MC1471 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

 Semiconductor Components Industries, LLC, 2000 April, 2000 – Rev. 6

1 Publication Order Number:

Internally Compensated, High Performance Operational Amplifier The MC1741C was designed for use as a summing amplifier, integrator, or amplifier with operating characteristics as a function of the external feedback components.

  • No Frequency Compensation Required
  • Short Circuit Protection
  • Offset V oltage Null Capability
  • Wide Common Mode and Differential V oltage Ranges
  • Low Power Consumption
  • No Latch Up Equivalent Circuit Schematic (1/4 of Circuit Shown) Offset Null Output G Noninverting Input Inverting Input VCC VEE 39k 1.0k 1.0k 50k 50k 50 4.5k 7.5k30pF 5.0k Device Package Shipping

ORDERING INFORMATION

MC1741CD SO–8 98 Units/Rail MC1741CDR2 SO–8 http://onsemi.com

2500 Tape & Reel

PDIP–8 P1 SUFFIX CASE 626 SO–8 D SUFFIX CASE 7511 MARKING DIAGRAMS ALYW 1741C AWL MC1741CP1 YYWW A = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work Week PDIP–8 PIN CONNECTIONS N.C. VCC Output Offset Null Offset Null 1 Noninv. Input VEE Inv. Input (Top View) MC1741CP1 50 Units/Rail

http://onsemi.com MAXIMUM RATINGS Rating Symbol Value Unit Power Supply Voltage VCC , VEE ±18 Vdc Input Differential Voltage VID ±30 V Input Common Mode Voltage (Note 1.) VICM ±15 V Output Short Circuit Duration (Note 2.) tSC Continuous – Operating Ambient Temperature Range TA 0 to +70 °C Storage Temperature Range Tstg –55 to +125 °C 1. For supply voltages less than +15 V, the absolute maximum input voltage is equal to the supply voltage. 2. Supply voltage equal to or less than 15 V. ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = –15 V, TA = 25°C, unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Input Offset Voltage (RS ≤ 10 k) VIO – 2.0 6.0 mV Input Offset Current IIO – 20 200 nA Input Bias Current IIB – 80 500 nA Input Resistance ri 0.3 2.0 – M Ω Input Capacitance C i – 1.4 – pF Offset Voltage Adjustment Range VIOR – ±15 – mV Common Mode Input Voltage Range VICR ±12 ±13 – V Large Signal Voltage Gain (VO = ±10 V, RL ≥ 2.0 k) AVOL 20 200 – V/mV Output Resistance ro – 75 – Ω Common Mode Rejection (RS ≤ 10 k) CMR 70 90 – dB Supply Voltage Rejection (RS ≤ 10 k) PSR 75 – – dB Output Voltage Swing VO V Output Short Circuit Current ISC – 20 – mA Supply Current ID – 1.7 2.8 mA Power Consumption PC – 50 85 mW Transient Response (Unity Gain, Noninverting) (VI = 20 mV, RL ≥ 2.0 k, CL ≤ 100 pF) Rise Time tTLH – 0.3 – µs (VI = 20 mV, RL ≥ 2.0 k, CL ≤ 100 pF) Overshoot os – 15 – % (VI = 10 V, RL ≥ 2.0 k, CL ≤ 100 pF) Slew Rate SR – 0.5 – V/µs ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = –15 V, TA = Tlow to Thigh, unless otherwise noted.)* Characteristic Symbol Min Typ Max Unit Input Offset Voltage (RS ≤ 10 kΩ ) VIO – – 7.5 mV Input Offset Current (TA = 0° to +70°C ) IIO – – 300 nA Input Bias Current (TA = 0° to +70°C ) IIB – – 800 nA Supply Voltage Rejection (RS ≤ 10 k) PSR 75 – – dB Output Voltage Swing (RL ≥ 2.0 k) VO ±10 ±13 – V Large Signal Voltage Gain (RL ≥ 2.0 k, VO = ±10 V) AVOL 15 – – V/mV * Tlow = 0°CT high = 70°C

Figure 6. Power Bandwidth Figure 7. Open Loop Frequency Response Figure 8. Positive Output Voltage Swing Figure 9. Negative Output Voltage Swing Figure 10. Output Voltage Swing versus Figure 11. Single Supply Inverting Amplifier

30 V Supply

Figure 12. Noninverting Pulse Response Figure 13. Transient Response Test Circuit Figure 14. Open Loop Voltage Gain

5.0 V/DIV

http://onsemi.com PACKAGE DIMENSIONS PDIP–8 P1 SUFFIX CASE 626–05 ISSUE K NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. F NOTE 2 –A– –B– –T– SEATING PLANE H J G D K N C L M MAM0.13 (0.005) B MT DIM MIN MAX MIN MAX INCHESMILLIMETERS A 9.40 10.16 0.370 0.400 B 6.10 6.60 0.240 0.260 C 3.94 4.45 0.155 0.175 D 0.38 0.51 0.015 0.020 F 1.02 1.78 0.040 0.070 G 2.54 BSC 0.100 BSC H 0.76 1.27 0.030 0.050 J 0.20 0.30 0.008 0.012 K 2.92 3.43 0.115 0.135 L 7.62 BSC 0.300 BSC M --- 10 --- 10 N 0.76 1.01 0.030 0.040 SO–8 D SUFFIX CASE 751–06 ISSUE T SEATING PLANE A0.25 M CB SS

0.25 M B M

h C X 45 L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.19 0.25 D 4.80 5.00 E

1.27 BSCe

3.80 4.00 H 5.80 6.20 h 0 7 L 0.40 1.25 0.25 0.50 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10

http://onsemi.com Notes

http://onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION CENTRAL/SOUTH AMERICA: Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST) Email: ONlit–spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support Phone : 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001–800–4422–3781 Email: ONlit–asia@hibbertco.com JAPAN : ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone : 81–3–5740–2745 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. MC1741C/D NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone : 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada N. American Technical Support: 800–282–9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor – European Support German Phone : (+1) 303–308–7140 (M–F 1:00pm to 5:00pm Munich Time) Email: ONlit–german@hibbertco.com French Phone : (+1) 303–308–7141 (M–F 1:00pm to 5:00pm Toulouse Time) Email: ONlit–french@hibbertco.com English Phone: (+1) 303–308–7142 (M–F 12:00pm to 5:00pm UK Time) Email: ONlit@hibbertco.com EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781 *Available from Germany, France, Italy, England, Ireland