MC53SMC-13 SPECTRUM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
LO (GHz) 4.0-8.0 4.0-8.0 4.0-8.0 4.0-8.0 4.0-8.0 RF (GHz) 4.0-8.0 4.0-8.0 4.0-8.0 4.0-8.0 4.0-8.0 4.0-8.0 4.0-8.0 IF (MHz) DC-1000 DC-3000 DC-4000 DC-4000 DC-4000 DC-4000 Min 25 dB Typical 5.5 dB 6.5 dB 7.5 dB 35 dB 19 dB 25 dB +2 dBm +12 dBm +7 dBm Conditions Specifications Electrical Specifications (1): Parameter SSB Conversion loss:(2) (3) Isolation LO to RF: LO to IF: RF to IF: Input 1 dB Compression Point: Input Third Order Intercept Point: LO Power: (4) Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss if IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. All dimensions are in inches and [mm]. Outline: SMCKR Model MC53SMC-13 RF 4.0 to 8.0 GHz Max 7.0 dB 8.0 dB 9.0 dB Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-753 2 Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 www.SpectrumMicrowave.com Rev. 4/26/07 4.0-8.0 4.0-8.0 4.0-8.0 Typical Performance at +25º C 4 (dB) Rel CL LO to RF Isolation -50 -40 -30 -20 -10 (dB) L to R LO to IF Isolation -50 -40 -30 -20 -10 (dB) L to I Conversion Loss (1 GHz) 8(dB) CL DC Frequency (GHz) 4.0 Relative Conversion Loss VS. IF Frequency 4.0 8.0Frequency (GHz) 4.0 8.0Frequency (GHz) 4.0 8.0Frequency (GHz)