MC7800 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 32
Technical content
Semiconductor Components Industries, LLC, 2005 April, 2005 − Rev. 14
1 Publication Order Number:
MC7800, MC7800A, NCV7805
1.0 A Positive Voltage
These voltage regulators are monolithic integrated circuits designed as fixed−voltage regulators for a wide variety of applications including local, on−card regulation. These regulators employ internal current limiting, thermal shutdown, and safe−area compensation. With adequate heatsinking they can deliver output currents in excess of 1.0 A. Although designed primarily as a fixed voltage regulator, these devices can be used with external components to obtain adjustable voltages and currents.
- Output Current in Excess of 1.0 A
- No External Components Required
- Internal Thermal Overload Protection
- Internal Short Circuit Current Limiting
- Output Transistor Safe−Area Compensation
- Output V oltage Offered in 2% and 4% Tolerance
- Available in Surface Mount D2PAK−3, DPAK−3 and Standard 3−Lead Transistor Packages
- NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes
- Pb−Free Packages are Available MAXIMUM RATINGS (TA = 25°C, unless otherwise noted) Value Unit Rating Symbol 369C 221A 936 Input Voltage (5.0 − 18 V) (24 V) VI 35 Vdc Power Dissipation PD Internally Limited W Thermal Resistance, Junction−to−Ambient R JA 92 65 Figure °C/W Thermal Resistance, Junction−to−Case R JC 5.0 5.0 5.0 °C/W Storage Junction Temperature Range Tstg −65 to +150 °C Operating Junction Temperature TJ +150 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. *This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MIL_STD_883, Method 3015. Machine Model Method 200 V. TO−220−3 T SUFFIX CASE 221A D 2PAK−3 D2T SUFFIX CASE 936 See detailed ordering and shipping information in the package dimensions section on page 22 of this data sheet.
ORDERING INFORMATION
connected to Pin 2. Pin 1. Input 2. Ground 3. Output Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2. STANDARD APPLICATION A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0 V above the output voltage even during the low point on the input ripple voltage. XX, MC78XXInput C in*
0.33 F CO**
These two digits of the type number indicate nominal voltage. C in is required if regulator is located an appreciable distance from power supply filter. C O is not needed for stability; however, it does improve transient response. Values of less than 0.1 F could cause instability. See general marking information in the device marking section on page 28 of this data sheet. DEVICE MARKING INFORMATION DPAK−3 DT SUFFIX CASE 369C http://onsemi.com 1 2
30 PC2
Figure 1. Representative Schematic Diagram This device contains 22 active transistors.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 10 V, IO = 500 mA, TJ = Tlow to Thigh (Note 1), unless otherwise noted) MC7805B, NCV7805 MC7805C Characteristic Symbol Min Typ Max Min Typ Max Unit Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W)
7.0 Vdc ≤ Vin ≤ 20 Vdc
8.0 Vdc ≤ Vin ≤ 20 Vdc
4.75 5.0 5.25 4.75 5.0 5.25 Vdc Line Regulation (Note 4) 7.5 Vdc ≤ Vin ≤ 20 Vdc, 1.0 A
8.0 Vdc ≤ Vin ≤ 12 Vdc
5.0 1.3 100 0.5 0.8 mV Load Regulation (Note 4) 5.0 mA ≤ IO ≤ 1.0 A 5.0 mA ≤ IO ≤ 1.5 A (TA = 25°C) Reg load 1.3 0.15 100 1.3 1.3 mV Quiescent Current IB − 3.2 8.0 − 3.2 6.5 mA Quiescent Current Change
7.0 Vdc ≤ Vin ≤ 25 Vdc
5.0 mA ≤ IO ≤ 1.0 A (TA = 25°C) IB 0.5 0.3 0.08 1.0 0.8 mA Ripple Rejection
8.0 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz
RR − 68 − 62 83 − dB Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc Output Noise Voltage (TA = 25°C)
10 Hz ≤ f ≤ 100 kHz
Vn − 10 − − 10 − V/VO Output Resistance f = 1.0 kHz rO − 0.9 − − 0.9 − m Short Circuit Current Limit (TA = 25°C) Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A Average Temperature Coefficient of Output VoltageTCV O − −0.3 − − −0.3 − mV/°C 1. Tlow =0 °C for MC78XXAC, C, Thigh = +125°C for MC78XXAC, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 2. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 10 V, IO = 1.0 A, TJ = Tlow to Thigh (Note 3), unless otherwise noted) MC7805AB/MC7805AC Characteristic Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 4.9 5.0 5.1 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W)
7.5 Vdc ≤ Vin ≤ 20 Vdc
VO 4.8 5.0 5.2 Vdc Line Regulation (Note 4) Reg line mV 7.5 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA − 0.5 10 8.0 Vdc ≤ Vin ≤ 12 Vdc, IO = 1.0 A − 0.8 12 8.0 Vdc ≤ Vin ≤ 12 Vdc, IO = 1.0 A, TJ = 25°C − 1.3 4.0 7.3 Vdc ≤ Vin ≤ 20 Vdc, IO = 1.0 A, TJ = 25°C − 4.5 10 Load Regulation (Note 4) Reg load mV 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 1.3 25 5.0 mA ≤ IO ≤ 1.0 A − 0.8 25 250 mA ≤ IO ≤ 750 mA − 0.53 15 Quiescent Current IB − 3.2 6.0 mA Quiescent Current Change IB mA 8.0 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA − 0.3 0.8 7.5 Vdc ≤ Vin ≤ 20 Vdc, TJ = 25°C − − 0.8 5.0 mA ≤ IO ≤ 1.0 A − 0.08 0.5 Ripple Rejection
8.0 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz, IO = 500 mA
RR 68 83 − dB Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − V/VO Output Resistance (f = 1.0 kHz) rO − 0.9 − m Short Circuit Current Limit (TA = 25°C) Vin = 35 Vdc ISC − 0.2 − A Peak Output Current (TJ = 25°C) Imax − 2.2 − A Average Temperature Coefficient of Output Voltage TCV O − −0.3 − mV/°C 3. Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 4. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 11 V, IO = 500 mA, TJ = Tlow to Thigh (Note 5), unless otherwise noted) MC7806B MC7806C Characteristic Symbol Min Typ Max Min Typ Max Unit Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc 8.0 Vdc ≤ Vin ≤ 21 Vdc − − − 5.7 6.0 6.3 9.0 Vdc ≤ Vin ≤ 21 Vdc 5.7 6.0 6.3 − − − Line Regulation, TJ = 25°C (Note 6) Reg line mV 8.0 Vdc ≤ Vin ≤ 25 Vdc − 5.5 120 − 0.5 24 9.0 Vdc ≤ Vin ≤ 13 Vdc − 1.4 60 − 0.8 12 Load Regulation, TJ = 25°C (Note 6) Reg load − 1.3 120 − 1.3 30 mV 5.0 mA ≤ IO ≤ 1.5 A Quiescent Current (TJ = 25°C) IB − 3.3 8.0 − 3.3 8.0 mA Quiescent Current Change IB mA 8.0 Vdc ≤ Vin ≤ 25 Vdc − − − − 0.3 1.3 Ripple Rejection RR − 65 − 58 65 − dB
9.0 Vdc ≤ Vin ≤ 19 Vdc, f = 120 Hz
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − − 10 − V/VO Output Resistance f = 1.0 kHz rO − 0.9 − − 0.9 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A Average Temperature Coefficient of Output Voltage 5. Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, NCV7805 = −40°C for MC78XXB, MC78XXAB, NCV7805 6. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 11 V, IO = 1.0 A, TJ = Tlow to Thigh (Note 7), unless otherwise noted) MC7806AC Characteristic Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 5.88 6.0 6.12 Vdc
8.6 Vdc ≤ Vin ≤ 21 Vdc
Line Regulation (Note 8) Reg line mV 8.6 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA − 5.0 12 9.0 Vdc ≤ Vin ≤ 13 Vdc, IO = 1.0 A − 1.4 15 Load Regulation (Note 8) Reg load mV 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 1.3 25 5.0 mA ≤ IO ≤ 1.0 A − 0.9 25 250 mA ≤ IO ≤ 750 mA − 0.2 15 Quiescent Current IB − 3.3 6.0 mA Quiescent Current Change IB mA 9.0 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA − − 0.8 9.0 Vdc ≤ Vin ≤ 21 Vdc, IO = 1.0 A, TJ = 25°C − − 0.8 Ripple Rejection RR 58 65 − dB
9.0 Vdc ≤ Vin ≤ 19 Vdc, f = 120 Hz, IO = 500 mA
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − V/VO Output Resistance (f = 1.0 kHz) rO − 0.9 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − A Average Temperature Coefficient of Output Voltage TCV O − −0.3 − mV/°C 7. Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 8. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 500 mA, TJ = Tlow to Thigh (Note 9), unless otherwise noted) MC7808B MC7808C Characteristic Symbol Min Typ Max Min Typ Max Unit Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc 10.5 Vdc ≤ Vin ≤ 23 Vdc − − − 7.6 8.0 8.4 11.5 Vdc ≤ Vin ≤ 23 Vdc 7.6 8.0 8.4 − − − Line Regulation, TJ = 25°C, (Note 10) Reg line mV 10.5 Vdc ≤ Vin ≤ 25 Vdc − 6.0 160 − 6.0 32 11 Vdc ≤ Vin ≤ 17 Vdc − 1.7 80 − 1.7 16 Load Regulation, TJ = 25°C (Note 10) Reg load − 1.4 160 − 1.4 35 mV 5.0 mA ≤ IO ≤ 1.5 A Quiescent Current IB − 3.3 8.0 − 3.3 8.0 mA Quiescent Current Change IB mA 10.5 Vdc ≤ Vin ≤ 25 Vdc − − − − − 1.0 Ripple Rejection RR − 62 − 56 62 − dB
11.5 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − − 10 − V/VO Output Resistance f = 1.0 kHz rO − 0.9 − − 0.9 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A Average Temperature Coefficient of Output VoltageTCV O − −0.4 − − −0.4 − mV/°C 9. Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 10.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 1.0 A, TJ = Tlow to Thigh (Note 11), unless otherwise noted) MC7808AB/MC7808AC Characteristic Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 7.84 8.0 8.16 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W)
10.6 Vdc ≤ Vin ≤ 23 Vdc
VO 7.7 8.0 8.3 Vdc Line Regulation (Note 12)
10.6 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA
11 Vdc ≤ Vin ≤ 17 Vdc, IO = 1.0 A
10.4 Vdc ≤ Vin ≤ 23 Vdc, TJ = 25°C
6.0 1.7 5.0 mV Load Regulation (Note 12) 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C 5.0 mA ≤ IO ≤ 1.0 A 250 mA ≤ IO ≤ 750 mA Reg load 1.4 1.0 0.22 mV Quiescent Current IB − 3.3 6.0 mA Quiescent Current Change
11 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA
10.6 Vdc ≤ Vin ≤ 23 Vdc, IO = 1.0 A, TJ = 25°C 5.0 mA ≤ IO ≤ 1.0 A IB 0.8 0.8 0.5 mA Ripple Rejection 11.5 Vdc ≤ Vin ≤ 21.5 Vdc, f = 120 Hz, IO = 500 mA RR 56 62 − dB Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − V/VO Output Resistance f = 1.0 kHz rO − 0.9 − m Short Circuit Current Limit (TA = 25°C) Vin = 35 Vdc ISC − 0.2 − A Peak Output Current (TJ = 25°C) Imax − 2.2 − A Average Temperature Coefficient of Output Voltage TCV O − −0.4 − mV/°C 11. Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 12.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 15 V, IO = 500 mA, TJ = Tlow to Thigh (Note 13), unless otherwise noted) MC7809B MC7809C Characteristic Symbol Min Typ Max Min Typ Max Unit Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc Line Regulation, TJ = 25°C (Note 14) Reg line mV 11 Vdc ≤ Vin ≤ 26 Vdc − 6.2 32 − 6.2 32 11.5 Vdc ≤ Vin ≤ 17 Vdc − 1.8 16 − 1.8 16 Load Regulation, TJ = 25°C (Note 14) Reg load − 1.5 35 − 1.5 35 mV 5.0 mA ≤ IO ≤ 1.5 A Quiescent Current IB − 3.4 8.0 − 3.4 8.0 mA Quiescent Current Change IB mA 11.5 Vdc ≤ Vin ≤ 26 Vdc − − 1.0 − − 1.0 Ripple Rejection RR 56 61 − 56 61 − dB 11.5 Vdc ≤ Vin ≤ 21.5 Vdc, f = 120 Hz Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − − 10 − V/VO Output Resistance f = 1.0 kHz rO − 1.0 − − 1.0 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A Average Temperature Coefficient of Output VoltageTCV O − −0.5 − − −0.5 − mV/°C 13.Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 14.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 15 V, IO = 1.0 A, TJ = 0°C to 125°C, unless otherwise noted) MC7809AC Characteristic Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 8.82 9.0 9.18 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W)
11.5 Vdc ≤ Vin ≤ 24 Vdc
VO 8.65 9.0 9.35 Vdc Line Regulation (Note 15)
11.5 Vdc ≤ Vin ≤ 26 Vdc, IO = 500 mA
12 Vdc ≤ Vin ≤ 17 Vdc, IO = 1.0 A
11.5 Vdc ≤ Vin ≤ 24 Vdc, TJ = 25°C
6.2 1.8 5.2 7.0 mV Load Regulation (Note 15) 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C 5.0 mA ≤ IO ≤ 1.0 A 250 mA ≤ IO ≤ 750 mA Reg load mV Quiescent Current IB − 3.3 6.0 mA Quiescent Current Change 11.5 Vdc ≤ Vin ≤ 24 Vdc, IO = 1.0 A, TJ = 25°C 5.0 mA ≤ IO ≤ 1.0 A IB 0.8 0.8 0.5 mA Ripple Rejection 11.5 Vdc ≤ Vin ≤ 21.5 Vdc, f = 120 Hz, IO = 500 mA RR 56 61 − dB Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI _ VO 2.0 Vdc Output Noise Voltage (TA = 25°C) − 10 − V/VO Output Resistance f = 1.0 kHz rO − 1.0 − m Short Circuit Current Limit (TA = 25°C) Vin = 35 Vdc ISC − 0.2 A Peak Output Current (TJ = 25°C) Imax − 2.2 − A Average Temperature Coefficient of Output Voltage TCV O − −0.5 − mV/°C 15.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 19 V, IO = 500 mA, TJ = Tlow to Thigh (Note 16), unless otherwise noted) MC7812B MC7812C Characteristic Symbol Min Typ Max Min Typ Max Unit Output Voltage (TJ = 25°C) VO 11.5 12 12.5 11.5 12 12.5 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc 14.5 Vdc ≤ Vin ≤ 27 Vdc − − − 11.4 12 12.6 15.5 Vdc ≤ Vin ≤ 27 Vdc 11.4 12 12.6 − − − Line Regulation, TJ = 25°C (Note 17) Reg line mV 14.5 Vdc ≤ Vin ≤ 30 Vdc − 7.5 240 − 3.8 24 16 Vdc ≤ Vin ≤ 22 Vdc − 2.2 120 − 0.3 24 14.8 Vdc ≤ Vin ≤ 27 Vdc, IO = 1.0 A − − − − − 48 Load Regulation, TJ = 25°C (Note 17) Reg load − 1.6 240 − 8.1 60 mV 5.0 mA ≤ IO ≤ 1.5 A Quiescent Current IB − 3.4 8.0 − 3.4 6.5 mA Quiescent Current Change IB mA 14.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − − − − − 0.7 15 Vdc ≤ Vin ≤ 30 Vdc − − 1.0 − − 0.8 Ripple Rejection RR − 60 − 55 60 − dB
15 Vdc ≤ Vin ≤ 25 Vdc, f = 120 Hz
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − − 10 − V/VO Output Resistance f = 1.0 kHz rO − 1.1 − − 1.1 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A Average Temperature Coefficient of Output VoltageTCV O − −0.8 − − −0.8 − mV/°C 16.Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 17.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 19 V, IO = 1.0 A, TJ = Tlow to Thigh (Note 18), unless otherwise noted) MC7812AB/MC7812AC Characteristic Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 11.75 12 12.25 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO 11.5 12 12.5 Vdc
14.8 Vdc ≤ Vin ≤ 27 Vdc
Line Regulation (Note 19) Reg line mV 14.8 Vdc ≤ Vin ≤ 30 Vdc, IO = 500 mA − 3.8 18 16 Vdc ≤ Vin ≤ 22 Vdc, IO = 1.0 A − 2.2 20 14.5 Vdc ≤ Vin ≤ 27 Vdc, TJ = 25°C − 6.0 120 Load Regulation (Note 19) Reg load mV 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − − 25 5.0 mA ≤ IO ≤ 1.0 A − − 25 Quiescent Current IB − 3.4 6.0 mA Quiescent Current Change IB mA 15 Vdc ≤ Vin ≤ 30 Vdc, IO = 500 mA − − 0.8 14.8 Vdc ≤ Vin ≤ 27 Vdc, TJ = 25°C − − 0.8 Ripple Rejection RR 55 60 − dB
15 Vdc ≤ Vin ≤ 25 Vdc, f = 120 Hz, IO = 500 mA
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − V/VO Output Resistance (f = 1.0 kHz) rO − 1.1 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − A Average Temperature Coefficient of Output Voltage TCV O − −0.8 − mV/°C 18.Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 19.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 23 V, IO = 500 mA, TJ = Tlow to Thigh (Note 20), unless otherwise noted) MC7815B MC7815C Characteristic Symbol Min Typ Max Min Typ Max Unit Output Voltage (TJ = 25°C) VO 14.4 15 15.6 14.4 15 15.6 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc 17.5 Vdc ≤ Vin ≤ 30 Vdc − − − 14.25 15 15.75 18.5 Vdc ≤ Vin ≤ 30 Vdc 14.25 15 15.75 − − − Line Regulation, TJ = 25°C (Note 21) Reg line mV 17.9 Vdc ≤ Vin ≤ 30 Vdc − 8.5 300 − 8.5 30 20 Vdc ≤ Vin ≤ 26 Vdc − 3.0 150 − 3.0 28 Load Regulation, TJ = 25°C (Note 21) Reg load − 1.8 300 − 1.8 55 mV 5.0 mA ≤ IO ≤ 1.5 A Quiescent Current IB − 3.5 8.0 − 3.5 6.5 mA Quiescent Current Change IB mA 17.5 Vdc ≤ Vin ≤ 30 Vdc − − − − − 0.8 17.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − − 1.0 − − 0.7 Ripple Rejection RR − 58 − 54 58 − dB 18.5 Vdc ≤ Vin ≤ 28.5 Vdc, f = 120 Hz Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − − 10 − V/VO Output Resistance f = 1.0 kHz rO − 1.2 − − 1.2 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A Average Temperature Coefficient of Output VoltageTCV O − −1.0 − − −1.0 − mV/°C 20.Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 21.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 23 V, IO = 1.0 A, TJ = Tlow to Thigh (Note 22), unless otherwise noted) MC7815AB/MC7815AC Characteristic Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 14.7 15 15.3 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO 14.4 15 15.6 Vdc
17.9 Vdc ≤ Vin ≤ 30 Vdc
Line Regulation (Note 23) Reg line mV 17.9 Vdc ≤ Vin ≤ 30 Vdc, IO = 500 mA − 8.5 20 20 Vdc ≤ Vin ≤ 26 Vdc − 3.0 22 17.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − 7.0 20 Load Regulation (Note 23) Reg load mV 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 1.8 25 5.0 mA ≤ IO ≤ 1.0 A − 1.5 25 250 mA ≤ IO ≤ 750 mA − 1.2 15 Quiescent Current IB − 3.5 6.0 mA Quiescent Current Change IB mA 17.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 500 mA − − 0.8 17.5 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − − 0.8 Ripple Rejection RR 60 80 − dB 18.5 Vdc ≤ Vin ≤ 28.5 Vdc, f = 120 Hz, IO = 500 mA Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − V/VO Output Resistance f = 1.0 kHz rO − 1.2 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − A Average Temperature Coefficient of Output Voltage TCV O − −1.0 − mV/°C 22.Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 23.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 27 V, IO = 500 mA, TJ = Tlow to Thigh (Note 24), unless otherwise noted) MC7818B MC7818C Characteristic Symbol Min Typ Max Min Typ Max Unit Output Voltage (TJ = 25°C) VO 17.3 18 18.7 17.3 18 18.7 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc 21 Vdc ≤ Vin ≤ 33 Vdc − − − 17.1 18 18.9 22 Vdc ≤ Vin ≤ 33 Vdc 17.1 18 18.9 − − − Line Regulation, (Note 25) Reg line mV 21 Vdc ≤ Vin ≤ 33 Vdc − 9.5 360 − 9.5 50 24 Vdc ≤ Vin ≤ 30 Vdc − 3.2 180 − 3.2 25 Load Regulation, (Note 25) Reg load − 2.0 360 − 2.0 55 mV 5.0 mA ≤ IO ≤ 1.5 A Quiescent Current IB − 3.5 8.0 − 3.5 6.5 mA Quiescent Current Change IB mA 21 Vdc ≤ Vin ≤ 33 Vdc − − − − − 1.0 Ripple Rejection RR − 57 − 53 57 − dB
22 Vdc ≤ Vin ≤ 33 Vdc, f = 120 Hz
Dropout Voltage (IO = 1.0 A, TJ = 25°C) ViI − VO − 2.0 − − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − − 10 − V/VO Output Resistance f = 1.0 kHz rO − 1.3 − − 1.3 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A Average Temperature Coefficient of Output VoltageTCV O − −1.5 − − −1.5 − mV/°C 24.Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 25.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 27 V, IO = 1.0 A, TJ = Tlow to Thigh (Note 26), unless otherwise noted) MC7818AC Characteristic Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 17.64 18 18.36 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO 17.3 18 18.7 Vdc
21 Vdc ≤ Vin ≤ 33 Vdc
Line Regulation (Note 27) Reg line mV 21 Vdc ≤ Vin ≤ 33 Vdc, IO = 500 mA − 9.5 22 24 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A − 3.2 25 24 Vdc ≤ Vin ≤ 30 Vdc, IO = 1.0 A, TJ = 25°C − 3.2 10.5 20.6 Vdc ≤ Vin ≤ 33 Vdc, IO = 1.0 A, TJ = 25°C − 8.0 22 Load Regulation (Note 27) Reg load mV 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 2.0 25 5.0 mA ≤ IO ≤ 1.0 A − 1.8 25 250 mA ≤ IO ≤ 750 mA − 1.5 15 Quiescent Current IB − 3.5 6.0 mA Quiescent Current Change IB mA 21 Vdc ≤ Vin ≤ 33 Vdc, IO = 500 mA − − 0.8 21.5 Vdc ≤ Vin ≤ 30 Vdc, TJ = 25°C − − 0.8 Ripple Rejection RR 53 57 − dB
22 Vdc ≤ Vin ≤ 32 Vdc, f = 120 Hz, IO = 500 mA
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − V/VO Output Resistance f = 1.0 kHz rO − 1.3 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − A Average Temperature Coefficient of Output Voltage TCV O − −1.5 − mV/°C 26.Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 27.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 33 V, IO = 500 mA, TJ = Tlow to Thigh (Note 28), unless otherwise noted) MC7824B MC7824C Characteristic Symbol Min Typ Max Min Typ Max Unit Output Voltage (TJ = 25°C) VO 23 24 25 23 24 25 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO Vdc 27 Vdc ≤ Vin ≤ 38 Vdc − − − 22.8 24 25.2 28 Vdc ≤ Vin ≤ 38 Vdc 22.8 24 25.2 − − − Line Regulation, (Note 29) Reg line mV 27 Vdc ≤ Vin ≤ 38 Vdc − 11.5 480 − 2.7 60 30 Vdc ≤ Vin ≤ 36 Vdc − 3.8 240 − 2.7 48 Load Regulation, (Note 29) Reg load − 2.1 480 − 4.4 65 mV 5.0 mA ≤ IO ≤ 1.5 A Quiescent Current IB − 3.6 8.0 − 3.6 6.5 mA Quiescent Current Change IB mA 27 Vdc ≤ Vin ≤ 38 Vdc − − − − − 1.0 Ripple Rejection RR − 54 − 50 54 − dB
28 Vdc ≤ Vin ≤ 38 Vdc, f = 120 Hz
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − − 10 − V/VO Output Resistance f = 1.0 kHz rO − 1.4 − − 1.4 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − − 2.2 − A Average Temperature Coefficient of Output VoltageTCV O − −2.0 − − −2.0 − mV/°C 28.Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 29.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
MC7800, MC7800A, NCV7805 http://onsemi.com ELECTRICAL CHARACTERISTICS (Vin = 33 V, IO = 1.0 A, TJ = Tlow to Thigh (Note 30), unless otherwise noted) MC7824AC Characteristic Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 23.5 24 24.5 Vdc Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) VO 23.2 24 25.8 Vdc
27.3 Vdc ≤ Vin ≤ 38 Vdc
Line Regulation (Note 31) Reg line mV 27 Vdc ≤ Vin ≤ 38 Vdc, IO = 500 mA − 11.5 25 30 Vdc ≤ Vin ≤ 36 Vdc, IO = 1.0 A − 3.8 28 30 Vdc ≤ Vin ≤ 36 Vdc, TJ = 25°C − 3.8 12 26.7 Vdc ≤ Vin ≤ 38 Vdc, IO = 1.0 A, TJ = 25°C − 10 25 Load Regulation (Note 31) Reg load mV 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C − 2.1 15 5.0 mA ≤ IO ≤ 1.0 A − 2.0 25 250 mA ≤ IO ≤ 750 mA − 1.8 15 Quiescent Current IB − 3.6 6.0 mA Quiescent Current Change IB mA 27.3 Vdc ≤ Vin ≤ 38 Vdc, IO = 500 mA − − 0.8 27 Vdc ≤ Vin ≤ 38 Vdc, TJ = 25°C − − 0.8 Ripple Rejection RR 45 54 − dB
28 Vdc ≤ Vin ≤ 38 Vdc, f = 120 Hz, IO = 500 mA
Dropout Voltage (IO = 1.0 A, TJ = 25°C) VI − VO − 2.0 − Vdc Output Noise Voltage (TA = 25°C) Vn − 10 − V/VO Output Resistance (f = 1.0 kHz) rO − 1.4 − m Short Circuit Current Limit (TA = 25°C) ISC − 0.2 − A Vin = 35 Vdc Peak Output Current (TJ = 25°C) Imax − 2.2 − A Average Temperature Coefficient of Output Voltage TCV O − −2.0 − mV/°C 30.Tlow =0 °C for MC78XXAC, C T high = +125°C for MC78XXAC, C, NCV7805 = 40°C for MC78XXB, MC78XXAB, NCV7805 31.Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
current as the voltage across the pass transistor is increased. Figure 8. Current Regulator Figure 9. Adjustable Output Regulator Figure 10. Current Boost Regulator Figure 11. Short Circuit Protection
10 W resistor and the output voltage compliance would be the input
B 3.2 mA over line and load changes.
0.33 F R
XX = 2 digits of type number indicating voltage. four-ampere plastic power transistor is specified. XX = 2 digits of type number indicating voltage.
0.33 F Input
MC7800, MC7800A, NCV7805 http://onsemi.com DEFINITIONS Line Regulation − The change in output voltage for a change in the input voltage. The measurement is made under conditions of low dissipation or by using pulse techniques such that the average chip temperature is not significantly affected. Load Regulation − The change in output voltage for a change in load current at constant chip temperature. Maximum Power Dissipation − The maximum total device dissipation for which the regulator will operate within specifications. Quiescent Current − That part of the input current that is not delivered to the load. Output Noise Voltage − The rms ac voltage at the output, with constant load and no input ripple, measured over a specified frequency range. Long Term Stability − Output voltage stability under accelerated life test conditions with the maximum rated voltage listed in the devices’ electrical characteristics and maximum power dissipation. Device Nominal Voltage Operating Temperature Range Package Shipping† MC7805ABD2T 5.0 V T = −40°C to +125°C D 2PAK 50 Units /Rail MC7805ABD2TG D 2PAK (Pb−free)
50 Units /Rail
MC7805ABD2TR4 D 2PAK 800 / Tape & Reel MC7805ABD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7805ABT TO 220 50 Units /Rail MC7805ABTG TO 220 (Pb−free) MC7805ACD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7805ACD2TG D 2PAK (Pb−free) MC7805ACD2TR4 D 2PAK 800 / Tape & Reel MC7805ACD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7805ACT TO 220 50 Units /Rail MC7805ACTG TO 220 (Pb−free) MC7805BD2T T = −40°C to +125°C D 2PAK 50 Units /Rail MC7805BD2TG D 2PAK (Pb−free) MC7805BD2TR4 D 2PAK 800 / Tape & Reel MC7805BD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7805BDT DPAK 75 Units / Rail MC7805BDTG DPAK (Pb−free)
75 Units / Rail
MC7805BDTRK DPAK 2500 / Tape & Reel MC7805BDTRKG DPAK (Pb−free) 2500 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifi- cations Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control.
MC7800, MC7800A, NCV7805 http://onsemi.com Device Shipping†PackageOperating Temperature Range Nominal Voltage MC7805BT TO 220 50 Units /Rail MC7805BTG TO 220 (Pb−free) NCV7805BD2T* D 2PAK 50 Units /Rail NCV7805BD2TG* D 2PAK (Pb−free) NCV7805BD2TR4* D 2PAK 800 / Tape & Reel NCV7805BD2TR4G* D 2PAK (Pb−free) 800 / Tape & Reel NCV7805BT* TO 220 50 Units /Rail NCV7805BTG* TO 220 (Pb−free) MC7805CD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7805CD2TG D 2PAK (Pb−free) MC7805CD2TR4 D 2PAK 800 / Tape & Reel MC7805CD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7805CDT DPAK 75 Units / Rail MC7805CDTG DPAK (Pb−free) MC7805CDTRK DPAK 2500 / Tape & Reel MC7805CDTRKG DPAK (Pb−free) 2500 / Tape & Reel MC7805CT TO 220 50 Units /Rail MC7805CTG TO 220 (Pb−free) MC7806ACT 6.0 V T = 0°C to +125°C TO 220 50 Units /Rail MC7806ACTG TO 220 (Pb−free) MC7806BD2T T = −40°C to +125°C D 2PAK 50 Units /Rail MC7806BD2TG D 2PAK (Pb−free) MC7806BD2TR4 D 2PAK 800 / Tape & Reel MC7806BD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7806BT TO 220 50 Units /Rail MC7806BTG TO 220 (Pb−free) MC7806CT T = 0°C to +125°C TO 220 50 Units /Rail MC7806CTG TO 220 (Pb−free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifi- cations Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control.
MC7800, MC7800A, NCV7805 http://onsemi.com Device Shipping†PackageOperating Temperature Range Nominal Voltage MC7808ABD2T 8.0 V T = −40°C to +125°C D 2PAK 50 Units /Rail MC7808ABD2TG D 2PAK (Pb−free) MC7808ABD2TR4 D 2PAK 800 / Tape & Reel MC7808ABD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7808ABT TO 220 50 Units /Rail MC7808ABTG TO 220 (Pb−free) MC7808ACT T = 0°C to +125°C TO 220 50 Units /Rail MC7808ACTG TO 220 (Pb−free) MC7808BD2T T = −40°C to +125°C D 2PAK 50 Units /Rail MC7808BD2TG D 2PAK (Pb−free) MC7808BD2TR4 D 2PAK 800 / Tape & Reel MC7808BD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7808BDT DPAK 75 Units / Rail MC7808BDTG DPAK (Pb−free) MC7808BDTRK DPAK 2500 / Tape & Reel MC7808BDTRKG DPAK (Pb−free) 2500 / Tape & Reel MC7808BT TO 220 50 Units /Rail MC7808BTG TO 220 (Pb−free) MC7808CD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7808CD2TG D 2PAK (Pb−free) MC7808CD2TR4 D 2PAK 800 / Tape & Reel MC7808CD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7808CDT DPAK 75 Units / Rail MC7808CDTG DPAK (Pb−free) MC7808CDTRK DPAK 2500 / Tape & Reel MC7808CDTRKG DPAK (Pb−free) 2500 / Tape & Reel MC7808CT TO 220 50 Units /Rail MC7808CTG TO 220 (Pb−free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifi- cations Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control.
MC7800, MC7800A, NCV7805 http://onsemi.com Device Shipping†PackageOperating Temperature Range Nominal Voltage MC7809ACT 9.0 V T = 0°C to +125°C TO 220 50 Units /Rail MC7809ACTG TO 220 (Pb−free) MC7809BT T = −40°C to +125°C TO 220 50 Units /Rail MC7809BTG TO 220 (Pb−free) MC7809CD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7809CD2TG D 2PAK (Pb−free) MC7809CD2TR4 D 2PAK 800 / Tape & Reel MC7809CD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7809CT TO 220 50 Units /Rail MC7809CTG TO 220 (Pb−free) MC7812ABD2T 12 V T = −40°C to +125°C D 2PAK 50 Units /Rail MC7812ABD2TG D 2PAK (Pb−free) MC7812ABD2TR4 D 2PAK 800 / Tape & Reel MC7812ABD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7812ABT TO 220 50 Units /Rail MC7812ABTG TO 220 (Pb−free) MC7812ACD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7812ACD2TG D 2PAK (Pb−free) MC7812ACD2TR4 D 2PAK 800 / Tape & Reel MC7812ACD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7812ACT TO 220 50 Units /Rail MC7812ACTG TO 220 (Pb−free) MC7812BD2T T = −40°C to +125°C D 2PAK 50 Units /Rail MC7812BD2TG D 2PAK (Pb−free) MC7812BD2TR4 D 2PAK 800 / Tape & Reel MC7812BD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7812BDT DPAK 75 Units / Rail MC7812BDTG DPAK (Pb−free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifi- cations Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control.
MC7800, MC7800A, NCV7805 http://onsemi.com Device Shipping†PackageOperating Temperature Range Nominal Voltage MC7812BDTRK 12 V T = −40°C to +125°C DPAK 2500 / Tape & Reel MC7812BDTRKG DPAK (Pb−free) 2500 / Tape & Reel MC7812BT TO 220 50 Units /Rail MC7812BTG TO 220 (Pb−free) NCV7812BD2T * D 2PAK 50 Units /Rail NCV7812BD2TR4 * D 2PAK 800 / Tape & Reel NCV7812BT * TO 220 50 Units /Rail MC7812CD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7812CD2TG D 2PAK (Pb−free) MC7812CD2TR4 D 2PAK 800 / Tape & Reel MC7812CD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7812CDT DPAK 75 Units / Rail MC7812CDTG DPAK (Pb−free) MC7812CDTRK DPAK 2500 / Tape & Reel MC7812CDTRKG DPAK (Pb−free) 2500 / Tape & Reel MC7812CT TO 220 50 Units /Rail MC7812CTG TO 220 (Pb−free) MC7815ABD2T 15 V T = −40°C to +125°C D 2PAK 50 Units /Rail MC7815ABD2TG D 2PAK (Pb−free) MC7815ABD2TR4 D 2PAK 800 / Tape & Reel MC7815ABD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7815ABT TO 220 50 Units /Rail MC7815ABTG TO 220 (Pb−free) MC7815ACD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7815ACD2TG D 2PAK (Pb−free) MC7815ACT TO 220 50 Units /Rail MC7815ACTG TO 220 (Pb−free) MC7815BD2T T = −40°C to +125°C D 2PAK 50 Units /Rail MC7815BD2TG D 2PAK (Pb−free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifi- cations Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control.
MC7800, MC7800A, NCV7805 http://onsemi.com Device Shipping†PackageOperating Temperature Range Nominal Voltage MC7815BD2TR4 15 V T = −40°C to +125°C D 2PAK 800 / Tape & Reel MC7815BD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7815BDT DPAK 75 Units / Rail MC7815BDTG DPAK (Pb−free) MC7815BDTRK DPAK 2500 / Tape & Reel MC7815BDTRKG DPAK (Pb−free) 2500 / Tape & Reel MC7815BT TO 220 50 Units /Rail MC7815BTG TO 220 (Pb−free) MC7815CD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7815CD2TG D 2PAK (Pb−free) MC7815CD2TR4 D 2PAK 800 / Tape & Reel MC7815CD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7815CDT DPAK 75 Units / Rail MC7815CDTG DPAK (Pb−free) MC7815CDTRK DPAK 2500 / Tape & Reel MC7815CDTRKG DPAK (Pb−free) 2500 / Tape & Reel MC7815CT TO 220 50 Units /Rail MC7815CTG TO 220 (Pb−free) MC7818ACT 18 V T = 0°C to +125°C TO 220 50 Units /Rail MC7818ACTG TO 220 (Pb−free) MC7818BT T = −40°C to +125°C TO 220 50 Units /Rail MC7818BTG TO 220 (Pb−free) MC7818CD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7818CD2TR4 D 2PAK 800 / Tape & Reel MC7818CD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7818CT TO 220 50 Units /Rail MC7818CTG TO 220 (Pb−free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifi- cations Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control.
MC7800, MC7800A, NCV7805 http://onsemi.com Device Shipping†PackageOperating Temperature Range Nominal Voltage MC7824ACT 24 V T = 0°C to +125°C TO 220 50 Units /Rail MC7824ACTG TO 220 (Pb−free) MC7824BD2T T = −40°C to +125°C D 2PAK 50 Units /Rail MC7824BD2TG D 2PAK (Pb−free) MC7824BD2TR4 D 2PAK 800 / Tape & Reel MC7824BD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7824BT TO 220 50 Units /Rail MC7824BTG TO 220 (Pb−free) MC7824CD2T T = 0°C to +125°C D 2PAK 50 Units /Rail MC7824CD2TG D 2PAK (Pb−free) MC7824CD2TR4 D 2PAK 800 / Tape & Reel MC7824CD2TR4G D 2PAK (Pb−free) 800 / Tape & Reel MC7824CT TO 220 50 Units /Rail MC7824CTG TO 220 (Pb−free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifi- cations Brochure, BRD8011/D. *NCV devices: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and change control. 78xxAyD2T AWLYWW MC 78xxAyT AWLYWW xx = 05, 06, 08, 09, 12, 15, 18, or 24 y = B or C A = Assembly Location WL, L = Wafer Lot Y = Year WW = Work Week MARKING DIAGRAMS TO−220−3 T SUFFIX CASE 221A MC D 2PAK−3 D2T SUFFIX CASE 936 DPAK−3 DT SUFFIX CASE 369C 78xxy ALYWW78xxyD2T AWLYWW MC * MC 78xxyT AWLYWW *This marking diagram also applies to NCV78xx family.
MC7800, MC7800A, NCV7805 http://onsemi.com PACKAGE DIMENSIONS TO−220−3 T SUFFIX CASE 221A−09 ISSUE AA NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 12 3 D SEATING PLANE−T− C ST U R J
MC7800, MC7800A, NCV7805 http://onsemi.com PACKAGE DIMENSIONS D 2PAK−3 D2T SUFFIX CASE 936−03 ISSUE B
5 REF5 REF
V U TERMINAL 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. TAB CONTOUR OPTIONAL WITHIN DIMENSIONS A AND K. 4. DIMENSIONS U AND V ESTABLISH A MINIMUM MOUNTING SURFACE FOR TERMINAL 4. 5. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH OR GATE PROTRUSIONS. MOLD FLASH AND GATE PROTRUSIONS NOT TO EXCEED 0.025 (0.635) MAXIMUM. DIM A MIN MAX MIN MAX MILLIMETERS 0.386 0.403 9.804 10.236 INCHES B 0.356 0.368 9.042 9.347 C 0.170 0.180 4.318 4.572 D 0.026 0.036 0.660 0.914 E 0.045 0.055 1.143 1.397 F 0.051 REF 1.295 REF G 0.100 BSC 2.540 BSC H 0.539 0.579 13.691 14.707 J 0.125 MAX 3.175 MAX K 0.050 REF 1.270 REF L 0.000 0.010 0.000 0.254 M 0.088 0.102 2.235 2.591 N 0.018 0.026 0.457 0.660 P 0.058 0.078 1.473 1.981 R S 0.116 REF 2.946 REF U 0.200 MIN 5.080 MIN V 0.250 MIN 6.350 MIN A 12 3 K F B J S H D G C M0.010 (0.254) T E M L PN R −T− OPTIONAL CHAMFER D 2PAK−3 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* 8.38 0.33 1.016 0.04 17.02 0.67 10.66 0.42 3.05 0.12 5.08 0.20 mm inchesSCALE 3:1
MC7800, MC7800A, NCV7805 http://onsemi.com PACKAGE DIMENSIONS DPAK−3 DT SUFFIX CASE 369C−01 ISSUE O D A K B RV S F L G 2 PL M0.13 (0.005) T E C U J H −T− SEATING PLANE Z DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.235 0.245 5.97 6.22 B 0.250 0.265 6.35 6.73 C 0.086 0.094 2.19 2.38 D 0.027 0.035 0.69 0.88 E 0.018 0.023 0.46 0.58 F 0.037 0.045 0.94 1.14 G 0.180 BSC 4.58 BSC H 0.034 0.040 0.87 1.01 J 0.018 0.023 0.46 0.58 K 0.102 0.114 2.60 2.89 L 0.090 BSC 2.29 BSC R 0.180 0.215 4.57 5.45 S 0.025 0.040 0.63 1.01 V 0.035 0.050 0.89 1.27 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 123 5.80 0.228 2.58 0.101 1.6 0.063 6.20 0.244 3.0 0.118 6.172 0.243 mm inchesSCALE 3:1 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT*
MC7800, MC7800A, NCV7805 http://onsemi.com ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone : 81−3−5773−3850 MC7800/D LITERATURE FULFILLMENT : Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone : 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.