MC34001 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

/C0077/C0067/C0051/C0052/C0048/C0048/C0049/C0044 /C0066 /C0077/C0067/C0051/C0052/C0048/C0048/C0050/C0044 /C0066 /C0077/C0067/C0051/C0052/C0048/C0048/C0052/C0044 /C0066 JFET INPUT OPERATIONAL AMPLIFIERS Order this document by MC34001/D NC VCC Output Offset Null D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) P SUFFIX PLASTIC PACKAGE CASE 626 P SUFFIX PLASTIC PACKAGE CASE 646 MC34001 (Top View) PIN CONNECTIONS PIN CONNECTIONS MC34002 (Top View) Offset Null Noninv. Input VEE Inv. Input VEE Inputs A Inputs B Output B Output A V CC Inputs 1 Output 1 VCC Inputs 2 Output 2 Output 4 Inputs 4 VEE Inputs 3 Output 3 MC34004 (Top View) 1MOTOROLA ANALOG IC DEVICE DATA /C0074/C0070/C0069/C0084 /C0073/C0110/C0112/C0117/C0116 /C0079/C0112/C0101/C0114/C0097/C0116/C0105/C0111/C0110/C0097/C0108 /C0065/C0109/C0112/C0108/C0105/C0102/C0105/C0101/C0114/C0115 These low cost JFET input operational amplifiers combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated operational amplifier has well matched high voltage JFET input devices for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents. The Motorola BIFET family offers single, dual and quad operational amplifiers which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar devices. The MC34001/ 34002/34004 series are specified from 0° to +70°C.

  • Input Offset Voltage Options of 5.0 mV and 10 mV Maximum
  • Low Input Bias Current: 40 pA
  • Low Input Offset Current: 10 pA
  • Wide Gain Bandwidth: 4.0 MHz
  • High Slew Rate: 13 V/µs
  • Low Supply Current: 1.4 mA per Amplifier
  • High Input Impedance: 1012 Ω
  • High Common Mode and Supply Voltage Rejection Ratios: 100 dB
  • Industry Standard Pinouts

ORDERING INFORMATION

MC34001BD, D TA =0 ° to+ 70°C SO–8 Single MC34001BP , P TA = 0° to+ 70°C Plastic DIP Dual MC34002BD, D TA =0 ° to +70°C SO–8 Dual MC34002BP , P TA = 0° to +70°C Plastic DIP Quad MC34004BP , P TA = 0° to +70°C Plastic DIP  Motorola, Inc. 1996 Rev 1

MC34001, B MC34002, B MC34004, B

2 MOTOROLA ANALOG IC DEVICE DATA

Supply Voltage VCC , VEE ±18 V Differential Input Voltage (Note 1) VID ±30 V Input Voltage Range VIDR ±16 V Open Short Circuit Duration tSC Continuous Operating Ambient Temperature Range TA 0 to +70 °C Operating Junction Temperature TJ 150 °C Storage Temperature Range Tstg –65 to +150 °C NOTES: 1. Unless otherwise specified, the absolute maximum negative input voltage is equal to the negative power supply. ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = –15 V, TA = 25°C, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Input Offset Voltage (RS ≤ 10 k) MC3400XB MC3400X VIO 3.0 5.0 5.0 mV Average Temperature Coefficient of Input Offset Voltage R S ≤ 10 k, TA = Tlow to Thigh (Note 2) ΔVIO/ΔT — 10 — µV/°C Input Offset Current (VCM = 0) (Note 3) MC3400XB MC3400X IIO 100 100 pA Input Bias Current (VCM = 0) (Note 3) MC3400XB MC3400X IIB 200 200 pA Input Resistance ri — 1012 — Ω Common Mode Input Voltage Range VICR ±11 +15 –12 V Large Signal Voltage Gain (VO = ±10 V, RL = 2.0 k) MC3400XB MC3400X AVOL 150 100 V/mV Output Voltage Swing (RL ≥ 10 k) (RL ≥ 2.0 k) VO ±12 ±10 ±14 ±13 V Common Mode Rejection Ratio (RS ≤ 10 k) MC3400XB MC3400X CMRR 100 100 dB Supply Voltage Rejection Ratio (RS ≤ 10 k) (Note 4) MC3400XB MC3400X PSRR 100 100 dB Supply Current (Each Amplifier) MC3400XB MC3400X ID 1.4 1.4 2.5 2.7 mA Slew Rate (AV = 1.0) SR — 13 — V/µs Gain–Bandwidth Product GBW — 4.0 — MHz Equivalent Input Noise Voltage (RS = 100 Ω , f = 1000 Hz) en — 25 — nV/ Hz√ Equivalent Input Noise Current (f = 1000 Hz) in — 0.01 — pA/ Hz√ NOTES: 2. Tlow =0 °C for MC34001/34001B T high= +70°C for MC34001/34001B 0°C for MC34002 +70°C for MC34002 0°C for MC34004/34004B +70°C for MC34004/34004B 3. The input bias currents approximately double for every 10°C rise in junction temperature, TJ. Due to limited test time, the input bias currents are correlated to junction temperature. Use of a heatsink is recommended if input bias current is to be kept to a minimum. 4. Supply voltage rejection ratio is measured for both supply magnitudes increasing or decreasing simultaneously, in accordance with common practice.

MC34001, B MC34002, B MC34004, B 3MOTOROLA ANALOG IC DEVICE DATA ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = –15 V, TA = Tlow to Thigh [Note 2].) Characteristics Symbol Min Typ Max Unit Input Offset Voltage (RS ≤ 10 k) MC3400XB MC3400X VIO 7.0 mV Input Offset Current (VCM = 0) (Note 3) MC3400XB MC3400X IIO 4.0 4.0 nA Input Bias Current (VCM = 0) (Note 3) MC3400XB MC3400X IIB 8.0 8.0 nA Common Mode Input Voltage Range VICR ±11 — — V Large Signal (VO = ±10 V, RL = 2.0 k) MC3400XB MC3400X AVOL V/mV Output Voltage Swing (R ≥ 10 k) (R ≥ 2.0 k) VO ±12 ±10 V Common Mode Rejection Ratio (RS ≤ 10 k) MC3400XB MC3400X CMRR dB Supply Voltage Rejection Ratio (RS ≤ 10 k) (Note 4) MC3400XB MC3400X PSRR dB Supply Current (Each Amplifier) MC3400XB MC3400X ID 2.8 3.0 mA NOTES: 2. Tlow =0 °C for MC34001/34001B T high= +70°C for MC34001/34001B 0°C for MC34002 +70°C for MC34002 0°C for MC34004/34004B +70°C for MC34004/34004B 3. The input bias currents approximately double for every 10°C rise in junction temperature, TJ. Due to limited test time, the input bias currents are correlated to junction temperature. Use of a heatsink is recommended if input bias current is to be kept to a minimum. 4. Supply voltage rejection ratio is measured for both supply magnitudes increasing or decreasing simultaneously, in accordance with common practice.

4 MOTOROLA ANALOG IC DEVICE DATA

Figure 1. Input Bias Current Figure 2. Output Voltage Swing Figure 3. Output Voltage Swing Figure 4. Output Voltage Swing Figure 5. Output Voltage Swing Figure 6. Supply Current per Amplifier

6 MOTOROLA ANALOG IC DEVICE DATA

Figure 12. Output Current to Voltage Transformation from the time all bits are switched (C = 68 pF).

Figure 13. Positive Peak Detector Figure 14. Long Interval RC Timer Figure 15. Isolating Large Capacitive Loads Figure 16. Wide BW, Low Noise, interacts with feedback elements and creates undesirable high–frequency pole.

8 VCC

4 VEE

MC34001, B MC34002, B MC34004, B

8 MOTOROLA ANALOG IC DEVICE DATA

CASE 626–05 ISSUE K D SUFFIX PLASTIC PACKAGE CASE 751–05 (SO–8) ISSUE R OUTLINE DIMENSIONS NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. F NOTE 2 –A– –B– –T– SEATING PLANE H J G D K N C L M MAM0.13 (0.005) B MT DIM MIN MAX MIN MAX INCHESMILLIMETERS A 9.40 10.16 0.370 0.400 B 6.10 6.60 0.240 0.260 C 3.94 4.45 0.155 0.175 D 0.38 0.51 0.015 0.020 F 1.02 1.78 0.040 0.070 G 2.54 BSC 0.100 BSC H 0.76 1.27 0.030 0.050 J 0.20 0.30 0.008 0.012 K 2.92 3.43 0.115 0.135 L 7.62 BSC 0.300 BSC N 0.76 1.01 0.030 0.040 /C0095/C0095 SEATING PLANE A0.25 M CB SS

0.25 M B M

h /C0113 C X 45/C0095 L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.18 0.25 D 4.80 5.00 E

1.27 BSCe

3.80 4.00 H 5.80 6.20 h 0 7 L 0.40 1.25 /C0113 0.25 0.50 /C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10

MC34001, B MC34002, B MC34004, B 9MOTOROLA ANALOG IC DEVICE DATA P SUFFIX PLASTIC PACKAGE CASE 646–06 ISSUE L OUTLINE DIMENSIONS NOTES: 1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE POSITION AT SEATING PLANE AT MAXIMUM MATERIAL CONDITION. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 4. ROUNDED CORNERS OPTIONAL. 14 8 B A F HG D K C N L J M SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.715 0.770 18.16 19.56 B 0.240 0.260 6.10 6.60 C 0.145 0.185 3.69 4.69 D 0.015 0.021 0.38 0.53 F 0.040 0.070 1.02 1.78 G 0.100 BSC 2.54 BSC H 0.052 0.095 1.32 2.41 J 0.008 0.015 0.20 0.38 K 0.115 0.135 2.92 3.43 L 0.300 BSC 7.62 BSC M 0 10 0 10 N 0.015 0.039 0.39 1.01 /C0095/C0095/C0095/C0095

MC34001, B MC34002, B MC34004, B

10 MOTOROLA ANALOG IC DEVICE DATA

MC34001, B MC34002, B MC34004, B 11MOTOROLA ANALOG IC DEVICE DATA NOTES

MC34001, B MC34002, B MC34004, B

12 MOTOROLA ANALOG IC DEVICE DATA

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–54543–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 MC34001/D /C0042/C0077/C0067/C0051/C0052/C0048/C0048/C0049/C0047/C0068/C0042