MC54-74HC366 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

/C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA 1 REV 6 Motorola, Inc. 1995 /C0072/C0101/C0120 /C0051/C0045/C0083/C0116/C0097/C0116/C0101 /C0073/C0110/C0118/C0101/C0114/C0116/C0105/C0110/C0103 /C0066/C0117/C0102/C0102/C0101/C0114 /C0119/C0105/C0116/C0104 /C0067/C0111/C0109/C0109/C0111/C0110 /C0069/C0110/C0097/C0098/C0108/C0101/C0115 High–Performance Silicon–Gate CMOS The MC54/74HC366 is identical in pinout to the LS366. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device is a high–speed hex buffer with 3–state outputs and two common active–low Output Enables. When either of the enables is high, the buffer outputs are placed into high–impedance states. The HC36 6 has inverting outputs.

  • Output Drive Capability: 15 LSTTL Loads
  • Outputs Directly Interface to CMOS, NMOS, and TTL
  • Operating Voltage Range: 2 to 6 V
  • Low Input Current: 1 µA
  • High Noise Immunity Characteristic of CMOS Devices
  • In Compliance with the Requirements Defined by JEDEC Standard No. 7A
  • Chip Complexity: 78 FETs or 19.5 Equivalent Gates LOGIC DIAGRAM OUTPUT ENABLE 1 1 PIN 16 = VCC PIN 8 = GNDOUTPUT ENABLE 2 /C0077/C0067/C0053/C0052/C0047/C0055/C0052/C0072/C0067/C0051/C0054/C0054 PIN ASSIGNMENT 125 OUTPUT ENABLE 2 VCC OUTPUT ENABLE 1 GND FUNCTION TABLE Inputs Output Enable Enable 1 2 A Y L L L H L L H L H X X Z X H X Z X = don’t care Z = high impedance N SUFFIX PLASTIC PACKAGE CASE 648–08 J SUFFIX CERAMIC PACKAGE CASE 620–10

ORDERING INFORMATION

MOTOROLA High–Speed CMOS Logic Data DL129 — Rev 6 ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ MAXIMUM RATINGS* ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ Value ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Unit ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ VCC ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Supply Voltage (Referenced to GND) ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ – 0.5 to + 7.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Vin ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Input Voltage (Referenced to GND) ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ – 1.5 to VCC + 1.5 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Vout ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Output Voltage (Referenced to GND) ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ – 0.5 to VCC + 0.5 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Iin ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Input Current, per Pin ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ±/n63686172000000000000000020 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ mA ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Iout ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Output Current, per Pin ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ±/n63686172000000000000000035 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ mA ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ICC ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Supply Current, VCC and GND Pins ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ±/n63686172000000000000000075 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ mA ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ PD ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Power Dissipation in Still Air, Plastic or Ceramic DIP† ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ 750 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ mW ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Tstg ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Storage Temperature ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ – 65 to + 150 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ /C0095C ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ TL ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP) (Ceramic DIP) ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎÎÎ 260 300 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ /C0095C *Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. †Derating — Plastic DIP: – 10 mW//C0095C from 65/C0095 to 125/C0095C Ceramic DIP: – 10 mW//C0095C from 100/C0095 to 125/C0095C For high frequency or heavy load considerations, see Chapter 2 of the Motorola High–Speed CMOS Data Book (DL129/D). RECOMMENDED OPERATING CONDITIONS ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Min ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Max ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Unit ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VCC ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Supply Voltage (Referenced to GND) ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 2.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Vin, Vout ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Input Voltage, Output Voltage (Referenced to GND) ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ VCC ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ TA ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Operating T emperature, All Package Types ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ – 55 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ + 125 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ /C0095C ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ tr, tf ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Input Rise and Fall Time V CC = 2.0 V (Figure 1) V CC = 4.5 V VCC = 6.0 V ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 1000 500 400 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ns DC ELECTRICAL CHARACTERISTICS (Voltages Referenced to GND) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Test Conditions ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VCC V ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Guaranteed Limit ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Unit ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Parameter ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Test Conditions ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VCC V ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ – 55 to 25/C0095C ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ /C0118 85/C0095C ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ /C0118 125/C0095C ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ Unit ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VIH ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Minimum High–Level Input Voltage ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vout = 0.1 V |Iout| /C0118 20 µA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 2.0 4.5 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 1.5 3.15 4.2 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 1.5 3.15 4.2 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 1.5 3.15 4.2 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VIL ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Maximum Low–Level Input Voltage ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vout = VCC – 0.1 V |Iout| /C0118 20 µA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 2.0 4.5 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.3 0.9 1.2 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.3 0.9 1.2 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.3 0.9 1.2 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VOH ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Minimum High–Level Output Voltage ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vin = VIL |Iout| /C0118 20 µA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 2.0 4.5 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 1.9 4.4 5.9 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 1.9 4.4 5.9 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 1.9 4.4 5.9 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vin = VIL |Iout| /C0118 6.0 mA |Iout| /C0118 7.8 mA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 4.5 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 3.98 5.48 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 3.84 5.34 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 3.70 5.20 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ VOL ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Maximum Low–Level Output Voltage ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vin = VIH |Iout| /C0118 20 µA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 2.0 4.5 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.1 0.1 0.1 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.1 0.1 0.1 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.1 0.1 0.1 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ V ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vin = VIH |Iout| /C0118 6.0 mA |Iout| /C0118 7.8 mA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 4.5 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.26 0.26 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.33 0.33 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 0.40 0.40 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ Iin ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Maximum Input Leakage Current ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vin = VCC or GND ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ±/n6368617200000000000000000.1 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ±/n6368617200000000000000001.0 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ±/n6368617200000000000000001.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ µA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ IOZ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Maximum Three–State Leakage Current ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Output in High–Impedance State Vin = VIL or VIH Vout = VCC or GND ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ±/n6368617200000000000000000.5 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ±/n6368617200000000000000005.0 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ±/n63686172000000000000000010 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ µA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ICC ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Maximum Quiescent Supply Current (per Package) ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Vin = VCC or GND Iout = 0 µA ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 6.0 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 160 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ µA NOTE: Information on typical parametric values can be found in Chapter 2 of the Motorola High–Speed CMOS Data Book (DL129/D). This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high–impedance cir- cuit. For proper operation, Vin and Vout should be constrained to the range GND /C0118 (Vin or Vout) /C0118 VCC . Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC ). Unused outputs must be left open.

3 MOTOROLA

1.For propagation delays with loads other than 50 pF, see Chapter 2 of the Motorola High–Speed CMOS Data Book (DL129/D). 2.Information on typical parametric values can be found in Chapter 2 of the Motorola High–Speed CMOS Data Book (DL129/D). Motorola High–Speed CMOS Data Book (DL129/D). Figure 1. Figure 2. Figure 3. Figure 4.

MOTOROLA High–Speed CMOS Logic Data DL129 — Rev 6 INPUT A OUTPUT ENABLE 1 OUTPUT ENABLE 2 VCC TO OTHER FIVE BUFFERS Y LOGIC DETAIL ONE OF 6 BUFFERS

High–Speed CMOS Logic Data DL129 — Rev 6

5 MOTOROLA

CASE 620–10 ISSUE V N SUFFIX PLASTIC PACKAGE CASE 648–08 ISSUE R 19.05 6.10 0.39 1.40 0.21 3.18 19.93 7.49 5.08 0.50 1.65 0.38 4.31 0.51 15° 1.01

1.27 BSC

2.54 BSC

7.62 BSC

0.750 0.240 0.015 0.055 0.008 0.125 0.785 0.295 0.200 0.020 0.065 0.015 0.170

0.050 BSC

0.100 BSC

0.300 BSC

A B C D E F G J K L M N 0.020 15° 0.040 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIM F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. 1 8 916 C KN G E F D 16 PL –SEATING PLANE M L J 16 PL 0.25 (0.010) T AM S 0.25 (0.010) T BM S MIN MIN MAX MAX INCHES MILLIMETERS DIM A B C D F G H J K L M S 18.80 6.35 3.69 0.39 1.02 0.21 2.80 7.50 0.51 19.55 6.85 4.44 0.53 1.77 0.38 3.30 7.74 10° 1.01 0.740 0.250 0.145 0.015 0.040 0.008 0.110 0.295 0.020 0.770 0.270 0.175 0.021 0.070 0.015 0.130 0.305 10° 0.040 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. B 1 8 916 F H G D 16 PL S C SEATING PLANE K J M L T A0.25 (0.010)M M How to reach us: USA/EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, T oshikatsu Otsuki, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. MC54/74HC366/D /C0042/C0077/C0067/C0053/C0052/C0047/C0055/C0052/C0072/C0067/C0051/C0054/C0054/C0047/C0068/C0042 ◊ CODELINE