.53 1.78 2.41 0.38 3.43 1.01

2.54 BSC

7.62 BSC

0.715 0.240 0.145 0.015 0.040 0.052 0.008 0.115 0.015 SEATING PLANE

0.100 BSC

0.300 BSC

0.770 0.260 0.185 0.021 0.070 0.095 0.015 0.135 0.039 A B C D F G H J K L M N NOTES: 1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE POSITION AT SEATING PLANE AT MAXIMUM MATERIAL CONDITION. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 4. ROUNDED CORNERS OPTIONAL. 14 8 B A F HG D N K C L J M MIN MIN MAX MAX MILLIMETERS INCHES DIM A B C D F G J K M P R 8.55 3.80 1.35 0.35 0.40 0.19 0.10 5.80 0.25 8.75 4.00 1.75 0.49 1.25 0.25 0.25 6.20 0.50 0.337 0.150 0.054 0.014 0.016 0.008 0.004 0.228 0.010 0.344 0.157 0.068 0.019 0.049 0.009 0.009 0.244 0.019 1.27 BSC 0.050 BSC NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. P 7 PL G C KSEATING PLANE D 14 PL M J R X 45° 1 7 814 0.25 (0.010) T B AM S S B0.25 (0.010)M M F How to reach us: USA/EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. MC88913/D /C0042/C0077/C0067/C0056/C0056/C0057/C0049/C0051/C0047/C0068/C0042 ◊ CODELINE