RES-MC4 OHMITE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com26 MC4 Series High Voltage 4-Resistor SMD DIP Package Resistance Power @25°C Max. Operating Standard Temperature Coefficient Series Range (Ohms) per resistor Voltage 50PPM/°C 100PPM/°C MC4 200Ω to 5,000M 0.75W 2,500 200Ω-250M 251M-5,000M perforManCe data Characteristic Test Method Specification Humidity MIL-STD-202, Method 103B, Condition B ±0.25% Dielectric Withstanding Voltage MIL-STD-202, Method 301, 750V ±0.25% Insulation Resistance MIL-STD-202, Method 302, Condition A or B >10,000M or greater dry Thermal Shock MIL-STD-202, Method 107G, Condition B, B-1, or F ±0.20% Load Life MIL-STD-202, Method 108A, Condition D ±1.0% Resistance to Solvents MIL-STD-202, Method 215G No degrada- tion of coating or marking Shock (Specified Pulse) MIL-STD-202, Method 213B, Condition I ±0.25% Vibration, High Frequency MIL-STD-202, Method 204D, Condition D ±.020% Power Conditioning MIL-R-49462A, Par 4.8 ±0.50% Ohmite’s MC4 Series offers 4 high voltage SMD resistors in a single DIP package, supplied on tape and reel for automated placement. Each resistor pro- vides a rating of 0.75W with a maximum voltage of 2500 VDC. Designers can specify up to 4 different resistor value/ tolerance combinations and connect then individually, in series, or parallel to derive countless results. The flexible S-Bend ter- minals provide solder joint integrity while leaving space between the resistor pack and the PCB. Standard parts are available in single resistance values for immediate delivery. SerIeS SpeCIfICatIonS poSSIble ConfIguratIonS CharaCterIStICS Resistor Thick film on Alumina Resistance Range 200 ohms to 5,000M Power Rating 0.75W per resistor, 3.0W total Voltage Rating 2500 VDC per resistor Tolerance 5% to 20% Operating Temperature -55°C to +180°C TCR and VCR see Slim Mox Solder Silver solder is recommended for MC4 resistors. Leaching of the silver in the termination will occur if non-silver solder is used. 60/40 tin- lead solders are not recommended for use with the MC4 product. 4 individual 0.75W each
2500 VDC each
1.5W each 10,000 VDC 4 in parallel
2500 VDC
1.5W each
5000 VDC each
2.25W 0.75W 1.5W
5000 VDC
1.5W 2.25W
7500 VDC
0.75W
featureS
- Unique terminals allow spacing between board and resistor
- Design allows multiple configura- tions
- 2,500 volts max. per resistor per pack; 10KV total
- Supplied on tape & reel for automated placement
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 27 Land Pattern MC4 Series High Voltage 4-Resistor SMD DIP Package dIMenSIonS (in./mm)
orderIng InforMatIon
MC4-1003JER 100K ohms per resistor, 5% MC4-5003JER 500K ohms per resistor, 5% MC4-1004JER 1M ohms per resistor, 5% MC4-5004JER 5M ohms per resistor, 5% MC4-1005JER 10M ohms per resistor, 5% MC4-5005JER 50M ohms per resistor, 5% MC4-1006JER 100M ohms per resistor, 5% MC4-5006JER 500M ohms per resistor, 5% MC4-1007KER 1G ohms per resistor, 10% MC4-5007KER 5G ohms per resistor, 10% *Custom part numbers are assigned sequen - tially. MC4-SP0001, MC4-SP0002, etc. Go to this link to design your own MC4 resistor and have a unique part number assigned. www. ohmite.com/mc4sp/ Tape and Reel Orientation 0.676" (17.17mm) 0.71" ±.01 (18.03mm) 0.750" max. (19.05mm) 0.75" ±.01 (19.05mm) 0.190" typ. (4.8mm) 0.03" (0.76mm) MC4-1002FER MC4 Series Tolerance J= 5% K=10% P=20% Ohms First 3 digits are significant; 4th digit is multiplier (# of zeroes to follow). Examples: 1003 = 100K/uni03A9 5004 = 5M/uni03A9 1007 = 1G/uni03A9 E = RoHS compliant Tape and Reel optional 250 per reel 0.650" (16.5mm) 0.080" (2.0mm) 0.740" (18.8mm) 0.580" (14.7mm) 0.110" (2.8mm) 0.080" (2.0mm) Design online at: www.ohmite.com/mc4sp/