MC4741C ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

/C0077/C0067/C0052/C0055/C0052/C0049/C0067 SEMICONDUCTOR TECHNICAL DATA DIFFERENTIAL INPUT OPERATIONAL AMPLIFIER (QUAD MC1741)

ORDERING INFORMATION

MC4741CP TA = 0° to +70°C SO–14 Plastic DIP PIN CONNECTIONS Order this document by MC4741C/D D SUFFIX PLASTIC PACKAGE CASE 751A (SO–14) P SUFFIX PLASTIC PACKAGE CASE 646 Out 3 /C0042 /C0041 Out 1 /C0042 /C0041 /C0041 /C0042 Inputs 1 (Top View) VCC Inputs 2 Out 2 Inputs 3 Inputs 4 Out 4 VEE /C0041 /C0042 1MOTOROLA ANALOG IC DEVICE DATA /C0068/C0105/C0102/C0102/C0101/C0114/C0101/C0110/C0116/C0105/C0097/C0108 /C0073/C0110/C0112/C0117/C0116 /C0079/C0112/C0101/C0114/C0097/C0116/C0105/C0111/C0110/C0097/C0108 /C0065/C0109/C0112/C0108/C0105/C0102/C0105/C0101/C0114 The MC4741C is a true quad MC1741. Integrated on a single monolithic chip are four independent, low power operational amplifiers which have been designed to provide operating characteristics identical to those of the industry standard MC1741, and can be applied with no change in circuit performance. The MC4741C can be used in applications where amplifier matching or high packing density is important. Other applications include high impedance buffer amplifiers and active filter amplifiers.

  • Each Amplifier is Functionally Equivalent to the MC1741
  • Class AB Output Stage Eliminates Crossover Distortion
  • True Differential Inputs
  • Internally Frequency Compensated
  • Short Circuit Protection
  • Low Power Supply Current (0.6 mA/Amplifier) Representative Schematic Diagram (1/4 of Circuit Shown) Offset Null Output G Noninverting Input Inverting Input VCC VEE 39 k 1.0 k 1.0 k50 k 50 k 50 4.5 k 7. 5k30 pF 5.0 k  Motorola, Inc. 1996 Rev 5

2 MOTOROLA ANALOG IC DEVICE DATA

MAXIMUM RATINGS (TA = +25°C, unless otherwise noted.) Rating Symbol Value Unit Power Supply Voltage VCC VEE +18 –18 Vdc Input Differential Voltage VID ±36 V Input Common Mode Voltage VICM ±18 V Output Short Circuit Duration tSC Continuous Operating Ambient Temperature Range TA 0 to +70 °C Storage Temperature Range Tstg –55 to +125 °C Junction Temperature TJ 150 °C High Impedance Instrumentation Buffer/Filter MC4741C R4 C1 VID R5 56 MC4741C MC4741C 1/4 MC4741C

3MOTOROLA ANALOG IC DEVICE DATA ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = –15 V, TA = 25°C, unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Input Offset Voltage (RS ≤ 10 k) VIO – 2.0 6.0 mV Input Offset Current IIO – 20 200 nA Input Bias Current IIB – 80 500 nA Input Resistance ri 0.3 2.0 – M Ω Input Capacitance C i – 1.4 – pF Offset Voltage Adjustment Range VIOR – ±15 – mV Common Mode Input Voltage Range VICR ±12 ±13 – V Large Signal Voltage Gain (VO = ±10 V, RL ≥ 2.0 k) Av 20 200 – V/mV Output Resistance ro – 75 – Ω Common Mode Rejection (RS ≤ 10 k) CMR 70 90 – dB Supply Voltage Rejection Ratio (RS ≤ 10 k) PSRR – 30 150 µV/V Output Voltage Swing VO V Output Short Circuit Current ISC – 20 – mA Supply Current – (All Amplifiers) ID – 3.5 7.0 mA Power Consumption (All Amplifiers) PC – 105 210 mW Transient Response (Unity Gain – Non–Inverting) (VI = 20 mV, RL ≥ 2 kΩ , CL ≤ 100 pF) Rise Time tTLH – 0.3 – µs (VI = 20 mV, RL ≥ 2 kΩ , CL ≤ 100 pF) Overshoot os – 15 – % (VI = 10 V, RL ≥ 2 kΩ , CL ≤ 100 pF) Slew Rate SR – 0.5 – V/µs ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = –15 V, TA = * Thigh to Tlow, unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Input Offset Voltage (RS ≤ 10 kΩ ) VIO – – 7.5 mV Input Offset Current (TA = 0° to + 70°C) IIO – – 300 nA Input Bias Current (TA = 0° to + 70°C) IIB – – 800 nA Large Signal Voltage Gain (RL ≥ 2k, VOUT = ±10 V) AV 15 – – V/mV Output Voltage Swing (RL ≥ 2 k) VO ±10 ±13 – V *T high = 70°C T low = –0°C

4 MOTOROLA ANALOG IC DEVICE DATA

Figure 1. Power Bandwidth Figure 3. Positive Output Voltage Swing Figure 4. Negative Output Voltage Swing Figure 5. Output Voltage Swing versus

30 V Supply

Figure 6. Noninverting Pulse Response

5.0 V/DIV

Figure 7. Bi–Quad Filter Figure 8. Open Loop Voltage Gain Figure 10. Absolute Value DVM Front End

2 MC1505

6 MOTOROLA ANALOG IC DEVICE DATA

CASE 646–06 ISSUE L D SUFFIX PLASTIC PACKAGE CASE 751A–03 ISSUE F (SO–14) OUTLINE DIMENSIONS NOTES: 1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE POSITION AT SEATING PLANE AT MAXIMUM MATERIAL CONDITION. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 4. ROUNDED CORNERS OPTIONAL. 14 8 B A F HG D K C N L J M SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.715 0.770 18.16 19.56 B 0.240 0.260 6.10 6.60 C 0.145 0.185 3.69 4.69 D 0.015 0.021 0.38 0.53 F 0.040 0.070 1.02 1.78 G 0.100 BSC 2.54 BSC H 0.052 0.095 1.32 2.41 J 0.008 0.015 0.20 0.38 K 0.115 0.135 2.92 3.43 L 0.300 BSC 7.62 BSC M 0 10 0 10 N 0.015 0.039 0.39 1.01 /C0095/C0095/C0095 /C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. –A– –B– G P 7 PL 14 8 M0.25 (0.010) B M SBM0.25 (0.010) A ST –T– FR X 45 SEATING PLANE D 14 PL K C JM /C0095 DIM MIN MAX MIN MAX INCHESMILLIMETERS A 8.55 8.75 0.337 0.344 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC 0.050 BSC J 0.19 0.25 0.008 0.009 K 0.10 0.25 0.004 0.009 M 0 7 0 7 P 5.80 6.20 0.228 0.244 R 0.25 0.50 0.010 0.019 /C0095/C0095/C0095/C0095 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–54543–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 MC4741C/D /C0042/C0077/C0067/C0052/C0055/C0052/C0049/C0067/C0047/C0068/C0042